Axiom Supply Sway Bar End Link Kit | 0-2 in Front Lift | 2001-2019 GM 2500HD/3500HD

Axiom Sway Bar End Link Kit | 0–2" Front Lift | 2001–2019 Chevy Silverado / GMC Sierra 2500HD & 3500HD

The Axiom Sway Bar End Link Kit (SKU: AXGMEL02) is a heavy-duty replacement end link kit engineered for 2001–2019 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD trucks running stock height or up to 2" of front lift. At 0–2" of lift, factory-length end links may be worn, damaged, or operating at a slightly altered angle after leveling. These heavy-duty replacement links restore correct sway bar geometry and improve roll control, reducing body sway and maintaining predictable handling on-road and off-road. Sold as a complete end link kit (both sides). Covers GMT800/GMT900 (2001–2010) and K2XX (2011–2019) platforms.

Verified Fitment (OFAS Standard)

• Chevy Silverado 2500HD: 2001–2019 — stock height to 2" front lift (GMT800, GMT900, K2XX)
• Chevy Silverado 3500HD: 2001–2019 — stock height to 2" front lift (GMT800, GMT900, K2XX)
• GMC Sierra 2500HD: 2001–2019 — stock height to 2" front lift (GMT800, GMT900, K2XX)
• GMC Sierra 3500HD: 2001–2019 — stock height to 2" front lift (GMT800, GMT900, K2XX)

Does NOT fit: Trucks with more than 2" of front lift — use AXGMEL46 (4–6" kit) or AXGMEL79 (7–9" kit) instead. Does not fit 2020–2026 Silverado/Sierra HD (T1XX platform). Does not fit Silverado/Sierra 1500.

Sway Bar End Link Selection Guide

• Stock height to 2" front lift: Use AXGMEL02 (this listing) — $89.99
• 4–6" front lift: Use AXGMEL46 — $104.99
• 7–9" front lift: Use AXGMEL79 — $109.99

Technical Specifications

• SKU: AXGMEL02
• Type: Sway bar end link kit — stock to mild lift
• Lift Range: 0–2" front lift
• Quantity: Complete kit (both sides)
• Construction: Heavy-duty metal — corrosion-resistant finish
• Weight: 5 lbs
• Application: Stock height and mild-lift GM HD builds — towing, hauling, daily driving

Installation Notes

• Lift height confirmation required: Verify front lift height is 0–2" before ordering. For lifts over 2", use AXGMEL46 (4–6") or AXGMEL79 (7–9") — this kit is not extended enough for higher lift applications.
• Complete kit: This listing includes end links for both sides — left and right. Replace both simultaneously to maintain equal sway bar leverage across the axle.
• Torque specs: Torque end link hardware to OEM specification for GM 2500HD/3500HD sway bar end link mounts (verify in GM service manual or Axiom install sheet). Do not overtorque — end link ball joints require correct preload to function properly.
• Inspection interval: Inspect end link ball joints for play, binding, or wear at regular service intervals. Replace both sides simultaneously if wear is detected on either side.
• Pairing note: If installing alongside a leveling kit (AXGMKEY10, AXGMKEY11, or AXGM10STAGE1), replace end links at the same time to ensure correct sway bar geometry at the new ride height.

Installation Warning

Do not install on trucks with more than 2" of front lift — this kit is not extended enough for mid or high lift applications. Use AXGMEL46 for 4–6" lift or AXGMEL79 for 7–9" lift. Do not install on 2020 or newer GM HD (T1XX). Replace both end links simultaneously — mismatched links will cause unequal sway bar leverage and unpredictable handling. Once installed, the kit is non-returnable.

What is your current front lift height (confirm 0–2"), and are you pairing this with a leveling kit installation — confirm 2001–2019 GMT800/GMT900 or K2XX platform before ordering?