Axiom Supply Lifetime Warranty Wheel Bearing Hub Assembly | 2007-2010 GM 2500HD/3500HD NBS | ABS Sensor Included

Axiom Lifetime Warranty Wheel Bearing Hub Assembly | 2007–2010 Chevy Silverado / GMC Sierra 2500HD & 3500HD | New Body Style (GMT900)

The Axiom Lifetime Warranty Wheel Bearing Hub Assembly (SKU: AX515098) is a complete, sealed wheel bearing and hub assembly for 2007–2010 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD trucks (GMT900 New Body Style platform). A worn or failing wheel bearing causes vibration, humming or grinding noise, ABS fault codes, uneven tire wear, and in severe cases unsafe wheel movement under heavy load or towing. This complete hub assembly replaces the entire bearing and hub unit in a single installation — no bearing press required. Pre-installed ABS sensor for OEM-style plug-and-play connection. Precision-machined bearing surfaces. Corrosion-resistant housing. Sealed maintenance-free design. Backed by Axiom Supply lifetime warranty.

Verified Fitment (OFAS Standard)

• Chevy Silverado 2500HD (Front or Rear): 2007–2010 (GMT900 New Body Style)
• Chevy Silverado 3500HD SRW (Front or Rear): 2007–2010 (GMT900 New Body Style)
• GMC Sierra 2500HD (Front or Rear): 2007–2010 (GMT900 New Body Style)
• GMC Sierra 3500HD SRW (Front or Rear): 2007–2010 (GMT900 New Body Style)

Does NOT fit: 2011 or newer Silverado/Sierra 2500HD/3500HD (K2XX platform — different hub assembly). Does not fit 2006 or earlier Silverado/Sierra HD (GMT800 Classic Body — different hub). Does not fit Silverado/Sierra 1500 (see AX515096). Does not fit Ram 3500 DRW (dual rear wheel) without confirming hub specification. Confirm model year and body style before ordering.

GM HD Wheel Bearing Hub Assembly Series

• 2007–2013 GM 1500 6-Lug (GMT900): AX515096
• 2007–2010 GM 2500HD/3500HD NBS (GMT900): AX515098 (this listing)

Technical Specifications

• SKU: AX515098
• Type: Complete wheel bearing and hub assembly
• ABS Sensor: Pre-installed — OEM-style plug-and-play connector
• Design: Sealed — maintenance-free, no bearing press required
• Housing: Corrosion-resistant
• Warranty: Axiom Supply lifetime warranty
• Weight: 22 lbs
• Application: 2007–2010 GM 2500HD/3500HD — GMT900 New Body Style

Symptoms of a Failing Wheel Bearing

• Humming, grinding, or rumbling noise that changes with vehicle speed
• Noise that increases or decreases when turning left or right (load shift)
• Vibration through the steering wheel or floorboard at highway speed
• ABS warning light or traction control fault codes
• Uneven or accelerated tire wear on the affected corner
• Detectable play or looseness in the wheel when checked by hand at 12 and 6 o’clock

Installation Notes

• Replace in pairs recommended: If one wheel bearing has failed, the opposite side has experienced the same mileage and load cycles. Replacing both sides simultaneously prevents a repeat repair within a short interval.
• ABS connector: Disconnect the ABS sensor connector before removing the old hub assembly. Inspect the connector and wiring harness for damage before installing the new unit. A damaged connector will cause ABS fault codes even with a new sensor.
• Axle nut torque — mandatory: Torque the axle nut to OEM specification for 2007–2010 GM 2500HD/3500HD (verify in GM service manual). Do not estimate — undertorque allows hub movement and accelerated bearing wear; overtorque damages bearing preload.
• Wheel lug torque: Torque wheel lug nuts to OEM specification after installation. Re-torque after the first 50 miles.
• ABS code clearing: After installation, clear any stored ABS or traction control fault codes with a scan tool. Verify ABS system function before returning the vehicle to service.
• Brake inspection: Inspect brake rotors, pads, and caliper hardware while the hub is removed. Address any brake wear before reinstalling the wheel.

Installation Warning

Do not install on 2011 or newer GM HD trucks (K2XX) — hub assembly is incompatible. Do not install on 2006 or earlier Classic Body GM HD (GMT800). Do not install on GM 1500 — see AX515096. Torque axle nut to OEM specification — do not estimate. Clear ABS fault codes after installation and verify system function before driving. Once installed, the assembly is non-returnable.

Have you confirmed your truck is 2007–2010 GMT900 New Body Style (not 2011+ K2XX and not 2006 Classic Body), and are you replacing both sides — confirm front or rear position before ordering?