AMP Research PowerStep | Automatic Electric Running Boards | 2010-2018 Mercedes-Benz Sprinter 2500/3500 | SKU: 76263-01A

Brand: AMP Research | SKU: 76263-01A | Material: Die-Cast Aluminum (Anodized & PTFE Coated) | Application: Automatic Electric Deploy | Engine Compatibility: BlueTEC Diesel & Gas | Free Shipping | Affirm & Afterpay Available

You Upgraded Your Sprinter Van. Now Cargo & Cabin Entry is a Mandatory Climb.

You built your Mercedes-Benz Sprinter 2500 or 3500 into the ultimate high-capability mobile workspace, overland van, or fleet hauler. What you didn't plan for was the exhausting physical toll of climbing in and out of the cab dozens of times a day. Fixed, bulky commercial step bars permanently compromise your ground clearance, look cluttered against your clean graphics, and pose a severe snag risk on tight loading docks and tight trail obstacles.

Worse yet, commodity van steps are fundamentally vulnerable to commercial-tier abuse. In the freezing slush and corrosive liquid salt of the Corrosion Belt, cheap linkages pit and seize completely after a single winter—costing you valuable time on the road. In high-heat arid regions, punishing UV rays turn thin composite steps chalky, warped, and dangerously slick within months. Every time you or your crew step up, you are relying on entry hardware that is actively yielding to the elements.

The AMP Research PowerStep (SKU: 76263-01A) is the permanent commercial-grade fix. Purpose-built exclusively for the 2010–2018 Mercedes-Benz Sprinter NCV3 platform, this system utilizes high-torque, weather-sealed electric motors to drop a wide, high-traction step down instantly when the door swings open. On close, it retracts completely flush against the lower rocker panel—preserving your true ground clearance, cleaning up vehicle aerodynamics, and delivering an effortless step-in height.

The Obsidian Take

We stock the AMP Research PowerStep for the 2010–2018 Sprinter platform because it replaces standard, ugly fleet step blocks with an engineered, low-profile entry solution that functions seamlessly under extreme wear. Most generic e-commerce listings utilize lazy automated text claiming their steps universal-fit everything from sports cars to trucks with options for "Dana 30 or Dana 44 flip kits." That is sloppy, inaccurate data filler. The 76263-01A is an ultra-specific heavy commercial van kit, geometrically mapped to secure directly to the unique factory underbody stampings of the NCV3 chassis.

Instead of thin-walled steel tubes or brittle plastic covers, the steps are built from high-tensile die-cast aluminum coated in a military-grade anodized and PTFE non-stick corrosion shield. Whether your van logs 50,000+ miles a year through harsh northern winter road brine or operates in the blistering desert heat of the Southwest, this finish eliminates oxidation and ensures your non-slip traction surface stays perfectly straight and safe. Complete with integrated OEM-style LED courtesy lights and a plug-and-play pass-through harness, it delivers premium, silent utility that actively elevates your work platform.

⚠️ NCV3 Generation Geometry Only: This kit is mathematically and physically tailored exclusively for the 2010–2018 NCV3 platform. It will NOT fit 2019–2026 Sprinter (VS30 platform) models, as the vehicle's underlying rocker panel stamping profiles and digital gateway modules were completely overhauled for the newer generation.

⚠️ Commercial Body Modification Warning: The 76263-01A is engineered to fit factory steel body panels. If your Sprinter has been modified with aftermarket fiberglass lower body kits, custom wide-track commercial fender flares, or underslung RV grey-water tanks, you must manually verify clearance paths to prevent mechanical binding during the step's downward deployment arc.

⚠️ Badging and Chassis Fact: While designated for Mercedes-Benz, the underlying chassis engineering is shared across generations. This kit is fully compatible with 2010–2018 Freightliner Sprinter 2500/3500 models using identical NCV3 body codes, provided the factory door seals and electronic configurations remain un-modified.

Confirmed Fitment Matrix

CRITICAL FITMENT NOTE: This kit is structurally engineered strictly for standard-track NCV3 platform van chassis for the specified model years.

❌ This Unit Does NOT Fit:

• 2019–2026 Mercedes-Benz Sprinter (VS30 Platform): Next-generation body stamps and internal electronic networks do not align.

• Sprinter Cab Chassis / Cutaway Models: Custom commercial box upfits or flatbed bodies often alter or block the requisite rocker panel mounting areas.

• 2009 or Older Sprinter Models (T1N Platform): Generational chassis changes and older wiring layouts are completely incompatible.

Technical Specifications

Before You Order — 4 Fitment Checkpoints

Commercial van electronic upgrades require absolute validation to eliminate downtime. Review these four checkpoints prior to checkout:

1. Platform Code Validation: Confirm your Sprinter is a true NCV3 platform (built between 2010 and 2018). If your van is a 2019 or newer facelift model, do not buy this kit—the wiring network will not communicate.

2. Body Modifications & Tanks: Look under your passenger-side rocker panel. If your van has custom underslung propane tanks, generator housings, or custom plumbing common to Class B RV builds, ensure there is an unobstructed path for the linkage arms.

3. No Splicing Rule: Review your electrical installation path. Never use cheap T-taps or scotchlocks on the door-trigger circuits, as high-mileage commercial diesel vibrations will cause the connections to back out, resulting in step flickering or failure.

4. Wheelbase Clearance: While designed to work across standard and extended wheelbases, verify that your specific lower body molding lines are clear of custom aftermarket mud flaps that extend into the step area.

Professional Installation & Mechanical Notes

• Harness Before Hardware: Pro Tip: Always route your primary electronic harness and plug into the factory door-trigger ports before lifting and bolting the 51 lb aluminum step assemblies into place. It is substantially simpler to secure the loom lines while the underside of the van is wide open.

• Squaring the Hardware: Cycle the step motors electronically by triggering the door switches prior to applying final torque values to the linkage fasteners. This permits the aluminum components to align naturally under the body and prevents premature motor bind.

• Dry Silicone Maintenance: Because commercial vans accumulate excessive road grime, spray the primary pivot pins periodically with a high-quality dry silicone lubricant. This keeps the high-torque motors moving silently through winter tracking conditions without attracting dust.

AMP RESEARCH POLICY NOTE: Due to the vehicle-specific programming integrated into the plug-and-play electronics box, once the wiring harness has been connected to vehicle power, this system cannot be returned. Verify all configuration metrics prior to unboxing.

Questions We Get Asked

Will this kit work on my 2015 Freightliner-badged Sprinter 3500? Yes. Underneath the badging, the 2010–2018 Mercedes-Benz and Freightliner Sprinters are built on the exact same NCV3 platform. The 76263-01A kit features identical mounting brackets and plug-and-play wiring layout compatibility for both brands.

Does this kit require cutting or splicing into my van's factory electrical system? No. This system features a true plug-and-play wiring network that interfaces cleanly with the vehicle's factory door-trigger circuits, ensuring your commercial vehicle warranty remains fully intact.

Can I install this on a Sprinter Cab Chassis with a custom box bed? This kit requires standard, open factory van rocker panel sections to mount the linkage brackets. If your cab chassis upfit or box body extends down past or modifies the driver and passenger door sills, physical binding will occur.

Are the LED courtesy lights included inside this package? Yes. Low-profile LED courtesy lights are completely integrated into the 76263-01A kit. They mount discreetly to the linkages and illuminate the step surface and ground automatically whenever a door opens for safe loading at night.

Why Buy From Obsidian Forged Auto Supply

• Authorized AMP Research Dealer — Full factory-backed manufacturer warranty protection with factory-direct logistics tracking.

• Free Shipping, Lower 48 — Rapid large-parcel ground delivery directly from our closest regional warehouse.

• Real Fitment Verification — Text (469) 407-7538 (SMS only) with your Sprinter's VIN and model year. An Obsidian technician will manually cross-reference your vehicle's build sheet for a 100% certified fit confirmation before shipping.

• Premium Financing Available — Flexible, secure checkout options through Affirm and Afterpay.

Disclaimer

The technical and product information presented above is compiled from data provided directly by the component manufacturer. Obsidian Forged Auto Supply maintains a rigorous engineering audit workflow to ensure vehicle fitment compatibility; however, we are not responsible or liable for sudden manufacturer-driven specification updates, raw metadata changes, or accuracy discrepancies in the foundational data sheets provided by the manufacturer.

2010–2018 Mercedes-Benz Sprinter NCV3. AMP Research PowerStep System. Eliminate the commercial climb. Add to cart.

Unsure if your Sprinter's aftermarket Class B RV tanks or custom body molding will clear the step deployment path? Text your VIN directly to (469) 407-7538 and an Obsidian technician will verify it.