AMP Research BedStep2™ | Retractable Truck Bed Entry Step | 2021–2026 Ford F-150 (All Cab Styles, Dual Exhaust Compatible) | SKU: 75412-01A

AMP Research BedStep2™ | Retractable Truck Bed Entry Step | 2021–2026 Ford F-150 (All Cab Styles, Dual Exhaust Compatible) | SKU: 75412-01A

THE OBSIDIAN GUARANTEE

✓ 100% Authorized Dealer – Factory-direct AMP Research product. Full 3-year limited warranty included.

✓ Free Shipping – No Minimum – Fast delivery to lower 48. No hidden fees.

✓ Real Fitment Verification – Text before you buy. SMS: (469) 407-7538

✓ Flexible Payment – Affirm & Afterpay available.

Bed Access Without the Climb

Climbing into your F-150's bed shouldn't mean overextending, slipping off the tire, or risking a twisted ankle on the tailgate. The AMP Research BedStep2™ (SKU: 75412-01A) is a retractable, hands-free aluminum step that deploys instantly when you need it and retracts completely out of sight when you don't—preserving your truck's aesthetics and ground clearance while delivering safe, effortless bed entry.

THE PROBLEM YOU'RE SOLVING

You built your 14th Gen F-150 to work hard—hauling cargo, organizing toolboxes, or accessing gear in the bed dozens of times a day. What you didn't plan for was the physical toll. Standard truck beds sit 50+ inches high. Jumping onto the tire wears your knees. Leaping onto the tailgate risks slips and falls. Climbing the bumper feels unstable, especially when carrying tools or equipment.

Cheap aftermarket bed steps are even worse: they're permanent eyesores welded to your bed, they hang down 4–6 inches below your truck's frame (dragging on driveways and trail obstacles), and they're rusted and corroded after one winter in road salt conditions.

The AMP Research BedStep2™ eliminates this problem entirely.

COMPREHENSIVE SPECIFICATIONS

BedStep2™ (75412-01A) Sizing & Deployment Matrix

FEATURES

✓ Eases entry into the bed – Retractable step deploys with a single kick downward

✓ Mounts between cab and rear wheels – Preserves ground clearance and truck aesthetics

✓ Rugged aluminum construction – Lightweight, durable, corrosion-resistant

✓ Stainless steel pivots – Self-lubricating, zero maintenance required

✓ Non-slip step pad – Safe in wet, muddy, or icy conditions

✓ Simple, hands-free operation – Kick to deploy, kick to retract—no manual locking

✓ Handles up to 300 lbs – Built for heavy-duty use, commercial-grade engineering

✓ Driver or passenger side mountable – Choose your preferred mounting side at order

✓ 3-year limited warranty – Factory-backed AMP Research protection

CRITICAL COMPATIBILITY LOCKOUT

⚠️ IMPORTANT FITMENT NOTES:

This unit (75412-01A) IS compatible with:

• ✅ 2021–2026 Ford F-150 (14th Generation ONLY)
• ✅ All cab styles (Regular, SuperCab, SuperCrew)
• ✅ Factory dual exhaust (OEM setup)
• ✅ Standard bed width (5.5', 6.5', 8.0')

This unit does NOT fit:

• ❌ 2009–2014 Ford F-150 (13th Gen) — Different rocker panel geometry; mounting brackets incompatible
• ❌ 2020 and earlier F-150 models — Platform change requires different hardware
• ❌ Custom/Aftermarket Single Exhaust Systems — May interfere with step deployment arc on driver's side; verify before purchase
• ❌ Full-Width Fender Flares (Bushwacker/Lund style) — Can block step's mounting surface; custom fitment required
• ❌ Lifted F-150s (4"+ suspension lift) — Bed height changes mounting position; brackets may not align

FRICTION ELIMINATION: TOP 3 BUYER ANXIETIES

"Will this interfere with my truck's frame or brake lines?"

Direct Answer: No. The BedStep2™ (75412-01A) mounts to the rocker panel (where the door attaches), not to the bed or undercarriage. It uses factory-engineered bracket points that don't conflict with brake lines, fuel lines, or frame components.

"What tools and skills do I need to install this?"

Installation Difficulty: Beginner-friendly DIY (approximately 2–3 hours).

Required Tools:

• Socket set (¼", 3/8" drive)
• Torque wrench (10–25 ft-lbs range)
• Drill with bits (if factory holes require clearing)
• Jack and jack stands (for safe truck lifting)

Installation Process:

1. Lift truck on jack stands (front corner, driver-side or passenger-side as needed)
2. Locate mounting bracket holes on rocker panel (factory pre-drilled on 2021–2026 F-150)
3. Install aluminum brackets using supplied hardware
4. Attach step assembly with self-lubricating pivot pins
5. Test deployment/retraction by hand (should move smoothly, no binding)
6. Torque all fasteners to specification (provided in manual)

Comprehensive installation instructions and hardware provided in package.

"How long will this last? Will it rust or break?"

Durability Guarantee:

The BedStep2™ (75412-01A) is built to outlast your truck's warranty. Here's why:

• Aluminum construction – Immune to road salt corrosion (won't rust like steel steps)
• Stainless steel pivots – Zero corrosion, zero seizing, even in harsh winters
• Textured powder coat finish – UV-resistant, won't chalk or fade in sunlight
• Self-lubricating joints – No maintenance, no gumming up, no oil/grease needed
• 300 lb capacity – Handles daily abuse, heavy tools, multiple users
• Commercial-grade engineering – Trusted by fleet operators, contractors, and off-road builders

3-Year Limited Warranty: Covers all defects in materials and workmanship. If anything fails under normal use, AMP Research will repair or replace it at no charge (labor costs on you). After 3 years, you own it—and it'll still work.

DETAILED DESCRIPTION

Whether you're an avid angler, camper, or regularly work out of your truck, you're likely climbing in and out of the bed frequently. Not only is this tiring day after day, but you're also susceptible to injury from slipping, overextending, or pulling a muscle. Instead of climbing your pickup's tire or leaping onto the tailgate, consider fitting your truck with the AMP Research BedStep2™ (SKU: 75412-01A)!

This heavy-duty step utilizes vehicle-specific brackets and hardware to mount between the cab and rear tire, providing access to the bed to dig through your toolbox or load and unload cargo. With the BedStep2™, you can easily climb onto the step's non-slip tread surface and swing a leg over the bedside, ensuring safe entry into the bed with minimal effort!

The BedStep2™ is constructed from high-grade aluminum for superior strength and durability; all pivots feature corrosion-resistant stainless steel construction for maximum longevity. Altogether, the BedStep2™ can handle loads up to 300 lbs! All joints are self-lubricating for added convenience, requiring zero maintenance.

As a bonus, the AMP Research BedStep2™ features an innovative retractable design. Whenever you require bed access, kick the step downwards to deploy it. When finished, give the step another nudge upwards and watch it retract beneath your pickup's bed.

AMP Research is a RealTruck® company, so when you order the BedStep2™ from Obsidian Forged Auto Supply, you're ordering directly from the manufacturer. We expect to provide you with the best experience and proudly back this product with a limited 3-year warranty.

INSTALLATION & MECHANICAL NOTES

Before You Order — 4 Fitment Checkpoints

1. Confirm Your F-150 Generation: Is your truck a 2021 or newer? (Check your door jam or VIN decoder). If it's 2020 or earlier, the 75412-01A won't fit—you need a different part number.
2. Dual Exhaust Configuration: Do you have factory dual exhaust (standard on most 14th Gen F-150s)? If you've upgraded to a custom single-exhaust system, text (469) 407-7538 to verify rocker panel clearance on your mounting side.
3. Truck Lift Status: If your F-150 has been lifted 4" or more, suspension geometry changes may affect bracket alignment. Text (469) 407-7538 to verify before purchase.
4. Jack Setup: You'll need a proper jack and jack stands to lift your truck safely. Never work under a truck supported only by a jack.

WARRANTY DETAILS

3-Year Limited Warranty (AMP Research)

What is Covered: All defects in materials or workmanship on the AMP Research BedStep2™ (SKU: 75412-01A) properly installed per provided instructions.

For How Long: This warranty, and any implied warranties including merchantability and fitness for a particular purpose, lasts three years from the date of purchase. The warranty expires if the product is removed from the original vehicle or if the original vehicle is transferred to another owner. The warranty is not transferable from the original purchaser.

What These Warranties Will NOT Cover: These warranties do not cover any damage, defect, or malfunction caused by misuse, abuse, accident, improper installation, modification, improper or inadequate maintenance, or on-road and off-road hazards. Incidental and consequential damages are not recoverable under this warranty. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not apply to you.

What AMP Research Will Do: During the applicable warranty period listed above, AMP Research will, at its option, either repair or replace any defective product at no additional charge. You must pay any labor charges associated with removing or reinstalling the product. If a specific product has been discontinued, AMP Research may, at its option, replace your product with a current product of comparable function and value.

QUESTIONS WE GET ASKED

Q: Does this step require drilling into my truck's bed? A: No. The step mounts to the rocker panel (door frame area) using factory-provided or pre-drilled holes on 2021–2026 F-150s. Your truck bed is untouched.

Q: What's the difficulty level for installation? A: Beginner-friendly DIY. Most truck owners complete installation in 2–3 hours with basic tools (socket set, torque wrench, jack, and jack stands). Full instructions and hardware provided in package.

Q: Is the BedStep2™ permanent, or can I remove it later? A: Fully removable. If you sell your truck or no longer need it, the step unbolts in 30 minutes. No permanent damage to your F-150.

Q: What if I need passenger-side mounting instead of driver-side? A: Choose your mounting side at checkout. Both sides have identical fitment and operation.

Q: Does my 2020 F-150 fit this step? A: No. The 75412-01A is engineered exclusively for 2021–2026 F-150s (14th Generation). 2020 and earlier models require a different bracket design. Contact us for alternative options.

Q: How does the retractable mechanism work? A: The BedStep2™ uses self-lubricating stainless steel pivot pins. Kick the step DOWN to deploy it fully. When you're done, kick it UP and it retracts flush against the truck bed. No springs, no locks, no mechanisms—just smooth, hands-free operation.

Q: Will the step work in extreme cold or heat? A: Yes. The BedStep2™ operates reliably from –20°F to 150°F. The aluminum and stainless steel won't contract or expand enough to affect operation.

WHY BUY FROM OBSIDIAN FORGED AUTO SUPPLY

• Authorized AMP Research Dealer – Factory-backed warranty, direct logistics from manufacturer
• Free Shipping, Lower 48 – Rapid delivery to your door, no minimum purchase
• Real Fitment Verification – Text your F-150's year, cab style, and exhaust setup to (469) 407-7538. We confirm 100% compatibility before you buy
• Premium Financing – Affirm & Afterpay available for qualified purchases
• Expert Support – Call or text (469) 407-7538 for pre-purchase questions

THE OBSIDIAN TAKE

The AMP Research BedStep2™ (SKU: 75412-01A) is not a luxury upgrade—it's a safety investment for any 14th Gen F-150 owner who regularly accesses their bed.

Who This Is For:

• Truck owners who load/unload cargo daily (contractors, landscapers, tradies)
• Anglers, campers, and outdoor enthusiasts who organize gear frequently
• Anyone over 40 who's tired of the physical toll of climbing into the bed
• Fleet managers who want safer, faster bed access for crews
• Off-road builders who value clean aesthetics and functional engineering
• Anyone who parks on sloped driveways or uneven terrain (safety critical)

Who This Is NOT For:

• Owners of 2020 or earlier F-150s (different platform, 75412-01A won't fit)
• Owners who never access their bed (unnecessary upgrade)
• Budget-conscious buyers looking for a $50 step (this is engineering-grade, not cheap)

The Trade-Off: You're paying for precision engineering, commercial-grade corrosion resistance, and durability that lasts 10+ years. Cheap bolt-on steps ($80–$150) rust out in 2 winters and hang down dangerously low. The BedStep2™ costs more upfront but eliminates the hassle, safety risk, and replacement cycle entirely.

Bottom Line: If you work out of your truck or access your bed regularly, the BedStep2™ will pay for itself in saved time, reduced injury risk, and the aesthetic upgrade to your F-150. It's the most underrated upgrade you can make to a modern truck.

DISCLAIMER

Product specifications and fitment information compiled from AMP Research manufacturer data and tested on 2021–2026 Ford F-150 platforms. Obsidian Forged Auto Supply maintains rigorous fitment verification; however, we recommend confirming fitment with your VIN or truck configuration before final purchase. Text (469) 407-7538 for fitment verification.

Not sure if the BedStep2™ (75412-01A) fits your specific F-150? Text your truck's year, cab style, and exhaust setup to (469) 407-7538. An Obsidian specialist will confirm fitment before you buy.