AMP Research BedStep2 for 2014-2018 Ram 2500/3500 SRW DS

✅ OFAS VERIFIED FITMENT: 2014–2018 Ram 2500 SRW | 2014–2018 Ram 3500 SRW | DS Platform | Side-Mounted | Foot-Activated | 300 lb Load Rated
📍 Regional Best-Sellers: Engineered for Arid and Salt-Corridor environments.

Why Obsidian Recommended This for Your Region

Optimized for Arid Conditions: Arid climate Ram HD owners — running ranch operations, construction sites, and oil field service across the Southwest — need side bed access that works every time without adjustment or maintenance. We carry the BedStep2 because its high-strength aluminum construction and corrosion-resistant finish are engineered to stay dimensionally stable in Arid heat cycles, keeping your 300 lb load rating intact and your foot-activated mechanism deploying clean through a Southwest summer of daily HD utility use.

Built for the Salt-Corridor: Salt-Corridor Ram HD owners — running the stretch from Chicago through Detroit, Cleveland, and into the Northeast — deal with road brine and liquid de-icer applied from October through April. We’ve vetted the corrosion-resistant hardware and reinforced hinge system on this unit specifically because Salt-Corridor winters don’t give cheap pivot hardware a second season on a work truck logging 60,000 miles a year. Your hinge stays sealed, your step pad stays grippy, and your BedStep2 deploys in March the same way it did in August.

Is This for You? (Before You Buy)

Confirm these 3 “Truths” to ensure a 100% fit:

• [ ] Year & Platform: Do you have a 2014–2018 Ram 2500 or 3500 on the DS platform? (The 2019–2026 Ram HD uses a revised bedside profile — it requires a separate BedStep2 unit).
• [ ] Wheel Config: Confirm your Ram 3500 is SRW (Single Rear Wheel) — Ram 3500 DRW (Dually) has a wider rear bedside that is not compatible with this mounting configuration.
• [ ] Bedside Clearance: Are you running stock fender flares and bedside panels? Aftermarket fender flares, bedside armor, and fuel tank skid plates require clearance verification before ordering — measure twice.

The Driver Experience (The Obsidian Take)

Most DS Ram HD side bed access solutions are a wheel well step that puts you in the wrong position or a ladder that takes 30 seconds to deploy. We chose the 75411-01A because AMP Research’s side-mounted BedStep2 deploys with a single foot tap just ahead of the rear wheel, holds 300 lbs without flex, and puts you exactly where you need to be to reach toolboxes, cargo, and gear without climbing into the bed. The reinforced hinge system and all-weather non-slip traction pad mean zero maintenance — no grease schedule, no seized pivot after a Salt-Corridor winter, no step that stops working when you need it most on a job site. Expect a Ram HD that works as hard as the operation running it.

Obsidian DIY Notes

• Pro Tip: Measure twice before drilling — aftermarket fender flares, bedside armor, and fuel tank skid plates can interfere with the side mount on this unit. Confirm your bedside clearance before ordering and verify no interference with the step travel path.
• What Else You’ll Need: Confirm your Ram HD is the 2014–2018 DS platform SRW before ordering. If you’re running aftermarket bedside modifications, contact our team to verify mounting clearance before we ship.

Technical Specifications

2014–2018 Ram 2500/3500 SRW BedStep2 Specs

• SKU: 75411-01A
• Platform: Ram 2500/3500 DS (2014–2018) SRW only — not compatible with DRW or 2019+ Ram HD
• Load Rating: 300 lbs
• Mount Type: Side-mounted — ahead of rear wheel, driver or passenger side
• Activation: Foot-activated deploy / retract — no hands required
• Construction: High-strength aluminum with reinforced hinge system
• Step Surface: Non-slip all-weather textured step pad
• Storage: Stows flush — maintains ground clearance when not in use
• Finish: Corrosion-resistant hardware and finish
• Weight: 10 lbs
• Shipping: Ships via Ground (Standard Parcel) depending on regional warehouse availability.

Ram 2500/3500 DS BedStep2 Installation & Technical Notes

• Difficulty: Moderate DIY / Professional Recommended for optimal bracket alignment
• Platform Note: DS platform SRW only — DRW and 2019+ Ram HD require separate units
• Clearance Note: Aftermarket fender flares, bedside armor, and fuel tank skid plates require clearance verification before installation
• Post-Install: No alignment or suspension recalibration required
• Policy Note: Once installed, the unit is non-returnable per AMP Research policy

Verified Fitment (OFAS Standard)

✅ CONFIRMED FITMENT:

• 2014–2018 Ram 2500 — DS Platform | SRW
• 2014–2018 Ram 3500 — DS Platform | SRW

❌ FITMENT REQUIREMENTS:

• Ram 3500 DRW (Dually, 2014–2018): Wider rear bedside — not compatible with this mounting configuration. Contact our team for the correct part number.
• 2019–2026 Ram 2500/3500 (New Body): Revised bedside profile — requires a new body-specific BedStep2 unit. Contact our team for the correct part number.
• 2013 and Earlier Ram HD: Requires a generation-specific BedStep2 unit. Contact our team for the correct part number for your build.

Final Fitment Check

Don’t guess on your bed access setup. Text your VIN to (469) 407-7538 for a 100% Yes/No confirmation from an Obsidian Tech before we ship.