AMP Research BedStep2 for 2019-2026 Ram 2500/3500 SRW

✅ OFAS VERIFIED FITMENT: 2019–2026 Ram 2500 SRW | 2019–2026 Ram 3500 SRW | Side-Mounted | Foot-Activated | 300 lb Load Rated
📍 Regional Best-Sellers: Engineered for High-Mercury and Frozen-Tundra environments.

Why Obsidian Recommended This for Your Region

Optimized for High-Mercury Conditions: High-Mercury Ram HD owners — running job sites in the Southwest, the Gulf Coast, and the Deep South — deal with sustained ambient temps that push cheap step hardware past its rated threshold fast. We carry the BedStep2 because its high-strength aluminum construction and corrosion-resistant finish are engineered to stay dimensionally stable in High-Mercury conditions where the cab thermometer reads 115°F and the rear bedside is radiating another 30 on top of that. Your 300 lb load rating stays intact. Your foot-activated mechanism deploys clean. Every time.

Built for Frozen-Tundra Duty: Frozen-Tundra Ram HD owners — running Minnesota winters, the Dakotas, and the Upper Peninsula — deal with sub-zero temperatures and ice-loaded step surfaces that seize cheap pivot hardware fast. We’ve vetted the reinforced hinge system and corrosion-resistant hardware on this unit specifically because Frozen-Tundra conditions demand a step that deploys at -20°F the same way it does in July — no seized pivots, no cracked step pad, no excuses on a work truck that starts before sunrise.

Is This for You? (Before You Buy)

Confirm these 3 “Truths” to ensure a 100% fit:

• [ ] Year: Do you have a 2019–2026 Ram 2500 or 3500? (2018 and earlier Ram HD uses a different bedside profile — it requires a separate BedStep2 unit).
• [ ] Wheel Config: Confirm your Ram 3500 is SRW (Single Rear Wheel) — Ram 3500 DRW (Dually) has a wider rear bedside that is not compatible with this mounting configuration.
• [ ] Bedside Clearance: Are you running stock fender flares and bedside panels? Aftermarket fender flares, bedside armor, and fuel tank skid plates require clearance verification before ordering — measure twice.

The Driver Experience (The Obsidian Take)

Most 2019+ Ram HD side bed access solutions are a wheel well step that puts you in the wrong position or a ladder that takes 30 seconds to deploy on a truck that’s hauling 20,000 lbs and needs to keep moving. We chose the 75417-01A because AMP Research’s side-mounted BedStep2 deploys with a single foot tap just ahead of the rear wheel, holds 300 lbs without flex, and stows flush to maintain ground clearance when not in use. The reinforced hinge system and all-weather non-slip traction pad mean zero maintenance — no grease schedule, no seized pivot after a Frozen-Tundra winter, no step that stops working when you need it most on a job site. Expect a Ram HD that works as hard as the operation running it.

Obsidian DIY Notes

• Pro Tip: Measure twice before drilling — aftermarket fender flares, bedside armor, and fuel tank skid plates can interfere with the side mount on this unit. Confirm your bedside clearance before ordering and verify no interference with the step travel path.
• What Else You’ll Need: Confirm your Ram HD is 2019–2026 SRW before ordering. If you’re running aftermarket bedside modifications, contact our team to verify mounting clearance before we ship.

Technical Specifications

2019–2026 Ram 2500/3500 SRW BedStep2 Specs

• SKU: 75417-01A
• Platform: Ram 2500/3500 SRW (2019–2026) — not compatible with DRW or 2018 and earlier Ram HD
• Load Rating: 300 lbs
• Mount Type: Side-mounted — ahead of rear wheel, driver or passenger side
• Activation: Foot-activated deploy / retract — no hands required
• Construction: High-strength aluminum with reinforced hinge system
• Step Surface: Non-slip all-weather textured step pad
• Storage: Stows flush — maintains ground clearance when not in use
• Finish: Corrosion-resistant hardware and finish
• Weight: 14 lbs
• Shipping: Ships via Ground (Standard Parcel) depending on regional warehouse availability.

Ram 2500/3500 SRW BedStep2 Installation & Technical Notes

• Difficulty: Moderate DIY / Professional Recommended for optimal bracket alignment
• Config Note: SRW only — Ram 3500 DRW requires a separate unit
• Year Note: 2019–2026 only — 2018 and earlier Ram HD requires a generation-specific unit
• Clearance Note: Aftermarket fender flares, bedside armor, and fuel tank skid plates require clearance verification before installation
• Post-Install: No alignment or suspension recalibration required
• Policy Note: Once installed, the unit is non-returnable per AMP Research policy

Verified Fitment (OFAS Standard)

✅ CONFIRMED FITMENT:

• 2019–2026 Ram 2500 — SRW
• 2019–2026 Ram 3500 — SRW

❌ FITMENT REQUIREMENTS:

• Ram 3500 DRW (Dually, 2019–2026): Wider rear bedside — not compatible with this mounting configuration. Contact our team for the correct DRW-specific part number.
• 2018 and Earlier Ram 2500/3500: Different bedside profile — requires a generation-specific BedStep2 unit. Contact our team for the correct part number.

Final Fitment Check

Don’t guess on your bed access setup. Text your VIN to (469) 407-7538 for a 100% Yes/No confirmation from an Obsidian Tech before we ship.