AMP Research BedStep2 for 2023-2026 Ford F-250/F-350/F-450 Super Duty P702

✅ OFAS VERIFIED FITMENT: 2023–2026 Ford F-250/F-350/F-450 Super Duty | P702 Platform | Side-Mounted | Foot-Activated | 300 lb Load Rated
📍 Regional Best-Sellers: Engineered for Low-Desert and Pacific Northwest environments.

Why Obsidian Recommended This for Your Region

Optimized for Low-Desert Conditions: Low-Desert Super Duty owners — running the Phoenix basin, the Imperial Valley, and the Sonoran corridor — deal with ground temps that exceed 150°F in July and UV exposure that destroys cheap step hardware within a single season. We carry the BedStep2 because its high-strength aluminum construction and corrosion-resistant finish are engineered to stay dimensionally stable in sustained Low-Desert heat cycles, keeping your 300 lb load rating intact and your foot-activated mechanism deploying clean through a Southwest summer of daily HD utility use.

Built for the Pacific Northwest: Pacific Northwest Super Duty owners — running Washington, Oregon, and Northern California job sites — deal with year-round rain, road film, and coastal moisture that infiltrate cheap pivot hardware and turn step pads into slip hazards within a season. We’ve vetted the corrosion-resistant hardware and reinforced hinge system on this unit specifically because Pacific Northwest conditions demand a step that stays grippy on a wet pad, resists moisture at the pivot, and deploys clean after sitting in a wet garage all week.

Is This for You? (Before You Buy)

Confirm these 3 “Truths” to ensure a 100% fit:

• [ ] Year: Do you have a 2023–2026 Ford Super Duty (P702 platform)? (The 2020–2022 Super Duty is the P558 platform with different bedside geometry — it requires a separate BedStep2 unit).
• [ ] Config: Confirm your Super Duty is F-250, F-350 SRW, or F-450. F-450 chassis cab buyers must confirm bedside panel clearance before ordering.
• [ ] Bedside Clearance: Are you running stock fender flares and bedside panels? Aftermarket fender flares, bedside armor, and fuel tank skid plates require clearance verification before ordering — measure twice.

The Driver Experience (The Obsidian Take)

Most P702 Super Duty bed access solutions are a wheel well step that puts you in the wrong position or a ladder that takes 30 seconds to deploy on a truck that’s hauling 20,000 lbs and needs to keep moving. We chose the 75423-01A because AMP Research’s side-mounted BedStep2 deploys with a single foot tap just ahead of the rear wheel, holds 300 lbs without flex, and stows flush to maintain ground clearance when not in use. The reinforced hinge system and all-weather non-slip traction pad mean zero maintenance — no grease schedule, no seized pivot after a Pacific Northwest winter, no step that stops working when you need it most on a job site. Expect a P702 Super Duty that works as hard as the operation running it.

Obsidian DIY Notes

• Pro Tip: Measure twice before drilling — aftermarket fender flares, bedside armor, and fuel tank skid plates can interfere with the side mount on this unit. F-450 chassis cab buyers: confirm bedside panel clearance before ordering.
• What Else You’ll Need: Confirm your Super Duty is the 2023–2026 P702 platform — not the 2022 or earlier P558 — before ordering. If you’re running aftermarket bedside modifications, contact our team to verify mounting clearance before we ship.

Technical Specifications

2023–2026 Ford Super Duty P702 BedStep2 Specs

• SKU: 75423-01A
• Platform: Ford Super Duty P702 (2023–2026) — not compatible with P558 (2022 and earlier)
• Load Rating: 300 lbs
• Mount Type: Side-mounted — ahead of rear wheel, driver or passenger side
• Activation: Foot-activated deploy / retract — no hands required
• Construction: High-strength aluminum with reinforced hinge system
• Step Surface: Non-slip all-weather textured step pad
• Storage: Stows flush — maintains ground clearance when not in use
• Finish: Corrosion-resistant hardware and finish
• Weight: 14 lbs
• Shipping: Ships via Ground (Standard Parcel) depending on regional warehouse availability.

Super Duty P702 BedStep2 Installation & Technical Notes

• Difficulty: Moderate DIY / Professional Recommended for optimal bracket alignment
• Year Note: 2023–2026 P702 only — 2022 and earlier Super Duty (P558) requires a separate BedStep2 unit
• F-450 Note: Chassis cab configurations require bedside panel clearance confirmation before installation
• Clearance Note: Aftermarket fender flares, bedside armor, and fuel tank skid plates require clearance verification before installation
• Post-Install: No alignment or suspension recalibration required
• Policy Note: Once installed, the unit is non-returnable per AMP Research policy

Verified Fitment (OFAS Standard)

✅ CONFIRMED FITMENT:

• 2023–2026 Ford F-250 Super Duty — P702 Platform
• 2023–2026 Ford F-350 Super Duty SRW — P702 Platform
• 2023–2026 Ford F-450 Super Duty — Verify chassis cab bedside clearance

❌ FITMENT REQUIREMENTS:

• 2020–2022 Ford Super Duty (P558 Platform): Different bedside geometry — requires a P558-specific BedStep2 unit. Contact our team for the correct part number.
• 2019 and Earlier Super Duty: Requires a generation-specific BedStep2 unit. Contact our team for the correct part number for your build.

Final Fitment Check

Don’t guess on your bed access setup. Text your VIN to (469) 407-7538 for a 100% Yes/No confirmation from an Obsidian Tech before we ship.