AMP Research BedStep for 2019-2026 Ram 1500 New Body DT Excludes TRX

✅ OFAS VERIFIED FITMENT: 2019–2026 Ram 1500 New Body (DT Platform) | All Bed Lengths | 2WD & 4WD | Excludes TRX | Frame-Mounted | Foot-Activated | 300 lb Load Rated
📍 Regional Best-Sellers: Engineered for Tropical and Frozen-Tundra environments.

Why Obsidian Recommended This for Your Region

Optimized for Tropical Conditions: Tropical climate Ram 1500 owners — running South Florida, the Gulf Coast, and Hawaii — deal with year-round humidity, salt air, and UV exposure that destroys cheap step hardware within a single season. We carry the BedStep because its high-strength aluminum construction and corrosion-resistant finish are engineered to resist Tropical moisture infiltration, keeping your 300 lb load rating intact and your foot-activated mechanism deploying clean through 365 days of heat and humidity at the boat ramp or the job site.

Built for Frozen-Tundra Duty: Frozen-Tundra Ram 1500 owners — running Minnesota winters, the Dakotas, and the Upper Peninsula — deal with sub-zero temperatures and ice-loaded step surfaces that seize cheap pivot hardware fast. We’ve vetted the reinforced hinge system and corrosion-resistant hardware on this unit specifically because Frozen-Tundra conditions demand a step that deploys at -20°F the same way it does in July — no seized pivots, no cracked step pad, no excuses.

Is This for You? (Before You Buy)

Confirm these 3 “Truths” to ensure a 100% fit:

• [ ] Platform: Do you have the Ram 1500 New Body (DT platform)? The Ram 1500 Classic (DS platform) was sold alongside the DT from 2019–2024 — both look similar but use different rear frame geometry. Installing this unit on a Classic (DS) will result in rear frame mounting incompatibility.
• [ ] Model: Confirm your Ram 1500 is not a TRX — TRX models use different rear frame and exhaust routing and are not compatible with this unit.
• [ ] Rear Clearance: Are you running a stock rear bumper? Aftermarket rear bumpers, rear armor, and tow sensor brackets require clearance verification before ordering — measure twice.

The Driver Experience (The Obsidian Take)

Most Ram 1500 bed access solutions are a tire step that shifts every time you use it or a tailgate you have to climb over with a load in your hands. We chose the 75322-01A because AMP Research’s frame-mounted BedStep deploys with a single foot tap, holds 300 lbs without flex, and stows flush to maintain ground clearance when not in use. The reinforced hinge system and all-weather non-slip traction pad mean zero maintenance — no grease schedule, no seized pivot after a Frozen-Tundra winter, no step that stops working when you need it most. Expect a DT Ram 1500 that works as hard as the owner running it.

Obsidian DIY Notes

• Pro Tip: Measure twice before drilling — aftermarket liners, bed-extenders, and tow package brackets can interfere with the frame mount on this unit. Check your rear frame clearance before ordering and confirm no interference with the step travel path.
• What Else You’ll Need: Confirm your Ram 1500 is the New Body DT platform — not the Classic DS or TRX — before ordering. If you’re unsure which platform you have, text your VIN to our team and we’ll confirm before we ship.

Technical Specifications

2019–2026 Ram 1500 DT BedStep Specs

• SKU: 75322-01A
• Platform: Ram 1500 New Body (DT) only — not compatible with Ram 1500 Classic (DS) or TRX
• Load Rating: 300 lbs
• Mount Type: Frame-mounted — driver or passenger side
• Activation: Foot-activated deploy / retract — no hands required
• Construction: High-strength aluminum with reinforced hinge system
• Step Surface: Non-slip all-weather textured step pad
• Compatibility: All bed lengths | 2WD & 4WD
• Storage: Stows flush — maintains ground clearance when not in use
• Finish: Corrosion-resistant hardware and finish
• Weight: 11 lbs
• Shipping: Ships via Ground (Standard Parcel) depending on regional warehouse availability.

Ram 1500 DT BedStep Installation & Technical Notes

• Difficulty: Moderate DIY / Professional Recommended for optimal bracket alignment
• Platform Note: DT platform only — Ram 1500 Classic (DS) and TRX are not compatible
• Clearance Note: Aftermarket rear bumpers, rear armor, and tow sensor brackets require clearance verification before installation
• Post-Install: No alignment or suspension recalibration required
• Policy Note: Once installed, the unit is non-returnable per AMP Research policy

Verified Fitment (OFAS Standard)

✅ CONFIRMED FITMENT:

• 2019–2026 Ram 1500 New Body — DT Platform | All Bed Lengths | 2WD & 4WD

❌ FITMENT REQUIREMENTS:

• Ram 1500 Classic (DS Platform, 2019–2024): Different rear frame geometry — requires a DS-specific BedStep unit. Contact our team for the correct part number.
• Ram 1500 TRX: Different rear frame and exhaust routing — requires a TRX-specific unit. Contact our team for the correct part number.
• 2018 and Earlier Ram 1500: Requires a generation-specific BedStep unit. Contact our team for the correct part number for your build.

Final Fitment Check

Don’t guess on your bed access setup. Text your VIN to (469) 407-7538 for a 100% Yes/No confirmation from an Obsidian Tech before we ship.