AMP Research BedStep for 2009-2024 Ram 1500 and Classic DS Dual Exhaust

✅ OFAS VERIFIED FITMENT: 2009–2018 Ram 1500 (DS Platform) | 2019–2024 Ram 1500 Classic (DS Platform) | Dual Exhaust Configuration Only | Frame-Mounted | Foot-Activated | 300 lb Load Rated
📍 Regional Best-Sellers: Engineered for High-Plains and Alpine environments.

Why Obsidian Recommended This for Your Region

Optimized for High-Plains Utility: High-Plains Ram 1500 owners — running ag operations, ranch work, and oil field service across Kansas, Oklahoma, and the Texas Panhandle — need bed access that works every time, in every condition, without a second thought. We carry the BedStep because its foot-activated deploy mechanism and 300 lb load rating are engineered for the kind of daily utility cycles that High-Plains work trucks log — where you’re in and out of the bed 30 times a day and the step has to perform every single time without adjustment or maintenance.

Built for Alpine Conditions: Alpine Ram 1500 owners — running Colorado ranches, Rocky Mountain job sites, and Sierra Nevada work routes — deal with UV exposure, freeze-thaw cycles, and temperature swings that destroy cheap step hardware fast. We’ve vetted the reinforced hinge system and corrosion-resistant hardware on this unit specifically because Alpine conditions demand a step that deploys reliably when the temperature drops 50 degrees overnight and ice has been sitting on the step pad since 3 AM.

Is This for You? (Before You Buy)

Confirm these 3 “Truths” to ensure a 100% fit:

• [ ] Platform: Do you have a 2009–2018 Ram 1500 or a 2019–2024 Ram 1500 Classic — both on the DS platform? (The 2019–2026 Ram 1500 New Body uses the DT platform with different rear frame geometry — it requires a separate BedStep unit).
• [ ] Exhaust: Confirm your Ram 1500 DS has a dual exhaust configuration. Single-exhaust DS models require a separate BedStep SKU — installing this unit on a single-exhaust model will result in exhaust clearance conflict.
• [ ] Rear Clearance: Are you running a stock rear bumper? Aftermarket rear bumpers, rear armor, and tow sensor brackets require clearance verification before ordering — measure twice.

The Driver Experience (The Obsidian Take)

Most DS Ram 1500 bed access solutions are a tire step that shifts every time you use it or a tailgate you have to climb over with a load in your hands. We chose the 75325-01A because AMP Research’s frame-mounted BedStep deploys with a single foot tap, holds 300 lbs without flex, and stows flush to maintain ground clearance when not in use. The dual-exhaust-compatible routing means no clearance conflicts, no heat damage to the step mechanism, and no compromises on a DS platform that was built to work. Expect a Ram 1500 that steps up to the job every time.

Obsidian DIY Notes

• Pro Tip: Measure twice before drilling — aftermarket liners, bed-extenders, and tow package brackets can interfere with the frame mount on this unit. Confirm your exhaust configuration is dual before ordering — single-exhaust DS models require a different SKU.
• What Else You’ll Need: Confirm your Ram 1500 is the DS platform (2009–2018 Ram 1500 or 2019–2024 Classic) with dual exhaust before ordering. If you’re unsure of your exhaust configuration or platform, text your VIN to our team and we’ll confirm before we ship.

Technical Specifications

2009–2024 Ram 1500 DS BedStep Specs

• SKU: 75325-01A
• Platform: Ram 1500 DS (2009–2018) & Ram 1500 Classic DS (2019–2024) — Dual Exhaust Only
• Load Rating: 300 lbs
• Mount Type: Frame-mounted — driver or passenger side
• Activation: Foot-activated deploy / retract — no hands required
• Exhaust Routing: Dual-exhaust compatible — not compatible with single-exhaust DS models
• Construction: High-strength aluminum with reinforced hinge system
• Step Surface: Non-slip all-weather textured step pad
• Storage: Stows flush — maintains ground clearance when not in use
• Finish: Corrosion-resistant hardware and finish
• Weight: 11 lbs
• Shipping: Ships via Ground (Standard Parcel) depending on regional warehouse availability.

Ram 1500 DS BedStep Installation & Technical Notes

• Difficulty: Moderate DIY / Professional Recommended for optimal bracket alignment
• Exhaust Note: Dual exhaust DS platform only — single-exhaust models require a separate SKU
• Platform Note: DS platform only — 2019–2026 Ram 1500 New Body (DT) is not compatible
• Clearance Note: Aftermarket rear bumpers, rear armor, and tow sensor brackets require clearance verification before installation
• Post-Install: No alignment or suspension recalibration required
• Policy Note: Once installed, the unit is non-returnable per AMP Research policy

Verified Fitment (OFAS Standard)

✅ CONFIRMED FITMENT:

• 2009–2018 Ram 1500 — DS Platform | Dual Exhaust
• 2019–2024 Ram 1500 Classic — DS Platform | Dual Exhaust

❌ FITMENT REQUIREMENTS:

• Ram 1500 DS Single Exhaust (2009–2018) & Classic DS Single Exhaust (2019–2024): Requires a single-exhaust-specific BedStep SKU. Contact our team for the correct part number.
• 2019–2026 Ram 1500 New Body (DT Platform): Different rear frame geometry — requires a DT-specific BedStep unit. Contact our team for the correct part number.
• 2008 and Earlier Ram 1500: Requires a generation-specific BedStep unit. Contact our team for the correct part number for your build.

Final Fitment Check

Don’t guess on your bed access setup. Text your VIN to (469) 407-7538 for a 100% Yes/No confirmation from an Obsidian Tech before we ship.