AMP Research BedStep for 1999-2016 Ford F-250/F-350/F-450 Super Duty

✅ OFAS VERIFIED FITMENT: 1999–2016 Ford F-250/F-350/F-450 Super Duty | Frame-Mounted | Foot-Activated | 300 lb Load Rated
📍 Regional Best-Sellers: Engineered for High-Plains and High-Altitude environments.

Why Obsidian Recommended This for Your Region

Optimized for High-Plains Utility: High-Plains Super Duty owners — running ag operations, oil field service, and ranch work across Kansas, Oklahoma, and the Texas Panhandle — need bed access that works every time, in every condition, without a second thought. We carry the BedStep because its foot-activated deploy mechanism and 300 lb load rating are engineered for the kind of daily utility cycles that High-Plains work trucks log — where you’re in and out of the bed 30 times a day and the step has to perform every single time without adjustment or maintenance.

Built for High-Altitude Conditions: High-Altitude Super Duty owners — running Colorado ranches, Rocky Mountain job sites, and Sierra Nevada work routes — deal with UV exposure, freeze-thaw cycles, and temperature swings that destroy cheap step hardware fast. We’ve vetted the high-strength aluminum alloy construction and stainless-steel pivot pins on this unit specifically because High-Altitude conditions demand corrosion-resistant, maintenance-free hardware that doesn’t seize when the temperature drops 50 degrees overnight.

Is This for You? (Before You Buy)

Confirm these 3 “Truths” to ensure a 100% fit:

• [ ] Year: Do you have a 1999–2016 Ford Super Duty? (The 2017–2026 Super Duty uses revised rear frame geometry — it requires a separate BedStep unit).
• [ ] Rear Bumper: Are you running a stock rear bumper and tow package? Aftermarket rear bumpers, rear armor, and tow sensor brackets require clearance verification before ordering — measure twice.
• [ ] F-450 Config: F-450 buyers: confirm your rear bumper configuration and chassis cab body style with our team before ordering.

The Driver Experience (The Obsidian Take)

Most bed access solutions on a 1999–2016 Super Duty are a milk crate or a tire step that shifts every time you use it. We chose the 75303-01A because AMP Research’s frame-mounted BedStep deploys with a single foot tap, holds 300 lbs without flex, and stows flush beneath the bumper where road debris can’t reach it. The self-lubricating bushing system means zero maintenance — no grease schedule, no seized pivot pins after a winter, no step that stops working when you need it most. Expect a Super Duty that works as hard as the operation running it.

Obsidian DIY Notes

• Pro Tip: Measure twice before drilling — aftermarket liners, bed-extenders, and tow package brackets can interfere with the frame mount on this unit. Check your rear frame clearance before ordering and confirm no interference with the step travel path.
• What Else You’ll Need: Professional installation is recommended for optimal bracket alignment on the 1999–2016 Super Duty rear frame. If you’re running an aftermarket rear bumper or rear armor, contact our team to verify mounting clearance before we ship.

Technical Specifications

1999–2016 Ford Super Duty BedStep Specs

• SKU: 75303-01A
• Load Rating: 300 lbs
• Mount Type: Frame-mounted — driver or passenger side
• Activation: Foot-activated deploy / retract — no hands required
• Construction: High-strength aluminum alloy with stainless-steel pivot pins
• Bushings: Self-lubricating — maintenance-free operation
• Step Surface: Non-slip composite step pad — all-weather rated
• Storage: Stows flush beneath bumper — protected from road debris
• Finish: Corrosion-resistant for extended service life
• Weight: Ships via Ground (Standard Parcel) depending on regional warehouse availability.

Super Duty BedStep Installation & Technical Notes

• Difficulty: Moderate DIY / Professional Recommended for optimal bracket alignment
• Year Note: 1999–2016 platform only — 2017+ Super Duty requires a separate BedStep unit
• Clearance Note: Aftermarket rear bumpers, rear armor, and tow sensor brackets require clearance verification before installation
• F-450 Note: Chassis cab configurations require additional confirmation — contact our team before ordering
• Post-Install: No alignment or suspension recalibration required
• Policy Note: Once installed, the unit is non-returnable per AMP Research policy

Verified Fitment (OFAS Standard)

✅ CONFIRMED FITMENT:

• 1999–2016 Ford F-250 Super Duty — All bed lengths
• 1999–2016 Ford F-350 Super Duty SRW — All bed lengths
• 1999–2016 Ford F-450 Super Duty — Verify rear bumper and tow package clearance

❌ FITMENT REQUIREMENTS:

• 2017–2026 Ford Super Duty (P558/P702): Revised rear frame geometry — requires a platform-specific BedStep unit. Contact our team for the correct part number.
• Ford F-150 / Ranger: Different rear frame architecture — requires a model-specific BedStep unit. Contact our team for the correct part number.

Final Fitment Check

Don’t guess on your bed access setup. Text your VIN to (469) 407-7538 for a 100% Yes/No confirmation from an Obsidian Tech before we ship.