BDS 6-Inch Lift Kit | FOX 2.5 Performance Elite Coil-Overs | Aluminum/Stamped Steel | 5-Inch Rear Block | Silverado/Sierra 1500 4WD 2014-2018

BDS 6-Inch Lift Kit | FOX 2.5 Performance Elite Coil-Overs | Aluminum / Stamped Steel Control Arms | 5-Inch Rear Block | Chevy Silverado / GMC Sierra 1500 4WD 2014–2018 | SKU: 711PES

Is This for You?

This kit is for the 2014–2018 Chevy Silverado 1500 or GMC Sierra 1500 4WD owner with aluminum or stamped steel front control arms who wants 6 inches of lift at the FOX 2.5 Performance Elite level with a 5-inch rear axle block. Confirm your Silverado/Sierra has aluminum or stamped steel control arms — not cast steel knuckles. If you have cast steel knuckles, order SKU 710PES (5-inch block) or SKU 717PES (leaf springs). If you want FOX 2.0 instead, order SKU 710PSS (cast steel knuckles). Does not fit 2013 or earlier (GMT900) or 2019 or newer.

The Result

6 inches of front lift via FOX 2.5 PE coil-overs with matched 5-inch rear axle block and FOX PE rear shocks — engineered for the K2 Silverado/Sierra 1500 4WD platform with aluminum or stamped steel control arms. Premium tier, block rear system.

Verified Fitment (OFAS Standard)

• Chevy Silverado 1500 4WD: 2014–2018 — aluminum or stamped steel control arms
• GMC Sierra 1500 4WD: 2014–2018 — aluminum or stamped steel control arms

Does NOT fit: Cast steel knuckles — order SKU 710PES or 717PES. Does not fit 2WD. Does not fit 2013 or earlier (GMT900 platform). Does not fit 2019 or newer. Does not fit Silverado/Sierra 2500HD or 3500HD.

System Specifications

• SKU: 711PES
• Brand: BDS Suspension
• Front Lift Height: 6 inches — FOX 2.5 PE coil-overs
• Rear Lift Height: 5 inches — axle block with FOX PE rear shocks
• Control Arm Type: Aluminum or stamped steel — confirm before ordering
• Drivetrain: 4WD only
• Application: Chevy Silverado 1500 / GMC Sierra 1500 4WD 2014–2018 — aluminum or stamped steel control arms
• Warranty: BDS No-Fine-Print Warranty + FOX 1-year limited warranty

Master Kit Components

• FOX 2.5 Performance Elite coil-overs — pair (front)
• Aluminum/stamped steel control arm-specific lift components
• 5-inch rear axle blocks
• FOX Performance Elite rear shocks
• All required installation hardware

Installation & Fabrication Notes

• Professional installation required: 6-inch coil-over lift with rear block requires a qualified suspension shop.
• Alignment mandatory: Full front-end alignment required after installation. Do not drive on public roads before alignment is completed.
• Control arm confirmation mandatory: Confirm aluminum or stamped steel control arms before ordering. Cast steel knuckle requires SKU 710PES or 717PES.
• Rear block U-bolt torque: 5-inch axle blocks must be installed per BDS specifications — confirm U-bolt torque specs and axle centering after installation.
• Reservoir routing: Follow BDS and FOX installation instructions for reservoir placement — avoid pinch points and heat sources.
• Torque specs: Torque all fasteners to BDS specification per included installation instructions.

Wheel & Tire Fitment

At 6-inch lift on the K2 Silverado/Sierra 1500 platform, typical fitment runs 35–37-inch tires depending on wheel offset and backspacing. Confirm maximum tire diameter and wheel specs with your wheel/tire supplier before ordering.

Installation Warning

Application-specific. Confirm 2014–2018 Silverado/Sierra 1500 4WD with aluminum or stamped steel control arms before ordering. Cast steel knuckle — order SKU 710PES or 717PES. Does not fit 2WD, 2013 and earlier, or 2019 and newer. This product is non-returnable once installed.

Is your Silverado or Sierra a 2014–2018 1500 4WD? Aluminum/stamped steel or cast steel control arms? Do you want FOX 2.5 PE (this kit) or FOX 2.0? 5-inch block or leaf springs? Submit your year, model, drivetrain, and control arm type via the contact form and we’ll confirm the correct SKU before it ships.