BDS 6-Inch Lift Kit | FOX 2.0 Shocks | Leaf Springs + 3.5-Inch Axle | Ram 2500 4WD Gas 2009-2013

BDS 6-Inch Lift Kit | FOX 2.0 Performance Series Shocks | Leaf Springs + 3.5-Inch Axle Block | Ram 2500 4WD Gas 2009–2013 | SKU: BDS676FS

The BDS 6-Inch Suspension Lift Kit (SKU: BDS676FS) is a complete front and rear lift system for 2009–2013 Ram 2500 4WD gas models. The front system delivers a 6-inch lift using gas-tuned coil springs and geometry-correct radius arm correction brackets — maintaining proper caster, stabilizing steering, and preserving driveline alignment at lifted height. The rear system uses replacement leaf springs and 3.5-inch axle blocks to match the front lift height while maintaining load capacity and proper rear stance. The included FOX 2.0 Performance Series shocks provide improved damping control, heat resistance, and ride quality for towing, hauling, and daily use.

Ram 3500 fitment note: YMM data associated with this product includes 2009–2013 Ram 3500. Contact OFAS at 903-347-3875 to confirm Ram 3500 gas 2009–2013 compatibility before ordering. The verified fitment listed below reflects Ram 2500 only until Ram 3500 fitment is confirmed.

Verified Fitment (OFAS Standard)

• Ram 2500 4WD Gas: 2009–2013
• Ram 3500 4WD Gas 2009–2013: Contact OFAS at 903-347-3875 to confirm before ordering

Does NOT fit: Ram 2500 diesel — order BDS6673FS for 2009–2013 Ram 2500 diesel. Does not fit Ram 2500 2WD. Does not fit Ram 2500 2008 or earlier — different platform. Does not fit Ram 2500 2014 or newer — different platform. Does not fit Ram 1500 or Ram 1500 Classic. Confirm model year, drivetrain, and engine before ordering.

Gas vs. Diesel — 2009–2013 Ram 2500 6-Inch Kit

• Gas 4WD (BDS676FS, this listing): Gas-tuned coil springs, 3.5-inch rear axle block — for Ram 2500 4WD gas 2009–2013
• Diesel 4WD (BDS6673FS): Diesel-tuned coil springs, 4-inch rear axle block — for Ram 2500 4WD diesel 2009–2013. Different coil spring tuning and axle block height for diesel front-end weight.

Two Critical Fitment Gates

• 4WD only: This kit is engineered for 4WD Ram 2500. Does not fit 2WD models.
• Gas only: Coil springs are tuned for the gas engine platform. Does not fit diesel models — order BDS6673FS for diesel.

Front and Rear Lift System

• Front — 6-inch coil lift: Gas-tuned coil springs deliver 6 inches of front lift height. Geometry-correct radius arm correction brackets maintain proper caster and driveline alignment at lifted height.
• Rear — Leaf springs + 3.5-inch axle block: Replacement rear leaf springs and 3.5-inch axle blocks match the front lift height while maintaining rear load capacity and proper stance.
• Track bar correction: Maintains proper axle centering at lifted height.

FOX 2.0 Performance Series Shocks

• Improved damping: Significantly improved damping over factory shocks at lifted height
• Heat resistance: 2.0-inch shock body for improved heat dissipation during extended towing and off-road use
• Ride quality: Tuned for Ram 2500 4WD gas platform
• FOX warranty: 1-year limited warranty

What’s Included

• Gas-tuned front coil springs
• Geometry-correct radius arm correction brackets
• Track bar correction bracket
• Rear replacement leaf springs
• 3.5-inch rear axle blocks
• FOX 2.0 Performance Series shocks
• All required hardware and installation hardware

Technical Specifications

• SKU: BDS676FS
• Brand: BDS Suspension
• Lift Height: 6 inches (front) / matched rear via leaf springs + 3.5-inch axle block
• Front System: Gas-tuned coil springs + geometry-correct radius arm correction brackets
• Rear System: Replacement leaf springs + 3.5-inch axle blocks
• Shocks: FOX 2.0 Performance Series
• Application: Ram 2500 4WD Gas 2009–2013 (Ram 3500 — contact OFAS to confirm)
• Warranty: BDS No-Fine-Print Warranty + FOX 1-year limited warranty on shocks

Installation Notes

• Ram 3500 confirmation required: Contact OFAS at 903-347-3875 to confirm Ram 3500 gas 2009–2013 compatibility before ordering for a Ram 3500.
• Professional installation required: Front and rear suspension lift with geometry correction requires professional installation by a qualified suspension shop.
• Alignment mandatory: Full front-end alignment required after installation. Do not drive on public roads before alignment is completed.
• Driveline inspection: At 6-inch lift height, inspect driveshaft angles and U-joint operating angles after installation.
• Torque specs: All fasteners must be torqued to BDS specifications per installation instructions.
• Tire sizing: Contact OFAS at 903-347-3875 to confirm maximum tire size before ordering wheels and tires.

Installation Warning

Professional installation required. Alignment mandatory after installation. Driveline inspection required at 6-inch lift. Does not fit diesel — order BDS6673FS for diesel. Does not fit 2WD, 2008 or earlier, or 2014 or newer Ram 2500. Ram 3500 — confirm with OFAS before ordering.

Have you confirmed your Ram 2500 is a 2009–2013 4WD gas model — diesel instead? Order BDS6673FS. Ram 3500? Contact OFAS at 903-347-3875 to confirm fitment before ordering.