BDS 4-Inch 4-Link Lift Kit | FOX 2.0 Shocks | Ram 3500 4WD Gas 2019-2026 | No Rear Overload Leaf

BDS 4-Inch 4-Link Lift Kit | FOX 2.0 Shocks | Ram 3500 4WD Gas 2019–2026 | No Rear Overload Leaf | SKU: 1676FS

Is This for You?

This kit is for the 2019–2026 Ram 3500 4WD gas owner without the factory rear overload leaf spring who wants 4 inches of front lift via a 4-link conversion with FOX 2.0 damping. If your Ram 3500 HAS the factory rear overload leaf, stop here — order SKU 1677FS instead. Overload and non-overload kits are not interchangeable. If your Ram 3500 is diesel, stop here — different kit required. If your Ram 3500 has factory rear air ride, stop here — order SKU 1723FS.

The Result

4 inches of front lift via a true 4-link conversion on the Ram 3500 gas platform — corrected geometry, eliminated radius arm bind, improved articulation, and FOX 2.0 damping. The truck sits aggressive, clears larger tires, and maintains consistent geometry under towing and hauling loads.

Verified Fitment (OFAS Standard)

• Ram 3500 4WD Gas: 2019–2026 — without factory rear overload leaf spring

Does NOT fit: Ram 3500 with factory rear overload leaf — order SKU 1677FS. Does not fit Ram 3500 diesel. Does not fit Ram 3500 2WD. Does not fit Ram 3500 2018 or earlier. Does not fit Ram 3500 with factory rear air ride — order SKU 1723FS. Does not fit Ram 2500 or Ram 1500.

System Specifications

• SKU: 1676FS
• Brand: BDS Suspension
• Lift Height: 4 inches (front)
• Suspension Type: 4-link conversion — gas-tuned
• Shocks: FOX 2.0 Performance Series
• Application: Ram 3500 4WD Gas 2019–2026 — without factory rear overload leaf
• Warranty: BDS No-Fine-Print Warranty + FOX 1-year limited warranty

Master Kit Components

• 4-link front suspension conversion components
• Gas-tuned front coil springs
• FOX 2.0 Performance Series shocks
• Track bar correction bracket
• All required installation hardware

Installation & Fabrication Notes

• Professional installation required: 4-link conversion requires a qualified suspension shop.
• Alignment mandatory: Full front-end alignment required after installation. Do not drive on public roads before alignment is completed.
• Torque specs: Torque all fasteners to BDS specification per included installation instructions. Do not estimate.
• Break-in period: Allow FOX shocks to break in per FOX recommendations before aggressive off-road use.

Wheel & Tire Fitment

At 4-inch front lift on the Ram 3500 gas platform, typical fitment runs 35–37-inch tires depending on wheel offset and backspacing. Confirm maximum tire diameter and wheel specs with your wheel/tire supplier before ordering.

Installation Warning

Application-specific. Confirm 2019–2026 Ram 3500 4WD gas WITHOUT factory rear overload leaf before ordering. With overload leaf — order SKU 1677FS. Does not fit diesel, 2WD, air ride, or 2018 and earlier Ram 3500. This product is non-returnable once installed.

Does your Ram 3500 have the factory rear overload leaf spring or standard rear suspension? Gas or diesel? Do you have factory rear air ride instead? Those details determine which kit ships. Submit your year, engine, drivetrain, and rear suspension config via the contact form and we’ll confirm the correct SKU before it ships.