BDS 4-Inch Lift Kit | FOX 2.0 Shocks | Leaf Springs + 3.5-Inch Axle | Ram 2500 Power Wagon 4WD 2008

BDS 4-Inch Lift Kit | FOX 2.0 Performance Series Shocks | Leaf Springs + 3.5-Inch Axle Block | Ram 2500 Power Wagon 4WD 2008 | SKU: BDS1767FS

The BDS 4-Inch Lift Kit (SKU: BDS1767FS) is a complete front and rear lift system engineered specifically for the 2008 Ram 2500 Power Wagon 4WD, paired with FOX 2.0 Performance Series shocks. This kit is dedicated to the 2008 model year — BDS engineers a separate kit for 2008 vs. the 2005–2007 Power Wagon (BDS1764FS) due to suspension specification differences between model years. This kit is Power Wagon-specific and is not interchangeable with standard Ram 2500 lift kits. The front system delivers a 4-inch lift using Power Wagon-specific coil springs and geometry-correct radius arm brackets. The rear system uses replacement leaf springs and a 3.5-inch axle block.

Verified Fitment (OFAS Standard)

• Ram 2500 Power Wagon 4WD: 2008 only

Does NOT fit: Ram 2500 Power Wagon 2005–2007 — order BDS1764FS instead. Does not fit Ram 2500 Power Wagon 2009 or newer — different platform. Does not fit standard Ram 2500 2008 without Power Wagon package — contact OFAS at 903-347-3875 to confirm standard Ram 2500 compatibility. Does not fit Ram 3500. Does not fit Ram 1500 or Ram 1500 Classic. Confirm model year is exactly 2008 and Power Wagon package is present before ordering.

2008 vs. 2005–2007 Power Wagon — Why Separate Kits

• 2005–2007 Ram 2500 Power Wagon (BDS1764FS): First generation Power Wagon — dedicated kit for 2005–2007 suspension specifications
• 2008 Ram 2500 Power Wagon (BDS1767FS, this listing): Dedicated kit for 2008 suspension specifications — do not use 2005–2007 kit on a 2008 Power Wagon

Confirm your Power Wagon is exactly a 2008 model year before ordering. Contact OFAS at 903-347-3875 to verify.

Power Wagon — Why It Requires a Dedicated Kit

• Dana 60 front axle: The Power Wagon uses a Dana 60 front solid axle with locking hubs — different from the standard Ram 2500 front axle. Lift kit components must be engineered for the Dana 60 geometry.
• Factory disconnecting sway bar: The Power Wagon’s factory electronic sway bar disconnect system requires lift kit components that do not interfere with sway bar operation.
• Power Wagon-specific coil springs: Coil springs are tuned for the Power Wagon’s unique front axle weight, geometry, and suspension travel characteristics.
• Geometry-correct radius arm brackets: Engineered for the Power Wagon’s specific caster and radius arm geometry at 4-inch lift height.

Two Critical Fitment Gates

• Power Wagon package required: This kit is engineered for the Ram 2500 Power Wagon. Contact OFAS at 903-347-3875 to confirm compatibility for standard Ram 2500 2008 without the Power Wagon package.
• 2008 model year only: Do not order for 2007 or 2009. Confirm exact model year before ordering.

Front and Rear Lift System

• Front — 4-inch coil lift: Power Wagon-specific coil springs + geometry-correct radius arm brackets — engineered for 2008 Dana 60 front axle geometry
• Rear — Leaf springs + 3.5-inch axle block: Replacement rear leaf springs and 3.5-inch axle blocks match the front lift height while maintaining rear load capacity and proper stance
• Track bar correction: Maintains proper axle centering at lifted height

FOX 2.0 Performance Series Shocks

• Improved damping: Significantly improved damping over factory shocks at lifted height
• Heat resistance: 2.0-inch shock body for improved heat dissipation during towing and off-road use
• Ride quality: Tuned for 2008 Ram 2500 Power Wagon platform
• FOX warranty: 1-year limited warranty

What’s Included

• Power Wagon-specific front coil springs — 2008-specific
• Geometry-correct radius arm brackets — 2008-specific
• Track bar correction bracket
• Rear replacement leaf springs
• 3.5-inch rear axle blocks
• FOX 2.0 Performance Series shocks
• All required hardware and installation hardware

Technical Specifications

• SKU: BDS1767FS
• Brand: BDS Suspension
• Lift Height: 4 inches (front) / matched rear via leaf springs + 3.5-inch axle block
• Front System: Power Wagon-specific coil springs + geometry-correct radius arm brackets
• Rear System: Replacement leaf springs + 3.5-inch axle blocks
• Shocks: FOX 2.0 Performance Series
• Application: Ram 2500 Power Wagon 4WD 2008 only
• Warranty: BDS No-Fine-Print Warranty + FOX 1-year limited warranty on shocks

Installation Notes

• Professional installation required: Power Wagon-specific suspension lift requires professional installation by a qualified suspension shop familiar with the Dana 60 front axle and Power Wagon sway bar disconnect system.
• Alignment mandatory: Full front-end alignment required after installation. Do not drive on public roads before alignment is completed.
• Sway bar disconnect verification: Verify factory electronic sway bar disconnect system function after installation. Contact OFAS at 903-347-3875 if sway bar disconnect does not function correctly after installation.
• 2008 model year confirmation mandatory: Confirm your Power Wagon is exactly a 2008 model year before ordering.
• Torque specs: All fasteners must be torqued to BDS specifications per installation instructions.
• Tire sizing: Contact OFAS at 903-347-3875 to confirm maximum tire size before ordering wheels and tires.

Installation Warning

2008 model year only — do not use for 2007 or 2009. Professional installation required. Alignment mandatory. Sway bar disconnect verification required after installation. Power Wagon-specific kit — not interchangeable with standard Ram 2500 lift kits or 2005–2007 Power Wagon kits.

Have you confirmed your Ram 2500 is a 2008 Power Wagon 4WD — 2005–2007 Power Wagon? Order BDS1764FS. Standard Ram 2500 2008 without Power Wagon package? Contact OFAS at 903-347-3875 to confirm compatibility before ordering.