BDS 3-Inch Leveling Kit | Steel Strut Spacers | Toyota Tundra 2WD/4WD 2007-2021

BDS 3-Inch Leveling Kit | Steel Strut Spacers | Toyota Tundra 2WD/4WD 2007–2021 | SKU: 810H

The BDS 3-Inch Leveling Kit is a bolt-on steel strut spacer system engineered for 2007–2021 Toyota Tundra 2WD and 4WD. It eliminates the factory front-to-rear rake by raising the front 3 inches to match the rear stance — delivering a level, aggressive profile without replacing the factory strut assembly. Built for Tundra owners who want a cleaner stance and modest front clearance gain without committing to a full suspension lift.

Verified Fitment (OFAS Standard)

• Toyota Tundra 2WD: 2007–2021
• Toyota Tundra 4WD: 2007–2021

Does NOT fit: 2022+ Toyota Tundra (XK70 platform — different strut architecture). Does not fit 2006 or earlier Tundra. Does not fit Toyota Tacoma or 4Runner — different platform entirely.

Technical Specifications

• SKU: 810H
• Brand: BDS Suspension
• Lift Height: 3 inches (front leveling only)
• System Type: Steel strut spacers — bolt-on, no strut replacement
• Drivetrain: 2WD and 4WD compatible
• Application: Toyota Tundra 2007–2021
• Warranty: BDS No-Fine-Print Warranty

What Is a Leveling Kit — And Is It Right for You?

The 2007–2021 Tundra leaves the factory with a deliberate front-to-rear rake — the front sits lower to compensate for payload and towing loads. A leveling kit raises the front to match the rear, eliminating the rake for a flat, aggressive stance. This is not a full lift kit — it does not increase suspension travel or total ground clearance beyond the leveling correction. If you need additional lift height, suspension travel, or clearance for larger tires, a full lift kit is the correct solution.

• Eliminates factory rake: Front raised 3 inches to match rear stance
• Bolt-on simplicity: Installs over factory strut — no strut replacement, no cutting, no welding
• Steel construction: Heavy-duty steel spacers for long-term durability
• 2WD and 4WD compatible: Single kit covers both drivetrain configurations

Kit Contents

• BDS steel strut spacers — pair (front)
• All required installation hardware

Installation Notes

• Alignment required: Front-end alignment mandatory after installation to prevent accelerated tire wear.
• Inspect factory struts: Worn or leaking factory struts must be replaced before spacer installation — do not install over compromised struts.
• Torque specs: Torque all fasteners to BDS specification per included installation instructions. Do not estimate.
• Professional installation recommended: Requires proper lifting equipment, torque wrench, and suspension knowledge.
• Tire sizing: Confirm maximum tire diameter with your wheel/tire supplier before ordering. Leveling kits provide modest additional front clearance — not equivalent to a full lift.

Installation Warning

This kit is application-specific. Confirm your Tundra is a 2007–2021 model before ordering. Does NOT fit 2022 or newer Tundra — different platform, incompatible strut architecture. Incorrect installation or use on an incompatible vehicle voids warranty. This product is non-returnable once installed.

Engineering Question? Submit your Year / Make / Model / current lift height / tire size via the contact form and an OFAS fitment specialist will respond with a verified recommendation.