BDS 3.5-Inch Lift Kit | NX2 Nitro Shocks | Cast Aluminum Knuckle | Ford Ranger 4WD 2019-2023

BDS 3.5-Inch Lift Kit | NX2 Nitro Shocks | Cast Aluminum Knuckle | Ford Ranger 4WD 2019–2023 | SKU: 1545H

Is This for You?

This kit is for the 2019–2023 Ford Ranger 4WD owner with cast aluminum front knuckles who wants 3.5 inches of front lift at the NX2 Nitro entry-level price point. Confirm your Ranger has cast aluminum knuckles — not cast steel. If you have cast steel knuckles, order SKU 1906FSL (FOX 2.0) instead. If you want FOX 2.0 Performance shocks instead of NX2 Nitro, order SKU 1545FS. If you want FOX 2.0 coil-overs (FSL), order SKU 1545FSL.

The Result

3.5 inches of front lift engineered for the 2019–2023 Ranger 4WD platform with cast aluminum knuckles. The Ranger sits aggressive, clears larger tires, and maintains consistent geometry. NX2 Nitro shocks deliver improved damping over factory at this lift height at the lowest price point in the BDS Ranger lineup.

Verified Fitment (OFAS Standard)

• Ford Ranger 4WD: 2019–2023 — cast aluminum front knuckles

Does NOT fit: Ranger with cast steel knuckles — order SKU 1906FSL. Does not fit Ranger 2WD. Does not fit Ranger 2018 or earlier. Does not fit Ranger 2024 or newer without confirmation.

System Specifications

• SKU: 1545H
• Brand: BDS Suspension
• Lift Height: 3.5 inches (front)
• Knuckle Type: Cast aluminum — confirm before ordering
• Shocks: NX2 Nitro — entry-level
• Application: Ford Ranger 4WD 2019–2023 — cast aluminum knuckle
• Warranty: BDS No-Fine-Print Warranty

Shock Tier Guide — Cast Aluminum Knuckle

• NX2 Nitro (SKU 1545H, this listing): Entry-level — lowest price point
• FOX 2.0 Performance (SKU 1545FS): Mid-tier — improved damping and heat resistance
• FOX 2.0 Coil-Overs (SKU 1545FSL): Premium coil-over configuration

Master Kit Components

• BDS lift components — cast aluminum knuckle-specific
• NX2 Nitro shocks
• All required installation hardware

Installation & Fabrication Notes

• Professional installation required: Front lift on the Ranger platform requires a qualified suspension shop.
• Alignment mandatory: Full front-end alignment required after installation. Do not drive on public roads before alignment is completed.
• Knuckle confirmation mandatory: Confirm cast aluminum knuckle before ordering. Cast steel knuckle requires a different kit.
• Torque specs: Torque all fasteners to BDS specification per included installation instructions.

Wheel & Tire Fitment

At 3.5-inch front lift on the Ranger platform, typical fitment runs 33–35-inch tires depending on wheel offset and backspacing. Confirm maximum tire diameter and wheel specs with your wheel/tire supplier before ordering.

Installation Warning

Application-specific. Confirm 2019–2023 Ford Ranger 4WD with cast aluminum front knuckles before ordering. Cast steel knuckle — order SKU 1906FSL. Does not fit 2WD or 2018 and earlier Ranger. This product is non-returnable once installed.

Does your Ranger have cast aluminum or cast steel front knuckles? Do you want NX2 Nitro (this kit), FOX 2.0 Performance (SKU 1545FS), or FOX 2.0 coil-overs (SKU 1545FSL)? Submit your year, drivetrain, and knuckle type via the contact form and we’ll confirm the correct SKU before it ships.