BDS 2-Inch Lift Kit | FOX 2.0 Snap Ring Struts | Silverado/Sierra 1500 4WD 2014-2018 | Aluminum or Stamped Steel Control Arms

BDS 2-Inch Lift Kit | FOX 2.0 Snap Ring Struts | Chevy Silverado / GMC Sierra 1500 4WD 2014–2018 | Aluminum or Stamped Steel Control Arms | SKU: BDS758FSR

The BDS 2-Inch Lift Kit (SKU: BDS758FSR) is a complete 2-inch front lift system for 2014–2018 Chevy Silverado 1500 and GMC Sierra 1500 4WD models equipped with aluminum or stamped steel control arms, featuring FOX 2.0 Performance Series snap ring struts. This kit does not fit models with cast steel control arms — confirm your control arm type before ordering. The FOX 2.0 snap ring strut replaces the factory strut assembly and features an adjustable snap ring design that allows precise preload tuning for improved ride quality and front-end control. BDS geometry-correct components maintain proper CV angles and steering geometry at 2-inch lift height.

Verified Fitment (OFAS Standard)

• Chevy Silverado 1500 4WD: 2014–2018 — aluminum or stamped steel control arms only
• GMC Sierra 1500 4WD: 2014–2018 — aluminum or stamped steel control arms only

Does NOT fit: Silverado/Sierra 1500 with cast steel control arms — confirm control arm type before ordering. Does not fit 2WD/RWD models. Does not fit Silverado/Sierra 1500 2019 or newer — different platform (T1 generation). Does not fit Silverado/Sierra 1500 2013 or earlier. Does not fit Silverado/Sierra 2500HD or 3500HD — different platform. Confirm model year, drivetrain, and control arm type before ordering.

Critical Fitment Gate — Control Arm Type

The 2014–2018 Silverado/Sierra 1500 was produced with three different front control arm materials depending on trim level and build date. This kit fits two of the three types.

• Aluminum control arms — fits (BDS758FSR)
• Stamped steel control arms — fits (BDS758FSR)
• Cast steel control arms — does NOT fit — contact OFAS at 903-347-3875 to confirm the correct kit for cast steel control arms

If you are unsure which control arm type your Silverado/Sierra 1500 has, contact OFAS at 903-347-3875 before ordering. Ordering the wrong kit for your control arm type will result in fitment incompatibility.

One Critical Fitment Gate

• 4WD only: The 2014–2018 Silverado/Sierra 1500 is available in both 4WD and 2WD/RWD. This kit is for 4WD models only.

FOX 2.0 Snap Ring Struts — What They Are

A snap ring strut replaces the complete factory strut assembly — strut body, spring perch, and damper — as a single unit. The snap ring design allows the spring preload to be adjusted at multiple positions, enabling fine-tuning of ride height and spring rate without replacing components.

• Adjustable preload: Snap ring positions allow precise preload tuning for ride height and spring rate
• FOX 2.0 damping: Improved damping control and heat management vs. factory struts
• Direct bolt-on: Replaces factory strut assembly — no cutting or welding required
• CV angle preservation: Maintains factory CV joint operating angles at 2-inch lift height
• FOX warranty: 1-year limited warranty

What’s Included

• FOX 2.0 snap ring struts — pair (front)
• BDS geometry-correct lift components
• All required hardware and installation hardware

Technical Specifications

• SKU: BDS758FSR
• Brand: BDS Suspension
• Lift Height: 2 inches (front)
• Front System: FOX 2.0 snap ring struts — adjustable preload
• Control Arm Compatibility: Aluminum or stamped steel only — not cast steel
• Application: Chevy Silverado 1500 and GMC Sierra 1500 4WD 2014–2018
• Warranty: BDS No-Fine-Print Warranty + FOX 1-year limited warranty on struts

Installation Notes

• Professional installation required: Strut replacement requires professional installation by a qualified suspension shop with proper spring compressor equipment.
• Alignment mandatory: Full front-end alignment required after installation. Do not drive on public roads before alignment is completed.
• Control arm type confirmation mandatory: Confirm aluminum or stamped steel control arms before installation. Do not install on cast steel control arms.
• Snap ring preload setting: Set snap ring preload position per BDS installation instructions before installation.
• Torque specs: All fasteners must be torqued to BDS specifications per installation instructions.
• Tire sizing: Contact OFAS at 903-347-3875 to confirm maximum tire size before ordering wheels and tires.

Installation Warning

Professional installation required. Alignment mandatory. Does not fit cast steel control arms — confirm control arm type before ordering. Does not fit 2WD/RWD, 2013 or earlier, or 2019 or newer Silverado/Sierra 1500. Does not fit Silverado/Sierra HD.

Have you confirmed your Silverado/Sierra 1500 is a 2014–2018 4WD model with aluminum or stamped steel control arms — cast steel control arms? Contact OFAS at 903-347-3875 to confirm the correct kit before ordering. 2019 or newer? Different platform — contact OFAS at 903-347-3875.