{"product_id":"zone-offroad-6-inch-lift-kit-zonf122n-ford-f150-2021-2026-2wd","title":"Zone Offroad 6-Inch Lift Kit — Ford F-150 (2WD) SKU: ZONF122N","description":"\u003cp dir=\"ltr\"\u003eThis kit lifts the 2021–2026 Ford F-150 RWD 6 inches up front and 3 inches in the rear using high-strength crossmembers, redesigned steering knuckles, and strut spacers paired with a rear block kit and Zone Nitro Series rear shocks — engineered to correct suspension, steering, and driveline geometry while maintaining ESC system compliance and Blue Cruise compatibility.\u003c\/p\u003e\n\u003chr\u003e\n\u003cblockquote\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e Fits 2021–2026 Ford F-150, RWD (2WD) only. Does not fit diesel models. Does not fit Tremor models. Does not fit 4WD configurations. Installation requires frame bracket modification. Trucks with a 2-piece rear driveshaft require carrier bearing shim kit D5406, sold separately. Confirm your model year's supported trim before ordering — trim availability narrows significantly for 2024 and later years.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequired separately:\u003c\/strong\u003e Carrier bearing shim kit D5406 (required for 2-piece rear driveshaft models). ADAS sensor recalibration by a dealership or ADAS service center is required after installation — all associated costs are the vehicle owner's responsibility.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch4 dir=\"ltr\"\u003eVerified Fitment\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eMake\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eModel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTrim\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eModel Years\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDrive Type\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFuel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch, Lariat, Limited, Platinum, SSV, XL, XLT\u003c\/td\u003e\n\u003ctd\u003e2021–2023\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003ctd\u003eGas \/ Flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV, STX, XL, XLT\u003c\/td\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003ctd\u003eGas \/ Flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSTX, XL, XLT\u003c\/td\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003ctd\u003eGas \/ Flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV, STX, XL, XLT\u003c\/td\u003e\n\u003ctd\u003e2026\u003c\/td\u003e\n\u003ctd\u003eRWD\u003c\/td\u003e\n\u003ctd\u003eGas \/ Flex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDiesel exclusion:\u003c\/strong\u003e Does not fit diesel models in any year.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTremor exclusion:\u003c\/strong\u003e Does not fit Tremor models.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e4WD exclusion:\u003c\/strong\u003e This kit is for RWD (2WD) F-150 configurations only.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e2024 trim note:\u003c\/strong\u003e King Ranch, Lariat, Limited, and Platinum trims are not listed in Zone's fitment data for the 2024 model year. Supported 2024 trims are SSV, STX, XL, and XLT only.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e2025 trim note:\u003c\/strong\u003e Supported 2025 trims are STX, XL, and XLT only.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFord Recall 21S25:\u003c\/strong\u003e Zone Offroad recommends completing Ford Safety Recall 21S25 (rear driveshaft) prior to installing this kit on affected trucks.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eComponent Specifications\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eZone Offroad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eZONF122N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront lift method\u003c\/td\u003e\n\u003ctd\u003eHigh-strength crossmember and strut spacer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront lift height\u003c\/td\u003e\n\u003ctd\u003e6 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear lift method\u003c\/td\u003e\n\u003ctd\u003eBlock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear lift height\u003c\/td\u003e\n\u003ctd\u003e3 inches (this configuration)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear block configuration\u003c\/td\u003e\n\u003ctd\u003e3-Inch Block Kit (tail-low to level stance)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront shocks\u003c\/td\u003e\n\u003ctd\u003eOE front strut retained; strut spacers added\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear shocks included\u003c\/td\u003e\n\u003ctd\u003eYes — Zone Nitro Series (nitrogen-charged, twin-tube, 10-stage velocity-sensitive valving)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering knuckles\u003c\/td\u003e\n\u003ctd\u003eRedesigned, application-specific for 2021–2025 F-150; maintains ESC system compliance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlue Cruise compatibility\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESC compatibility\u003c\/td\u003e\n\u003ctd\u003eYes — maintained by redesigned steering knuckles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTire clearance\u003c\/td\u003e\n\u003ctd\u003e35 inches confirmed; up to 37 inches possible depending on wheel and tire configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated install time\u003c\/td\u003e\n\u003ctd\u003e8–10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifficulty level\u003c\/td\u003e\n\u003ctd\u003eDifficult\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eFactory Protection Plus — 5-year\/60,000-mile drivetrain warranty + Zone Offroad Limited Lifetime Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eWhat Is and Is NOT Included\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHigh-strength crossmembers (lower control arm positioning correction)\u003c\/li\u003e\n\u003cli\u003eRedesigned application-specific steering knuckles (geometry and ESC compatibility correction)\u003c\/li\u003e\n\u003cli\u003eStrut spacers (6\" front lift)\u003c\/li\u003e\n\u003cli\u003eRear lift blocks and extended u-bolts (3\" rear lift — this configuration)\u003c\/li\u003e\n\u003cli\u003eZone Nitro Series rear shocks\u003c\/li\u003e\n\u003cli\u003eAll required installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eCarrier bearing shim kit D5406 (required for 2-piece rear driveshaft models, sold separately)\u003c\/li\u003e\n\u003cli\u003e4-Inch Block Kit rear lift option (separate configuration, not this SKU\/configuration)\u003c\/li\u003e\n\u003cli\u003eADAS recalibration (required post-installation, performed by dealership or ADAS service center)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eCritical Compatibility\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel exclusion:\u003c\/strong\u003e Does not fit diesel models. Gas and flex fuel only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTremor exclusion:\u003c\/strong\u003e Does not fit Tremor models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4WD exclusion:\u003c\/strong\u003e RWD (2WD) F-150 only. Does not fit 4WD configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim availability by year:\u003c\/strong\u003e King Ranch, Lariat, Limited, and Platinum trims are supported for 2021–2023 only. For 2024, 2025, and 2026, only SSV, STX, XL, and XLT are listed in Zone's verified fitment data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame bracket modification required:\u003c\/strong\u003e Installation requires modification of the frame bracket. This is not optional.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-piece rear driveshaft:\u003c\/strong\u003e Models with a 2-piece rear driveshaft require carrier bearing shim kit D5406 (not included, sold separately). Confirm driveshaft configuration before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFord Recall 21S25:\u003c\/strong\u003e If your truck is subject to Ford Safety Recall 21S25 (rear driveshaft), complete that recall procedure before installing this kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear block:\u003c\/strong\u003e This configuration uses the 3-inch block kit, which provides a tail-low to level stance. The 4-inch block kit (level to tail-high stance) is a separate configuration. Block kits replace the factory 1-1\/4\" block — the stock block will not be reinstalled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrash bars:\u003c\/strong\u003e Crash bars may require modification depending on wheel and tire choice. It is the end user's responsibility to ensure all modifications are non-detrimental to vehicle safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADAS recalibration:\u003c\/strong\u003e After installation, cameras, radar, LiDAR, and other ADAS sensors — including lane keeping, blind-spot detection, adaptive cruise control, and parking assistance — require recalibration by a dealership or certified ADAS service center. All recalibration costs are the vehicle owner's responsibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire fitment:\u003c\/strong\u003e 35\" tires are confirmed. Up to 37x12.50 tires may be achievable depending on wheel and tire configuration; trimming may be required. Wheel backspacing specifications for 37\" tire configurations were not supplied in the source documentation — confirm with Zone Offroad before selecting a 37\" tire and wheel combination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eProfessional installation is strongly recommended for this kit, which is rated Difficult with an estimated 8–10-hour install time. A professional alignment must be completed after installation. ADAS sensor recalibration by a dealership or ADAS service center is also required after installation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequired tools:\u003c\/strong\u003e 204-592 Ball Joint Separator (recommended), Tie Rod End Separator (recommended), torque wrench, reciprocating saw, socket wrench.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBefore beginning installation:\u003c\/strong\u003e Confirm driveshaft configuration. If the truck has a 2-piece rear driveshaft, carrier bearing shim kit D5406 must be on hand. If the truck is subject to Ford Recall 21S25, complete that recall procedure first.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFrame modification:\u003c\/strong\u003e This installation requires frame bracket modification. Follow the Zone Offroad installation instructions for the approved procedure.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRefer to the current Zone Offroad installation instructions supplied with this kit for complete procedures, torque specifications, and all safety requirements.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThe Obsidian Take\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe ZONF122N gives the 2021–2026 Ford F-150 RWD a 6-inch front and 3-inch rear lift — this configuration is the 3-inch block kit (tail-low to level stance) with Zone Nitro Series rear shocks and strut spacers up front retaining the OE strut. The redesigned steering knuckles are application-specific to the 2021–2025 F-150 and maintain ESC compliance and Blue Cruise functionality. Five conditions to confirm before ordering: RWD only (no 4WD); gas and flex fuel only (no diesel); no Tremor models; frame bracket modification is required; and 2-piece driveshaft trucks need carrier bearing shim kit D5406 (not included). For 2024 and later, only SSV, STX, XL, and XLT are in Zone's supported trim list — King Ranch, Lariat, Limited, and Platinum buyers on a 2024 or newer truck should verify fitment with Zone directly before ordering.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYou own a 2021–2026 Ford F-150 RWD, gas or flex fuel, in a supported trim for your model year.\u003c\/li\u003e\n\u003cli\u003eYou want a 6\" front \/ 3\" rear lift (tail-low to level stance) with geometry-corrected steering knuckles.\u003c\/li\u003e\n\u003cli\u003eYou want Zone Nitro Series rear shocks included.\u003c\/li\u003e\n\u003cli\u003eYou are prepared for a Difficult-rated, 8–10-hour installation requiring a reciprocating saw, frame bracket modification, and pitman arm puller.\u003c\/li\u003e\n\u003cli\u003eYou have confirmed your driveshaft configuration and sourced D5406 if your truck has a 2-piece rear driveshaft.\u003c\/li\u003e\n\u003cli\u003eYou are prepared to complete ADAS recalibration at a dealership or ADAS service center after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is Not For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYour F-150 is a diesel model.\u003c\/li\u003e\n\u003cli\u003eYour F-150 is a Tremor model.\u003c\/li\u003e\n\u003cli\u003eYour F-150 is a 4WD configuration.\u003c\/li\u003e\n\u003cli\u003eYour 2024, 2025, or 2026 F-150 is a King Ranch, Lariat, Limited, or Platinum trim — those trims are not in Zone's verified fitment for those years.\u003c\/li\u003e\n\u003cli\u003eYou have a 2-piece rear driveshaft and are not prepared to obtain carrier bearing shim kit D5406 before installation.\u003c\/li\u003e\n\u003cli\u003eYou want the tail-high to level stance — that requires the separate 4-inch block kit configuration.\u003c\/li\u003e\n\u003cli\u003eYou are not prepared for frame bracket modification during installation.\u003c\/li\u003e\n\u003cli\u003eYou are not prepared to complete ADAS recalibration after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eCommon Questions\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this kit fit diesel F-150 trucks?\u003c\/strong\u003e\u003cbr\u003eNo. Gas and flex fuel models only.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this fit the F-150 Tremor?\u003c\/strong\u003e\u003cbr\u003eNo. Tremor models are explicitly excluded.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this fit 4WD F-150 trucks?\u003c\/strong\u003e\u003cbr\u003eNo. This kit is for RWD (2WD) configurations only.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eI have a 2024 F-150 Lariat — does this fit?\u003c\/strong\u003e\u003cbr\u003eThe Lariat trim is not listed in Zone's verified fitment data for the 2024 model year. Contact Zone Offroad directly to confirm before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMy F-150 has a 2-piece rear driveshaft — what do I need?\u003c\/strong\u003e\u003cbr\u003eCarrier bearing shim kit D5406 is required. It is not included with this kit. Confirm your driveshaft configuration and source the shim kit before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is the difference between the 3-inch and 4-inch rear block options?\u003c\/strong\u003e\u003cbr\u003eThe 3-inch block kit (this configuration) provides a tail-low to level stance. The 4-inch block kit provides a level to tail-high stance. Both replace the factory 1-1\/4\" block — the stock block is not reinstalled.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWill 37\" tires fit?\u003c\/strong\u003e\u003cbr\u003e35\" tires are confirmed for this kit. Up to 37x12.50 tires may fit depending on wheel and tire configuration, but trimming may be required and specific backspacing specifications for 37\" combinations were not provided in the source documentation. Confirm with Zone Offroad before selecting a 37\" tire and wheel setup.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this kit maintain Blue Cruise and ESC compatibility?\u003c\/strong\u003e\u003cbr\u003eYes. The application-specific redesigned steering knuckles are engineered to maintain ESC system compliance, and the kit is confirmed to function with Ford Blue Cruise.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs ADAS recalibration required?\u003c\/strong\u003e\u003cbr\u003eYes. After installation, all ADAS systems including lane keeping, blind-spot detection, adaptive cruise control, and parking assistance require recalibration by a dealership or certified ADAS service center. All recalibration costs are the vehicle owner's responsibility.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat does this kit's warranty cover?\u003c\/strong\u003e\u003cbr\u003eThis kit is backed by Factory Protection Plus: a 5-year\/60,000-mile drivetrain warranty plus Zone Offroad's Limited Lifetime Warranty. See the full warranty summary below.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eManufacturer Data Disclaimer\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eFitment, specification, included-component, and installation data for this kit are sourced from Zone Offroad manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eRequired Legal, Warning, Fitment, and Return Notices\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eInstallation Warning:\u003c\/strong\u003e Zone Offroad strongly recommends installation by a certified mechanic. If installed by a non-certified person, the installer must read, understand, and follow all instructions and warnings before beginning.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eADAS Notice:\u003c\/strong\u003e Recalibration of your vehicle's Advanced Driver Assistance System cameras, radars, LiDAR, and other sensors may be required by your dealership or ADAS service center after installation. All charges and expenses related to recalibration are the sole responsibility of the vehicle owner.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e Confirm California compliance for modified-height vehicles before purchase.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWarranty Summary:\u003c\/strong\u003e This kit is backed by Factory Protection Plus, which provides a 5-year\/60,000-mile drivetrain warranty combined with Zone Offroad's Limited Lifetime Warranty for the original retail purchaser. Zone Offroad also provides a 3-year\/36,000-mile Worry-Free Warranty on all hard parts and wearable items (ball joints, tie rod ends, and bushings) to the original retail purchaser, based on whichever limit is reached first. After the 3-year\/36,000-mile period, the Limited Lifetime Warranty applies, covering defects in materials and workmanship for as long as the original purchaser owns the vehicle on which the product was installed. Warranty coverage does not extend to consumer opinions regarding ride comfort, fitment, or design.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFinish Warranty:\u003c\/strong\u003e Product finish may be considered for warranty within 12 months of purchase. Damage caused by tools, road debris, trail use, general maintenance, or salty and corrosive environments is excluded.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eZone Offroad Nitro Series Shocks:\u003c\/strong\u003e Shock oil seal wear is not covered under warranty. Leaking shock seals that occur within 2 years of purchase, free from contamination, damage, or abnormal wear resulting from misuse, may be considered for warranty review.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCommercial vehicles:\u003c\/strong\u003e Warranty is limited to 1 year for commercial application vehicles.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWarranty exclusions:\u003c\/strong\u003e This warranty does not cover damage or failure resulting from abuse, neglect, accident, fire, improper installation or adjustment, or corrosion; modifications beyond Zone Offroad specifications; use in an application other than those specified in current Zone Offroad documentation; competition or racing use; or products that wear out due to the use of larger-than-specified wheels or tires.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot covered under any warranty term:\u003c\/strong\u003e Labor for removal or reinstallation, expedited freight charges, damage to related vehicle components, vehicle downtime costs, lost profits, and incidental or consequential damages.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTo file a claim:\u003c\/strong\u003e Contact Zone Offroad directly at \u003ca href=\"mailto:Tech-Zone@ridefox.com\"\u003eTech-Zone@ridefox.com\u003c\/a\u003e or 888-998-9663. Only Zone Offroad can approve or deny a warranty request. Proof of purchase is required, including customer name, purchase date, vehicle mileage, product number, and price paid. Product photos are also required. If the claim is approved, Zone Offroad will replace or repair the product and cover ground shipping at no cost. If the defective part must be returned, a prepaid return shipping label will be provided.\u003c\/p\u003e","brand":"Zone Off-Road","offers":[{"title":"Default Title","offer_id":51417112445249,"sku":"F122N","price":1395.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/ZONF122N-FQMS.jpg?v=1771967351","url":"https:\/\/obsidianforgedautosupply.com\/products\/zone-offroad-6-inch-lift-kit-zonf122n-ford-f150-2021-2026-2wd","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}