{"product_id":"spod-ethernet-cable-3ft-bantamx-sourcelt","title":"sPOD Ethernet Universal Control Cable | 3-Foot | BantamX SourceLT Mini6 Mini4 | 910025","description":"\u003ch2\u003eIs This for You?\u003c\/h2\u003e\n\u003cp\u003eYou have an existing \u003cstrong\u003esPOD BantamX, SourceLT, Mini6, or Mini4 system\u003c\/strong\u003e and need a \u003cstrong\u003e3-foot Ethernet cable\u003c\/strong\u003e for a short, direct routing path — your module and switch interface are close together but need more than 1 foot of cable reach to route cleanly without stressing the connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable only — switch panel and power module are NOT included.\u003c\/strong\u003e If 1 foot is sufficient and your components are truly co-located, see SKU 910010 ($7.00). If you need more reach, see the 10-foot (910000, $29.00) or longer options.\u003c\/p\u003e\n\n\u003ch2\u003eThe Result\u003c\/h2\u003e\n\u003cp\u003eA reinforced, weather-resistant 3-foot Ethernet cable that connects your sPOD power module to your switch interface with a short, clean routing path — enough reach to route properly without excess slack, and signal-stable in harsh off-road and outdoor environments.\u003c\/p\u003e\n\n\u003ch2\u003esPOD Ethernet Cable Lineup — Choose Your Length\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e910010 — 1-Foot — $7.00:\u003c\/strong\u003e Truly co-located installs only.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e910025 — 3-Foot — $12.00 (this listing):\u003c\/strong\u003e Short clean routing with proper bend radius.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e910000 — 10-Foot — $29.00:\u003c\/strong\u003e Standard reach for most installations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e910005 — 15-Foot — $35.00:\u003c\/strong\u003e Extended reach for longer routing paths.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e910015 — 25-Foot — $45.00:\u003c\/strong\u003e Long-distance routing for large builds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e910020 — 30-Foot — $59.95:\u003c\/strong\u003e Maximum reach for the largest builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMeasure your routing distance from power module to switch interface before ordering. Choose the shortest cable that covers your path with proper bend radius at both connectors.\u003c\/p\u003e\n\n\u003ch2\u003e3-Foot Cable — Short-Routing Use Case\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShort direct routing\u003c\/strong\u003e — for builds where 1 foot is too tight but 10 feet creates excess slack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProper connector bend radius\u003c\/strong\u003e — 3 feet allows clean routing without stressing the plug at either end\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReinforced shielding\u003c\/strong\u003e — signal-stable in high-vibration environments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather-resistant construction\u003c\/strong\u003e — rated for off-road and outdoor exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCable Only — What's Included and What's Not\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThis IS:\u003c\/strong\u003e A 3-foot Ethernet cable for connecting sPOD power modules to switch interfaces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThis is NOT:\u003c\/strong\u003e A complete kit — switch panel and power module not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003esPOD BantamX systems — compatible ✓\u003c\/li\u003e\n  \u003cli\u003esPOD SourceLT systems — compatible ✓\u003c\/li\u003e\n  \u003cli\u003esPOD Mini6 interfaces — compatible ✓\u003c\/li\u003e\n  \u003cli\u003esPOD Mini4 interfaces — compatible ✓\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm your specific sPOD system and firmware version are compatible before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number \/ SKU:\u003c\/strong\u003e 910025\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e sPOD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Ethernet Control Cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 3 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Ethernet (reinforced shielding)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Resistance:\u003c\/strong\u003e Weather-resistant construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e BantamX, SourceLT, Mini6, Mini4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.0 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 5-year manufacturer warranty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Each (cable only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003esPOD 3-foot Ethernet control cable\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSwitch panel NOT included\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePower module NOT included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVerify routing path.\u003c\/strong\u003e 3 feet covers short direct runs. If your path requires more reach, order the 10-foot (910000) or longer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfirm system compatibility.\u003c\/strong\u003e Verify this cable is compatible with your specific sPOD system and firmware version before ordering.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProfessional installation recommended.\u003c\/strong\u003e Electrical integration requires a qualified technician.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eEngineering Question:\u003c\/strong\u003e Why 3 feet instead of 1 foot? Connector bend radius. A 1-foot cable between components that are 10 inches apart straight-line may require a tight bend at the plug that stresses the connector housing over time. 3 feet gives you enough slack to route cleanly, loop once for strain relief, and still keep the install tight.\u003c\/blockquote\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":51449714245953,"sku":"910025","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/910025_0-GNJV.jpg?v=1772852445","url":"https:\/\/obsidianforgedautosupply.com\/products\/spod-ethernet-cable-3ft-bantamx-sourcelt","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}