{"product_id":"spod-bantamx-touchscreen-kit-870140-ford-f250-f350-super-duty-2023-2026","title":"sPOD BantamX Touchscreen Power Management Kit — Ford F-250\/F-350 Super Duty SKU: 870140","description":"\u003cp dir=\"ltr\"\u003eThis vehicle-specific power management kit integrates the sPOD 3.5-inch digital touchscreen into the factory sunglass holder location of the 2023–2026 Ford F-250\/F-350 Super Duty upper console, providing 8 circuits of 30-amp power per channel with Bluetooth app control, programmable output modes, and built-in low-voltage cutoff protection — connected by a single ethernet cable with no relays, wiring looms, or circuit fuses required.\u003c\/p\u003e\n\u003chr\u003e\n\u003cblockquote\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e This is a Built to Order product. Call for availability and lead time before placing your order. Fits 2023–2026 Ford F-250 Super Duty and F-350 Super Duty. Confirm your cab and console configuration matches this kit before ordering.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequired separately:\u003c\/strong\u003e Accessory devices and add-on circuits beyond the included 8-channel BantamX system. Additional BantamX modules required for uLINK expansion beyond 8 channels (up to 32 channels total, sold separately).\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch4 dir=\"ltr\"\u003eVerified Fitment\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eMake\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eModel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eModel Years\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2023–2026\u003c\/td\u003e\n\u003ctd\u003eVehicle-specific touchscreen console kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2023–2026\u003c\/td\u003e\n\u003ctd\u003eVehicle-specific touchscreen console kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eComponent Specifications\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003esPOD (Baja Designs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e870140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eBantamX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController\u003c\/td\u003e\n\u003ctd\u003e3.5-inch digital touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouchscreen mounting location\u003c\/td\u003e\n\u003ctd\u003eReplaces factory sunglass holder in upper console\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCircuits\u003c\/td\u003e\n\u003ctd\u003e8, each rated 30 amps at 12.5 VDC; 100A total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal block\u003c\/td\u003e\n\u003ctd\u003e16-position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery protection\u003c\/td\u003e\n\u003ctd\u003eIntegrated low-voltage cutoff (LVCO) with optional override\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeep sleep mode\u003c\/td\u003e\n\u003ctd\u003eYes — power-saving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn-line fuse\u003c\/td\u003e\n\u003ctd\u003e100 amp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported voltage\u003c\/td\u003e\n\u003ctd\u003e12 VDC or 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBluetooth\u003c\/td\u003e\n\u003ctd\u003eBuilt-in sPODConnect Bluetooth; programmable via sPOD app (iOS and Android)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgrammable modes\u003c\/td\u003e\n\u003ctd\u003eOutput dimming, strobing, flashing, master-slave, memory, auto power-up, momentary, switch linking, input control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput control\u003c\/td\u003e\n\u003ctd\u003eAutomates functions for all switch circuits via factory wiring integration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eController ports\u003c\/td\u003e\n\u003ctd\u003e2 (supports 2 different controllers per system)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem scalability\u003c\/td\u003e\n\u003ctd\u003euLINK allows expansion to up to 32 channels via linked BantamX modules, controlled by one controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer warranty\u003c\/td\u003e\n\u003ctd\u003e5-year manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eWhat Is and Is NOT Included\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eComponent\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBantamX System\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e36\" Battery Cable Set\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital Touchscreen (3.5-inch)\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Cable\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Bracket\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll necessary hardware\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eCritical Compatibility\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eFits 2023–2026 Ford F-250 Super Duty and F-350 Super Duty only.\u003c\/li\u003e\n\u003cli\u003eTouchscreen is designed to replace the factory sunglass holder in the upper console. Confirm your truck's upper console includes this factory sunglass holder location before ordering.\u003c\/li\u003e\n\u003cli\u003eThis is a Built to Order product — contact OFAS before ordering to confirm availability and lead time.\u003c\/li\u003e\n\u003cli\u003eUse only the included sPOD battery cables on the positive and negative terminal studs of the BantamX board. Attaching any other cable to these terminals voids the warranty.\u003c\/li\u003e\n\u003cli\u003eConnecting battery cables with reversed polarity voids the warranty.\u003c\/li\u003e\n\u003cli\u003eDo not connect an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post used by the BantamX system. Per manufacturer documentation, this causes irreversible damage and voids all warranties.\u003c\/li\u003e\n\u003cli\u003eDo not cut, splice, or otherwise modify the supplied wiring, connectors, or switches. Any such modification voids the warranty.\u003c\/li\u003e\n\u003cli\u003euLINK scalability to 32 channels requires additional BantamX modules (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eProfessional installation is strongly recommended. A single ethernet cable connects the BantamX unit to the touchscreen in the cab — no relays, wiring looms, or circuit fuses are required. The touchscreen replaces the factory sunglass holder panel. The BantamX power control module connects to the vehicle's battery using the included cable set.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRefer to the current sPOD\/Baja Designs installation instructions for this SKU (FGXX_870140-INS_001) for complete procedures, torque specifications, and all safety requirements.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThe Obsidian Take\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe 870140 is sPOD's touchscreen power management solution for the 2023–2026 F-250\/F-350 Super Duty — 8 circuits at 30 amps each, a 3.5-inch touchscreen that drops into the factory sunglass holder location for a factory-finish appearance, and a single ethernet cable connecting it all with no relay or fuse panel required. The BantamX platform's uLINK system allows expansion to 32 total channels if the build grows, and the 2-controller-port design supports a second controller option on the same module. Built to Order means it does not ship off a shelf — call ahead to confirm availability before placing the order.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYou own a 2023–2026 Ford F-250 or F-350 Super Duty with the factory sunglass holder in the upper console.\u003c\/li\u003e\n\u003cli\u003eYou want a factory-integrated touchscreen accessory controller rather than a traditional switch panel.\u003c\/li\u003e\n\u003cli\u003eYou need 8 independently controlled, 30-amp circuits with Bluetooth app programming.\u003c\/li\u003e\n\u003cli\u003eYou want built-in low-voltage cutoff protection and deep sleep mode.\u003c\/li\u003e\n\u003cli\u003eYou want the ability to expand to up to 32 channels through uLINK as your build grows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is Not For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYour vehicle is not a 2023–2026 Ford F-250 or F-350 Super Duty.\u003c\/li\u003e\n\u003cli\u003eYour truck's upper console does not have a factory sunglass holder in the location this kit replaces.\u003c\/li\u003e\n\u003cli\u003eYou need more than 8 circuits immediately without adding additional BantamX modules.\u003c\/li\u003e\n\u003cli\u003eYou plan to connect an aftermarket brake controller, high-amp solenoid, or high-amp relay to the same positive battery post as the BantamX.\u003c\/li\u003e\n\u003cli\u003eYou plan to cut, splice, or modify the supplied wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eCommon Questions\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs this product in stock?\u003c\/strong\u003e\u003cbr\u003eThis is a Built to Order product. Contact Obsidian Forged Auto Supply before ordering to confirm availability and lead time. Call or text 469-407-7538.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhere does the touchscreen mount?\u003c\/strong\u003e\u003cbr\u003eThe 3.5-inch digital touchscreen replaces the factory sunglass holder in the upper console of the 2023–2026 F-250\/F-350 Super Duty. Confirm your truck has this factory location before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow many accessories can this kit control?\u003c\/strong\u003e\u003cbr\u003eThe BantamX provides 8 circuits, each rated at 30 amps at 12.5 VDC, for 100A total. With uLINK, the system can expand to 32 total channels by linking additional BantamX modules (sold separately).\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan I control the system from my phone?\u003c\/strong\u003e\u003cbr\u003eYes. The BantamX has built-in sPODConnect Bluetooth. The system is programmable via the sPOD app on iOS and Android devices.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat programming options are available?\u003c\/strong\u003e\u003cbr\u003eOutput dimming, strobing, flashing, master-slave functions, memory, auto power-up, momentary settings, switch linking, and input control automation via factory wiring integration.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes installation require relays, fuses, or a wiring loom?\u003c\/strong\u003e\u003cbr\u003eNo. A single ethernet cable connects the BantamX unit to the touchscreen. No relays, wiring looms, or circuit fuses are required.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat voltage systems does this support?\u003c\/strong\u003e\u003cbr\u003eThe BantamX operates on 12 VDC or 24 VDC.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCan I run two controllers on the same BantamX?\u003c\/strong\u003e\u003cbr\u003eYes. The BantamX has 2 built-in controller ports, supporting 2 different controller options per system.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003esPOD provides a 5-year manufacturer warranty on this product.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eManufacturer Data Disclaimer\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eFitment, specification, included-component, and installation data for this kit are sourced from sPOD\/Baja Designs manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eRequired Legal, Warning, Fitment, and Return Notices\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Cancer and Reproductive Harm. See \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e Returns are accepted within 30 days of receipt. Merchandise must be returned unused, in original condition, with all printed materials and accessories enclosed. Products showing signs of installation or not in original condition may incur additional charges or may not be accepted. All returns require a Return Merchandise Authorization (RMA) number and proof of original purchase. To request an RMA, email \u003ca href=\"mailto:Return@bajadesigns.com\"\u003eReturn@bajadesigns.com\u003c\/a\u003e with your full name, invoice number, and part number. A 15% restocking fee applies after 30 days. Return shipping is the buyer's responsibility. Original shipping fees are non-refundable. Obsidian Forged Auto Supply strongly recommends insuring all return packages. We are not responsible for items lost or stolen in transit; liability is assumed once the return reaches the facility. Failure to follow the return process may result in delays or refusal of the returned package. These policies are subject to change without prior notice.\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":51449717129537,"sku":"870140","price":1079.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/870140.jpg?v=1772987639","url":"https:\/\/obsidianforgedautosupply.com\/products\/spod-bantamx-touchscreen-kit-870140-ford-f250-f350-super-duty-2023-2026","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}