{"product_id":"replacement-heavy-duty-heim-joint-right-hand-thread-3-4-inch-shank-5-8-inch-bore-for-utv-single-axiom-supply-215780","title":"Axiom Supply HD Heim Joint | 3\/4 in Shank x 5\/8 in Bore | Right-Hand Thread | Zinc Plated | UTV","description":"\u003ch2\u003eAxiom Heavy Duty Heim Joint | 3\/4\" Shank x 5\/8\" Bore | Right-Hand Thread | Zinc Plated | UTV Suspension \u0026amp; Steering\u003c\/h2\u003e\n\u003cp\u003eThe Axiom Heavy Duty Heim Joint (SKU: JMXR10-12T-F-XXVEZ) is a high-strength spherical rod end (heim joint) for UTV suspension and steering linkage applications requiring a 3\/4\" shank diameter, 5\/8\" bore, and right-hand thread. This is a reducing joint — the 3\/4\" shank threads into the rod end tube while the 5\/8\" bore accepts a 5\/8\" mounting bolt or pin. Used in custom fabrication and suspension builds where the tube thread is 3\/4\" but the mounting hardware is 5\/8\". Zinc-plated finish for corrosion resistance in mud, sand, rock, and trail environments. Right-hand thread — confirm your application requires right-hand thread before ordering. High-strength housing and ball. Sold individually.\u003c\/p\u003e\n\n\u003ch2\u003eApplication (OFAS Standard)\u003c\/h2\u003e\n\u003cp\u003eUniversal fit — compatible with any UTV suspension or steering linkage application requiring a 3\/4\" shank, 5\/8\" bore, right-hand thread heim joint. Confirm all three dimensions before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes NOT fit:\u003c\/strong\u003e Applications requiring left-hand thread — see JMXL10-12T-F-XXVEZ for 3\/4\" shank x 5\/8\" bore left-hand thread. Does not fit applications requiring a 3\/4\" bore — see JMXR12T-F1-XXVEZ for 3\/4\" x 3\/4\" right-hand thread. Does not fit applications requiring a 5\/8\" shank — see JMXR10T-F1 for 5\/8\" x 5\/8\" right-hand thread.\u003c\/p\u003e\n\n\u003ch2\u003eAxiom HD Heim Joint Selection Guide\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8\" Shank x 5\/8\" Bore — Right-Hand Thread:\u003c\/strong\u003e JMXR10T-F1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4\" Shank x 3\/4\" Bore — Right-Hand Thread (Zinc):\u003c\/strong\u003e JMXR12T-F1-XXVEZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4\" Shank x 3\/4\" Bore — Left-Hand Thread (Zinc):\u003c\/strong\u003e JMXL12T-F1-XXVEZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4\" Shank x 5\/8\" Bore — Left-Hand Thread (Zinc):\u003c\/strong\u003e JMXL10-12T-F-XXVEZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4\" Shank x 5\/8\" Bore — Right-Hand Thread (Zinc):\u003c\/strong\u003e JMXR10-12T-F-XXVEZ (this listing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e JMXR10-12T-F-XXVEZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Spherical rod end (heim joint) — reducing bore\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore Size:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e Right-hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated — corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e High-strength metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Single (sold individually)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e UTV suspension arms, steering linkage, long-travel suspension, custom fabrication with 3\/4\" tube thread and 5\/8\" mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSymptoms of a Worn Heim Joint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSteering wander or vague on-center feel\u003c\/li\u003e\n\u003cli\u003eClunking or knocking from suspension or steering linkage over rough terrain\u003c\/li\u003e\n\u003cli\u003eVisible play or slop in the joint when checked by hand\u003c\/li\u003e\n\u003cli\u003eUneven or accelerated tire wear\u003c\/li\u003e\n\u003cli\u003eVibration through the steering wheel or chassis at speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread direction confirmation required:\u003c\/strong\u003e Confirm the application requires right-hand thread before ordering. Right-hand and left-hand heim joints are not interchangeable — installing the wrong thread direction will not allow correct adjustment and can back out under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReducing bore confirmation:\u003c\/strong\u003e Confirm your mounting bolt or pin is 5\/8\" and your tube thread is 3\/4\" before ordering. If both shank and bore are 3\/4\", order JMXR12T-F1-XXVEZ instead. If you need left-hand thread with these same dimensions, order JMXL10-12T-F-XXVEZ.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJam nut required:\u003c\/strong\u003e Secure with a right-hand thread jam nut after adjustment. Do not operate without a properly torqued jam nut — the joint will back out under vibration and load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque specs:\u003c\/strong\u003e Torque heim joint shank and jam nut to manufacturer specification for your UTV suspension or steering system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection interval:\u003c\/strong\u003e Inspect for play, binding, or corrosion at regular service intervals. Replace immediately if play is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease fitting:\u003c\/strong\u003e If the joint includes a grease fitting, grease at installation and at regular service intervals per manufacturer recommendation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Warning\u003c\/h2\u003e\n\u003cp\u003eDo not install in a left-hand thread application — installing the wrong thread direction will not allow correct adjustment and can back out under load. Do not install if bore or shank dimensions do not match — incorrect dimensions cause joint failure under load. Do not operate without a properly torqued jam nut. Replace immediately if play is detected. Once installed, the unit is non-returnable.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is your tube thread size (3\/4\") and mounting bolt size (5\/8\"), and confirm thread direction is right-hand — need left-hand instead? See JMXL10-12T-F-XXVEZ.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Axiom Supply","offers":[{"title":"Zinc Plated","offer_id":51416619123009,"sku":"JMXR10-12T-F-XXVEZ","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/JMXR10-12T-F_0-XXVEZ.png?v=1771944763","url":"https:\/\/obsidianforgedautosupply.com\/products\/replacement-heavy-duty-heim-joint-right-hand-thread-3-4-inch-shank-5-8-inch-bore-for-utv-single-axiom-supply-215780","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}