{"product_id":"replacement-heavy-duty-heim-joint-right-hand-thread-3-4-inch-shank-3-4-inch-bore-for-utv-single-axiom-supply-215782","title":"Axiom Supply HD Heim Joint | 3\/4 in x 3\/4 in | Right-Hand Thread | Zinc Plated | UTV Suspension \u0026 Steering","description":"\u003ch2\u003eAxiom Heavy Duty Heim Joint | 3\/4\" x 3\/4\" | Right-Hand Thread | Zinc Plated | UTV Suspension \u0026amp; Steering\u003c\/h2\u003e\n\u003cp\u003eThe Axiom Heavy Duty Heim Joint (SKU: JMXR12T-F1-XXVEZ) is a high-strength spherical rod end (heim joint) for UTV suspension and steering linkage applications requiring a 3\/4\" shank diameter, 3\/4\" bore, and right-hand thread. Zinc-plated finish for corrosion resistance in mud, sand, rock, and trail environments. Heim joints allow precise multi-axis articulation at suspension and steering pivot points — worn or damaged joints introduce play that causes steering wander, vibration, and accelerated wear on surrounding components. High-strength housing and ball. Smooth, consistent pivoting under high-load and high-impact off-road conditions. Sold individually — order the quantity required for your application.\u003c\/p\u003e\n\n\u003ch2\u003eApplication (OFAS Standard)\u003c\/h2\u003e\n\u003cp\u003eUniversal fit — compatible with any UTV suspension or steering linkage application requiring a 3\/4\" x 3\/4\" right-hand thread heim joint. Confirm all three dimensions before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes NOT fit:\u003c\/strong\u003e Applications requiring left-hand thread — right-hand and left-hand heim joints are not interchangeable. Does not fit applications requiring a different shank diameter or bore size — see JMXR10T-F1 for 5\/8\" x 5\/8\" right-hand thread. Does not fit metric thread applications without confirming thread compatibility.\u003c\/p\u003e\n\n\u003ch2\u003eHeim Joint Size Guide\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8\" x 5\/8\" Right-Hand Thread:\u003c\/strong\u003e JMXR10T-F1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4\" x 3\/4\" Right-Hand Thread (Zinc Plated):\u003c\/strong\u003e JMXR12T-F1-XXVEZ (this listing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e JMXR12T-F1-XXVEZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Spherical rod end (heim joint)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore Size:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e Right-hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc plated — corrosion-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e High-strength metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Single (sold individually)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e UTV suspension arms, steering linkage, long-travel suspension, custom fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSymptoms of a Worn Heim Joint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSteering wander or vague on-center feel\u003c\/li\u003e\n\u003cli\u003eClunking or knocking from suspension or steering linkage over rough terrain\u003c\/li\u003e\n\u003cli\u003eVisible play or slop in the joint when checked by hand\u003c\/li\u003e\n\u003cli\u003eUneven or accelerated tire wear\u003c\/li\u003e\n\u003cli\u003eVibration through the steering wheel or chassis at speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread direction confirmation required:\u003c\/strong\u003e Confirm the application requires right-hand thread before ordering. Right-hand and left-hand heim joints are not interchangeable — installing the wrong thread direction will not allow correct adjustment and can back out under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension confirmation:\u003c\/strong\u003e Verify shank diameter (3\/4\"), bore size (3\/4\"), and thread pitch match your application before installation. Incorrect dimensions will not fit correctly and can cause joint failure under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJam nut required:\u003c\/strong\u003e Heim joints must be secured with a jam nut after adjustment. Do not operate the vehicle without a properly torqued jam nut — the joint will back out under vibration and load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque specs:\u003c\/strong\u003e Torque heim joint shank and jam nut to manufacturer specification for your UTV suspension or steering system (verify in UTV service manual or aftermarket suspension manufacturer spec sheet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection interval:\u003c\/strong\u003e Inspect heim joints for play, binding, or corrosion at regular service intervals. Off-road and high-impact applications accelerate wear — inspect more frequently than street applications. Replace immediately if play is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrease fitting:\u003c\/strong\u003e If the joint includes a grease fitting, grease at installation and at regular service intervals per manufacturer recommendation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Warning\u003c\/h2\u003e\n\u003cp\u003eDo not install without confirming thread direction is right-hand — a left-hand thread joint installed in a right-hand application will back out under load and cause loss of steering or suspension control. Do not operate without a properly torqued jam nut. Replace immediately if play is detected — a failed heim joint in a steering or suspension application can cause loss of vehicle control. Once installed, the unit is non-returnable.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat UTV make and model, which suspension or steering location, and confirm thread direction is right-hand and shank\/bore is 3\/4\" x 3\/4\" — need 5\/8\" instead? See JMXR10T-F1.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Axiom Supply","offers":[{"title":"Zinc Plated","offer_id":51416619024705,"sku":"JMXR12T-F1-XXVEZ","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/JMXR12T-F1_0-XXVEZ.png?v=1771944758","url":"https:\/\/obsidianforgedautosupply.com\/products\/replacement-heavy-duty-heim-joint-right-hand-thread-3-4-inch-shank-3-4-inch-bore-for-utv-single-axiom-supply-215782","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}