{"product_id":"deaver-mini-leaf-pack-silverado-sierra-1500-210-91170","title":"Deaver Mini Leaf Pack Set | 2019-2026 Chevrolet Silverado\/GMC Sierra 1500","description":"\u003ch2\u003eThe Obsidian Vision\u003c\/h2\u003e\u003cp\u003eThe factory bottom overload spring on the 2019–2026 Silverado and Sierra 1500 is a known ride quality liability — thick, harsh, and tuned for maximum load rather than daily driving comfort. The Deaver Mini Leaf Pack Set replaces it with a progressive overload spring that rides better empty, carries load progressively, and delivers 1 to 3 inches of adjustable rear lift when one or both of the factory spacer blocks are removed. Sold as a set with new center pins included, this is a direct bolt-on to the stock spring pack — no fabrication, no guesswork, 2-hour DIY install, made in the USA.\u003c\/p\u003e\u003ch3\u003eConcierge Fitment Guarantee\u003c\/h3\u003e\u003cp\u003eEvery order is manually reviewed by our technicians to ensure 100% compatibility with your build before we ship.\u003c\/p\u003e\u003ch3\u003eEngineering Breakdown\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces\u003c\/strong\u003e the harsh factory bottom overload spring with a progressive-rate Deaver mini leaf pack that softens the initial spring rate for improved empty-truck ride quality while maintaining load-carrying capacity — a direct upgrade over the OEM overload that requires no modification to the stock spring pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreases\u003c\/strong\u003e rear ride height 1 to 3 inches adjustably by removing one or both factory spacer blocks — allowing the owner to dial in rear stance without a dedicated lift block kit, using the same Deaver mini pack across multiple lift height configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivers\u003c\/strong\u003e a progressive spring rate that builds load resistance as deflection increases, eliminating the abrupt harshness of the OEM overload under light loads while preserving the load floor needed for towing and hauling on the T1 Silverado\/Sierra 1500 platform.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Deaver Mini Leaf Pack Set fastens directly to the stock spring pack using new center pins included in the kit — no drilling, no re-arching, no modification to the OEM leaf pack required. Compatibility is limited to the stock spring pack; aftermarket replacement spring packs may not be compatible. The progressive spring rate design uses thinner individual leaf material at a higher leaf count than the OEM overload, producing a compliant initial rate that stiffens progressively under load. At 64 lbs, this kit ships standard parcel — no freight required.\u003c\/p\u003e\u003ch3\u003eAudit Table\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eIncluded Components\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e210-91170\u003c\/td\u003e\n\u003ctd\u003eProgressive Mini Overload Leaf Pack — 1–3\" Adjustable Rear Lift; 2019–2026 Silverado\/Sierra 1500 2WD\/4WD; Stock Spring Pack Required\u003c\/td\u003e\n\u003ctd\u003eHigh-quality progressive-rate spring steel; USA-manufactured\u003c\/td\u003e\n\u003ctd\u003e64 lbs\u003c\/td\u003e\n\u003ctd\u003eDeaver mini leaf pack set (pair); new center pins\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVerified Fitment (OFAS Standard)\u003c\/h3\u003e\u003cp\u003e✅ \u003cstrong\u003eCONFIRMED — Chevrolet Silverado 1500 (T1, 2019–2026):\u003c\/strong\u003e\u003cbr\u003e2019–2026 Chevrolet Silverado 1500 Base, Custom, Custom Trail Boss, RST, LT, LT Trail Boss, LTZ, High Country 2WD\/4WD\u003cbr\u003e2022–2026 Chevrolet Silverado 1500 ZR2 2WD\/4WD\u003c\/p\u003e\u003cp\u003e✅ \u003cstrong\u003eCONFIRMED — GMC Sierra 1500 (T1, 2019–2026):\u003c\/strong\u003e\u003cbr\u003e2019–2026 GMC Sierra 1500 Base, SLE, SLT, Elevation, Denali, AT4 2WD\/4WD\u003cbr\u003e2022–2026 GMC Sierra 1500 Pro, AT4X, Denali Ultimate 2WD\/4WD\u003c\/p\u003e\u003cp\u003e❌ \u003cstrong\u003eREQUIREMENTS \u0026amp; CRITICAL NOTICES:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e⚠️ STOCK SPRING PACK REQUIRED:\u003c\/strong\u003e These mini packs are only compatible with the factory OEM spring pack. Aftermarket replacement spring packs are not compatible.\u003cbr\u003e\u003cstrong\u003e⚠️ T1 GENERATION ONLY (2019–2026):\u003c\/strong\u003e Engineered for the T1 generation Silverado\/Sierra 1500 only. Not compatible with the previous K2 generation (2014–2018) or the classic body style.\u003cbr\u003eRear alignment check recommended after installation — verify rear axle pinion angle is within GM specification for the installed lift height before towing.\u003cbr\u003eRe-torque center pins and U-bolts after the first 500 miles post-installation.\u003c\/p\u003e\u003ch3\u003eInstallation \u0026amp; Technical Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eEstimated Install Time:\u003c\/strong\u003e 2-hour DIY install — with a floor jack, jack stands, basic hand tools, and a torque wrench.\u003cbr\u003e\u003cstrong\u003eLift Height Adjustment:\u003c\/strong\u003e Remove one spacer block for approximately 1–2 inches of rear lift; remove both spacer blocks for approximately 2–3 inches of rear lift. Final ride height will vary based on payload and individual vehicle spring pack condition.\u003cbr\u003e\u003cstrong\u003eCenter Pin Torque:\u003c\/strong\u003e Torque new center pins to Deaver's specification included with the kit. Do not reuse OEM center pins.\u003cbr\u003e\u003cstrong\u003eRe-Torque Interval:\u003c\/strong\u003e Re-torque all leaf spring fasteners after the first 500 miles of driving post-installation.\u003cbr\u003e\u003cstrong\u003eRear Pinion Angle:\u003c\/strong\u003e Verify rear differential pinion angle is within GM specification after installation, particularly if towing at or near rated capacity.\u003c\/p\u003e\u003ch3\u003eWheel \u0026amp; Tire Fitment\u003c\/h3\u003e\u003cp\u003eThis mini leaf pack affects rear ride height only and does not alter front suspension geometry or wheel\/tire clearance. Confirm existing wheel offset and tire clearance with any front lift components installed on your specific build. Contact the OFAS team to verify rear fender clearance for oversized tire fitment at the installed rear lift height.\u003c\/p\u003e\u003cblockquote\u003e\u003cp\u003eOur team is standing by to verify your specific spacer block configuration and rear lift height target for your T1 Silverado or Sierra 1500 build. Purchase with confidence; we review every build.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Cognito Motorsports Truck","offers":[{"title":"Default Title","offer_id":51705398985025,"sku":"210-91170","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/210-91170_0-GFGQ.jpg?v=1778201774","url":"https:\/\/obsidianforgedautosupply.com\/products\/deaver-mini-leaf-pack-silverado-sierra-1500-210-91170","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}