{"product_id":"cognito-front-fender-liner-tie-back-kit-silverado-sierra-2500hd-3500hd-2020-2025-110-91193","title":"Cognito Front Fender Liner Tie Back Kit | 2020-2025 Silverado\/Sierra 2500HD\/3500HD","description":"\u003ch2\u003eThe Obsidian Vision\u003c\/h2\u003e\u003cp\u003eFitting 35- or 37-inch tires on a leveled 2020–2025 Silverado or Sierra 2500HD\/3500HD is a wheel and tire decision that the factory front fender liner bracket geometry was not designed to accommodate — the lower rear portion of the front wheel well fender liner sits in a position that contacts larger tires and offset wheels before the suspension reaches full compression. The Cognito Front Fender Liner Tie Back Kit resolves that clearance deficit in 30 minutes: new mild steel brackets that bolt on after removing the stock fender liner brackets, tying the lower rear portion of the front wheel well fender liner back further to clear larger tires and offset wheels. No trimming required if the factory mud guards are removed. If the factory mud guards are retained, they must be trimmed as shown in the included instructions. Made in the USA.\u003c\/p\u003e\u003ch3\u003eConcierge Fitment Guarantee\u003c\/h3\u003e\u003cp\u003eEvery order is manually reviewed by our technicians to ensure 100% compatibility with your build before we ship.\u003c\/p\u003e\u003ch3\u003eEngineering Breakdown\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelocates\u003c\/strong\u003e the lower rear portion of the front wheel well fender liner rearward by replacing the factory fender liner brackets with new Cognito brackets that mount at the same OEM bolt locations but position the liner further back — creating the additional clearance between the fender liner and the tire sidewall that larger tires and offset wheels require at full suspension compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstalls\u003c\/strong\u003e in 30 minutes with no trimming required when the factory mud guards are removed — a direct bolt-on replacement for the stock fender liner brackets using all included hardware, with no drilling, cutting, or modification to the fender liner or wheel well required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnables\u003c\/strong\u003e the verified tire and wheel fitment combinations listed below on 3-inch leveled 2020–2025 Silverado\/Sierra 2500HD\/3500HD trucks, providing the fender liner clearance required to run larger tires without fender liner contact at full suspension compression.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe factory front fender liner bracket positions the lower rear portion of the fender liner at a location that is appropriate for the stock tire size and offset range but insufficient for the larger tire diameters and more aggressive offsets that leveled and lifted T1 2500HD\/3500HD owners run. The Cognito tie back brackets use the factory mounting points to reposition the liner rearward, creating the clearance margin required for the verified tire and wheel combinations below. The brackets are constructed from mild steel with a semi-gloss black powder coat finish for corrosion resistance. All installation hardware is included. Made in the USA.\u003c\/p\u003e\u003ch3\u003eAudit Table\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eIncluded Components\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e110-91193\u003c\/td\u003e\n\u003ctd\u003eFront Fender Liner Tie Back Kit — 2020–2025 Silverado\/Sierra 2500HD\/3500HD 2WD\/4WD\u003c\/td\u003e\n\u003ctd\u003eMild steel; semi-gloss black powder coat; USA-manufactured\u003c\/td\u003e\n\u003ctd\u003e2 lbs\u003c\/td\u003e\n\u003ctd\u003eCognito fender liner tie back brackets (pair), all OEM-location mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVerified Fitment (OFAS Standard)\u003c\/h3\u003e\u003cp\u003e✅ \u003cstrong\u003eCONFIRMED — Chevrolet Silverado 2500HD:\u003c\/strong\u003e\u003cbr\u003e2020–2025 Chevrolet Silverado 2500HD Base, Custom, WT, LT, LTZ, High Country 2WD\/4WD\u003c\/p\u003e\u003cp\u003e✅ \u003cstrong\u003eCONFIRMED — Chevrolet Silverado 3500HD:\u003c\/strong\u003e\u003cbr\u003e2020–2025 Chevrolet Silverado 3500HD Base, WT, LT, LTZ, High Country 2WD\/4WD SRW \u0026amp; DRW\u003c\/p\u003e\u003cp\u003e✅ \u003cstrong\u003eCONFIRMED — GMC Sierra 2500HD:\u003c\/strong\u003e\u003cbr\u003e2020–2022 GMC Sierra 2500HD Base 2WD\/4WD\u003cbr\u003e2020–2025 GMC Sierra 2500HD SLE, SLT, AT4, Denali 2WD\/4WD\u003cbr\u003e2023–2025 GMC Sierra 2500HD Pro 2WD\/4WD\u003cbr\u003e2024–2025 GMC Sierra 2500HD AT4X, Denali Ultimate 2WD\/4WD\u003c\/p\u003e\u003cp\u003e✅ \u003cstrong\u003eCONFIRMED — GMC Sierra 3500HD:\u003c\/strong\u003e\u003cbr\u003e2020–2022 GMC Sierra 3500HD Base 2WD\/4WD SRW \u0026amp; DRW\u003cbr\u003e2020–2025 GMC Sierra 3500HD SLE, SLT, AT4, Denali 2WD\/4WD SRW \u0026amp; DRW\u003cbr\u003e2023–2025 GMC Sierra 3500HD Pro 2WD\/4WD SRW \u0026amp; DRW\u003cbr\u003e2024–2025 GMC Sierra 3500HD Denali Ultimate 2WD\/4WD SRW \u0026amp; DRW\u003c\/p\u003e\u003cp\u003e❌ \u003cstrong\u003eREQUIREMENTS \u0026amp; CRITICAL NOTICES:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e⚠️ FACTORY MUD GUARDS — TRIMMING REQUIRED:\u003c\/strong\u003e If the factory mud guards are retained, they must be trimmed as shown in the included instructions before installation. No trimming is required if the factory mud guards are removed.\u003cbr\u003eDesigned for use with leveled and lifted applications — tire clearance results are verified on 3-inch leveled trucks. Results at other lift heights may vary; contact the OFAS team to confirm clearance for your specific lift height and tire\/wheel combination.\u003c\/p\u003e\u003ch3\u003eInstallation \u0026amp; Technical Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eEstimated Install Time:\u003c\/strong\u003e 30-Minute DIY Install (basic hand tools only — no lift required)\u003cbr\u003e\u003cstrong\u003eMud Guard Check:\u003c\/strong\u003e Before installation, determine whether the factory mud guards will be retained or removed. If retained, trim the mud guards as shown in the included instruction sheet before installing the tie back brackets. If removed, no trimming is required.\u003cbr\u003e\u003cstrong\u003eInstall Sequence:\u003c\/strong\u003e Remove the factory fender liner brackets at the lower rear of the front wheel well. Install the Cognito tie back brackets at the same OEM mounting locations using the included hardware. Verify the fender liner is correctly positioned and secured before driving.\u003cbr\u003e\u003cstrong\u003eTorque Specifications:\u003c\/strong\u003e Torque all mounting hardware to the specification in Cognito's included instruction sheet.\u003c\/p\u003e\u003ch3\u003eWheel \u0026amp; Tire Fitment\u003c\/h3\u003e\u003cp\u003eVerified tire and wheel fitment on 3-inch leveled 2020–2025 Silverado\/Sierra 2500HD\/3500HD trucks with this tie back kit installed:\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e35x12.5\" tire on 9\" wide wheel:\u003c\/strong\u003e -18mm to +18mm offset — confirmed clearance\u003cbr\u003e\u003cstrong\u003e35x12.5\" tire on 10\" wide wheel:\u003c\/strong\u003e 0mm to +10mm offset — confirmed clearance\u003cbr\u003e\u003cstrong\u003e37x12.5\" tire on 9\" wide wheel:\u003c\/strong\u003e +18mm offset — confirmed clearance\u003c\/p\u003e\u003cp\u003eContact the OFAS team to verify clearance for tire and wheel combinations not listed above, or for lift heights other than 3 inches.\u003c\/p\u003e\u003cblockquote\u003e\u003cp\u003eOur team is standing by to verify your specific tire size, wheel width, and offset combination with this tie back kit at your installed lift height. Purchase with confidence; we review every build.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Cognito Motorsports Truck","offers":[{"title":"Default Title","offer_id":51705401147713,"sku":"110-91193","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/110-91193_0-GFGQ.jpg?v=1778201882","url":"https:\/\/obsidianforgedautosupply.com\/products\/cognito-front-fender-liner-tie-back-kit-silverado-sierra-2500hd-3500hd-2020-2025-110-91193","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}