{"product_id":"cmm-a-pillar-1-inch-ball-mount-86-0218-jeep-jl-jt-2024-2026","title":"Carolina Metal Masters A-Pillar 1-Inch Ball Mount Solution — Jeep Wrangler JL \/ Gladiator JT SKU: 86-0218","description":"\u003cp dir=\"ltr\"\u003eA year-specific, no-drill A-pillar mounting solution for the 2024–2026 Jeep Wrangler JL and Gladiator JT. The 3D-machined 6061 aluminum insert replaces the factory A-pillar cover panel and accepts a 1-inch ball mount for electronic accessories including sPOD controllers, GPS units, cell phones, and similar devices. Installs in any of the four A-pillar positions — above or below the factory handle on either side — using the existing factory mounting hole.\u003c\/p\u003e\n\u003chr\u003e\n\u003cblockquote\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e Fits 2024–2026 Jeep Wrangler JL and Gladiator JT, front A-pillar positions only. Not compatible with rear positions. This kit includes one ball mount and one machined insert — one unit covers one mounting position. If you need multiple positions, order accordingly.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequired separately:\u003c\/strong\u003e RAM Mount Double Socket Arm for 1-inch ball (PN 860245) and\/or 1\/4-20 Female Threaded Hole with 1-inch ball adapter (PN 200244) for sPOD HD or Touchscreen mounting — both sold separately. Your electronic device and mounting hardware are not included.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch4 dir=\"ltr\"\u003eVerified Fitment\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eMake\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eModel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler JL\u003c\/td\u003e\n\u003ctd\u003e2024–2026\u003c\/td\u003e\n\u003ctd\u003eFront A-pillar only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGladiator JT\u003c\/td\u003e\n\u003ctd\u003e2024–2026\u003c\/td\u003e\n\u003ctd\u003eFront A-pillar only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eThis product is year-specific for 2024–2026 Wrangler JL and Gladiator JT models. It is not compatible with pre-2024 JL or JT builds — the machined insert is designed for the 2024–2026 A-pillar geometry.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eComponent Specifications\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCarolina Metal Masters (CMM Offroad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e86-0218\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsert material\u003c\/td\u003e\n\u003ctd\u003e6061 Aluminum, 3D machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsert finish\u003c\/td\u003e\n\u003ctd\u003eAnodized black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall mount size\u003c\/td\u003e\n\u003ctd\u003e1-inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible device types\u003c\/td\u003e\n\u003ctd\u003esPOD Mini6, HD, and Touchscreen controllers; cell phones; GPS units; similar electronic accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting positions\u003c\/td\u003e\n\u003ctd\u003eAny of the 4 A-pillar positions (above or below factory handle, driver or passenger side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocation restriction\u003c\/td\u003e\n\u003ctd\u003eFront A-pillar only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation method\u003c\/td\u003e\n\u003ctd\u003eReplaces factory cover panel; one bolt into existing factory hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling required\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting required\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eWhat Is and Is NOT Included\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e(1) 3D machined 6061 aluminum base insert, anodized black\u003c\/li\u003e\n\u003cli\u003e(1) 1-inch ball mount\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eRAM Mount Double Socket Arm for 1-inch ball — PN 860245 (sold separately)\u003c\/li\u003e\n\u003cli\u003e1\/4-20 Female Threaded Hole with 1-inch ball adapter — PN 200244 (sold separately; for sPOD HD or Touchscreen rear-mounting)\u003c\/li\u003e\n\u003cli\u003eElectronic device (sPOD controller, GPS, phone, etc.)\u003c\/li\u003e\n\u003cli\u003eAdditional CMM inserts (one unit covers one position; order additional units for multiple positions)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eCritical Compatibility\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYear-specific fitment:\u003c\/strong\u003e Designed for 2024–2026 Jeep Wrangler JL and Gladiator JT only. Not compatible with pre-2024 JL or JT A-pillar cover geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront A-pillar only:\u003c\/strong\u003e This product fits front A-pillar positions only. Rear installation is not supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour available positions:\u003c\/strong\u003e Can be installed in any of the four A-pillar locations — above or below the factory handle on the driver or passenger side. One unit covers one position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall mount size:\u003c\/strong\u003e 1-inch ball. Confirm your device mount or RAM arm accepts a 1-inch ball before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003esPOD HD and Touchscreen:\u003c\/strong\u003e A 1\/4-20 Female Threaded Hole with 1-inch ball adapter (PN 200244) is available separately to connect the sPOD HD or Touchscreen to this mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eInstallation requires no drilling or cutting. Remove the existing factory A-pillar cover panel, seat the CMM machined insert in its place, and secure it using one bolt into the existing factory hole. No professional installation is required for this product.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThe Obsidian Take\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe 86-0218 solves the A-pillar mounting problem on 2024–2026 Wrangler JL and Gladiator JT builds cleanly — 3D-machined 6061 aluminum, anodized black, no drilling, no cutting, one factory bolt. It pairs directly with sPOD Mini6, HD, and Touchscreen controllers and accepts any 1-inch ball mount accessory. One unit covers one position; the four available A-pillar locations give you flexibility on driver-side or passenger-side placement, above or below the factory handle. The RAM Mount Double Socket Arm (PN 860245) and sPOD HD\/Touchscreen adapter (PN 200244) are the two most common add-ons and are sold separately.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYou own a 2024–2026 Jeep Wrangler JL or Gladiator JT.\u003c\/li\u003e\n\u003cli\u003eYou want a no-drill, no-cut front A-pillar mount for an electronic accessory at the factory A-pillar location.\u003c\/li\u003e\n\u003cli\u003eYou are running an sPOD Mini6, HD, or Touchscreen controller and want a clean, factory-position mounting point.\u003c\/li\u003e\n\u003cli\u003eYou want to use a 1-inch ball mount system for a GPS, phone, or similar device.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is Not For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYour Jeep Wrangler JL or Gladiator JT is not a 2024–2026 model.\u003c\/li\u003e\n\u003cli\u003eYou need a rear-position or non-A-pillar mount.\u003c\/li\u003e\n\u003cli\u003eYour device mount is not compatible with a 1-inch ball.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eProduct Family Reference\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible add-ons (sold separately):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePart Number\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePN 860245\u003c\/td\u003e\n\u003ctd\u003eRAM Mount Double Socket Arm for 1-inch ball — socket at both ends, accommodates 1-inch balls, adjustable to any viewing angle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePN 200244\u003c\/td\u003e\n\u003ctd\u003e1\/4-20 Female Threaded Hole with 1-inch ball — attaches to the back of sPOD HD or Touchscreen for additional mounting options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eCommon Questions\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this fit pre-2024 Wrangler JL or Gladiator JT models?\u003c\/strong\u003e\u003cbr\u003eNo. This insert is machined specifically for the 2024–2026 A-pillar geometry and is not compatible with earlier JL or JT builds.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow many positions can I use this in?\u003c\/strong\u003e\u003cbr\u003eThere are four available A-pillar positions: above the factory handle (driver side), below the factory handle (driver side), above the factory handle (passenger side), and below the factory handle (passenger side). One unit covers one position. Order additional units for multiple positions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs any drilling or cutting required?\u003c\/strong\u003e\u003cbr\u003eNo. The insert replaces the factory cover panel and secures with one bolt into the existing factory hole.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat if I want to mount my sPOD HD or Touchscreen to this?\u003c\/strong\u003e\u003cbr\u003ePN 200244 (1\/4-20 Female Threaded Hole with 1-inch ball) attaches to the back of the sPOD HD or Touchscreen panel and connects to the 1-inch ball on this mount. Sold separately.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDo I need the RAM Double Socket Arm?\u003c\/strong\u003e\u003cbr\u003ePN 860245 (RAM Mount Double Socket Arm for 1-inch ball) is needed to extend or articulate the device away from the A-pillar. It is sold separately and is not required for all setups — confirm your device mounting requirements before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat devices work with this mount?\u003c\/strong\u003e\u003cbr\u003eAny device or mount system compatible with a 1-inch ball, including sPOD Mini6, HD, and Touchscreen controllers, cell phones, and GPS units.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eManufacturer Data Disclaimer\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eFitment, specification, included-component, and compatibility data for this product are sourced from sPOD product documentation for this CMM Offroad SKU and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eRequired Legal, Warning, Fitment, and Return Notices\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Cancer and Reproductive Harm. See \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e Returns are accepted within 30 days of receipt. Merchandise must be returned unused, in original condition, with all printed materials and accessories enclosed. Products showing signs of installation or not in original condition may incur additional charges or may not be accepted. All returns require a Return Merchandise Authorization (RMA) number and proof of original purchase. To request an RMA, email \u003ca href=\"mailto:Return@bajadesigns.com\"\u003eReturn@bajadesigns.com\u003c\/a\u003e with your full name, invoice number, and part number. A 15% restocking fee applies after 30 days. Return shipping is the buyer's responsibility. Original shipping fees are non-refundable. Obsidian Forged Auto Supply strongly recommends insuring all return packages. We are not responsible for items lost or stolen in transit; liability is assumed once the return reaches the facility. Failure to follow the return process may result in delays or refusal of the returned package. These policies are subject to change without prior notice.\u003c\/p\u003e","brand":"sPOD","offers":[{"title":"Default Title","offer_id":51449717162305,"sku":"86-0218","price":112.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/86-0218-GNJV.jpg?v=1772852835","url":"https:\/\/obsidianforgedautosupply.com\/products\/cmm-a-pillar-1-inch-ball-mount-86-0218-jeep-jl-jt-2024-2026","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}