{"product_id":"clayton-track-bar-giiro-bushing-housing-cor-2300106","title":"Clayton Off Road Steel Track Bar GIIRO Bushing Housing 2.000 OD x 1.625 ID x 1.250 Wide","description":"\u003ch3\u003eIs This for You?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're building or repairing a Clayton Off Road track bar that uses a GIIRO bushing and need a replacement or additional steel housing to press the bushing into.\u003c\/strong\u003e This is the steel outer housing that the GIIRO bushing seats inside at the track bar mounting position — not the bushing itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need the housing to match the GIIRO bushing OD of 1.625\" and fit into a track bar end or bracket with a 2.000\" bore.\u003c\/strong\u003e Confirm your track bar housing bore and bushing OD before ordering — dimensional fit is the only compatibility check for this component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're fabricating a custom track bar to Clayton Off Road's GIIRO bushing system dimensions.\u003c\/strong\u003e This housing gives you the correct steel shell to build around the GIIRO dual-durometer bushing at the track bar end position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Result\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel construction\u003c\/strong\u003e — machined steel outer housing provides the structural shell for the GIIRO bushing at the track bar mounting position; resists deformation under the lateral loads that the track bar manages during suspension travel and cornering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision dimensions: 2.000\" OD \/ 1.625\" ID \/ 1.250\" width\u003c\/strong\u003e — machined to accept the GIIRO bushing at the ID and press or weld into the track bar end or bracket at the OD. Smaller profile than the lower control arm housing (COR-2300107) — sized for the track bar application specifically.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for the GIIRO dual-durometer bushing system\u003c\/strong\u003e — the 1.625\" ID is sized to accept the GIIRO bushing used in Clayton Off Road's track bar lineup; self-lubricating, self-centering, maintenance-free bushing operation once assembled.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe COR-2300106 is Clayton Off Road's steel track bar housing for the GIIRO bushing system. The GIIRO bushing is a dual-durometer design — a harder outer ring for structural load transfer and a softer inner element for vibration isolation and articulation compliance. This steel housing is the outer shell that the GIIRO bushing presses into; the housing is then pressed or welded into the track bar end or bracket at the track bar mounting position. The track bar housing (COR-2300106) is dimensionally distinct from the lower control arm housing (COR-2300107) — the track bar housing is smaller (2.000\" OD vs 2.750\" OD) to match the track bar end bore. Dimensional specs: 2.000\" OD (housing outer diameter, interfaces with track bar bore), 1.625\" ID (bushing seat, accepts GIIRO bushing OD), 1.250\" width (housing depth). Verify all three dimensions against your track bar design before ordering. This is a replacement and fabrication component; it is not a complete bushing assembly.\u003c\/p\u003e\u003ch3\u003eAudit Table\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCOR-2300106\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eSteel track bar GIIRO bushing housing (housing only — not complete bushing assembly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOD (Housing Outer Diameter)\u003c\/td\u003e\n\u003ctd\u003e2.000\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eID (Bushing Seat)\u003c\/td\u003e\n\u003ctd\u003e1.625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e1.250\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushing System\u003c\/td\u003e\n\u003ctd\u003eGIIRO dual-durometer — bushing sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTrack bar end position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower Control Arm Housing\u003c\/td\u003e\n\u003ctd\u003eCOR-2300107 (2.750\" OD \/ 2.125\" ID \/ 1.750\" wide — different dimensions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e4\" L x 4\" W x 4\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVerified Fitment (OFAS Standard)\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ Clayton Off Road track bars using GIIRO bushing system with 2.000\" housing bore\u003c\/li\u003e\n\u003cli\u003e✅ Custom fabricated track bars designed to accept a 2.000\" OD housing and 1.625\" ID GIIRO bushing\u003c\/li\u003e\n\u003cli\u003e✅ Replacement housing for worn or damaged track bar GIIRO bushing housings matching these dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDoes NOT Fit:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e❌ Lower control arm GIIRO bushing position — different housing dimensions (2.750\" OD); see COR-2300107\u003c\/li\u003e\n\u003cli\u003e❌ Track bar bores other than 2.000\" — housing OD must match the bore it presses or welds into\u003c\/li\u003e\n\u003cli\u003e❌ Non-GIIRO bushing systems — the 1.625\" ID is sized for the GIIRO bushing OD specifically\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; Fabrication Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVerify all three dimensions (2.000\" OD, 1.625\" ID, 1.250\" width) match your track bar design before pressing or welding the housing in place.\u003c\/li\u003e\n\u003cli\u003ePress housing into track bar bore using a hydraulic press — ensure housing is square to the bore axis before pressing fully seated.\u003c\/li\u003e\n\u003cli\u003eIf welding the housing into a fabricated track bar end, verify square alignment before tacking, then fully weld after confirming position.\u003c\/li\u003e\n\u003cli\u003ePress GIIRO bushing into housing ID after housing is installed and any welds have cooled — heat distortion from welding can affect the 1.625\" ID dimension.\u003c\/li\u003e\n\u003cli\u003eDo not use a hammer directly on the housing face during installation — use a press plate or driver sized to the housing OD to avoid deforming the housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalifornia Prop 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. See P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWheel \u0026amp; Tire Fitment\u003c\/h3\u003e\u003cp\u003eNot applicable — this is a fabrication and replacement component. Fitment is determined by dimensional compatibility with your track bar design, not vehicle wheel or tire selection.\u003c\/p\u003e\u003cblockquote\u003e\n\u003cstrong\u003eEngineering Question:\u003c\/strong\u003e What are the housing bore dimensions on your track bar end, and are you using the GIIRO bushing system? Confirm the track bar bore accepts a 2.000\" OD housing and that your GIIRO bushing OD is 1.625\" before ordering. This is the housing only — the GIIRO bushing is sold separately. If you need the lower control arm housing, see COR-2300107 (2.750\" OD).\u003c\/blockquote\u003e","brand":"Clayton Off Road","offers":[{"title":"Default Title","offer_id":51651323920705,"sku":"COR-2300106","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/COR-2300106-COR.jpg?v=1776528171","url":"https:\/\/obsidianforgedautosupply.com\/products\/clayton-track-bar-giiro-bushing-housing-cor-2300106","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}