{"product_id":"clayton-standard-tube-insert-1x14-rh-1-5-dom-tubing-cor-2300201","title":"Clayton Off Road Standard CNC Tube Insert 1\"x14 RH for 1.5\" .156 Wall DOM Round Tubing","description":"\u003ch3\u003eIs This for You?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're building or repairing a control arm or suspension link using 1.5\" .156 wall DOM round tubing and need a 1\"x14 right-hand threaded insert.\u003c\/strong\u003e This is the Standard tier insert machined for DOM round tube — not square tubing. Confirm your tube type before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need right-hand thread and understand that left-hand thread is not available in this Standard series.\u003c\/strong\u003e LH thread is not offered for this DOM tube size — if you need LH thread in 1\"x14, see the Premium square tube series (COR-2300222 LH, 1.5\" square tubing).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a cost-effective CNC-machined insert with Grade 8 Hi-nut construction for a structural suspension fabrication application.\u003c\/strong\u003e The Standard series uses Grade 8 Hi-nuts machined to spec — a step below the Premium series but built for structural use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Result\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined for precise press fit into 1.5\" .156 wall DOM round tubing\u003c\/strong\u003e — machined to the ID of this specific tube size; no filing or gap-filling required before pressing in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\"x14 right-hand thread, Grade 8 Hi-nut construction\u003c\/strong\u003e — machined from Grade 8 Hi-nuts for structural thread strength; matches standard 1\"x14 RH rod ends and adjusters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-fit installation, weld to finish\u003c\/strong\u003e — press in with a hydraulic ram or 5 lb sledge, verify square alignment, then fully weld the insert to the tube for a permanent, structural connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe COR-2300201 is Clayton Off Road's Standard CNC-machined tube insert for 1.5\" .156 wall DOM round tubing, threaded 1\"x14 right-hand. This is the Standard tier in Clayton's tube insert lineup — machined from Grade 8 Hi-nuts for structural thread strength, CNC-machined for a precise press fit into the DOM tube ID. \u003cstrong\u003eLeft-hand thread is not available in this Standard DOM series — RH only.\u003c\/strong\u003e If you need LH thread in 1\"x14, the Premium series offers both LH (COR-2300222) and RH (COR-2300212) in 1.5\"x1.5\" 1\/8\" wall square tubing. Note that the Premium series is for square tubing and this Standard insert is for round DOM tubing — the tube geometry is different and the inserts are not interchangeable. The CNC machining ensures a precise press fit into the DOM tube ID. Press in with a hydraulic ram or 5 lb sledge, verify square, then fully weld.\u003c\/p\u003e\u003ch3\u003eAudit Table\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCOR-2300201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTier\u003c\/td\u003e\n\u003ctd\u003eStandard (vs Premium COR-2300212\/COR-2300222)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Spec\u003c\/td\u003e\n\u003ctd\u003e1\"x14 Right-Hand (RH) — RH ONLY, no LH available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Tubing\u003c\/td\u003e\n\u003ctd\u003e1.5\" DOM round tubing, .156\" wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Type\u003c\/td\u003e\n\u003ctd\u003eRound DOM — NOT square tubing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNut Material\u003c\/td\u003e\n\u003ctd\u003eGrade 8 Hi-nut, CNC machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit Type\u003c\/td\u003e\n\u003ctd\u003eCNC-machined press fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Method\u003c\/td\u003e\n\u003ctd\u003eHydraulic ram or 5 lb sledge hammer; fully weld after pressing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLH Availability\u003c\/td\u003e\n\u003ctd\u003eNot available in Standard DOM series — see Premium square tube series for LH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e4\" L x 4\" W x 4\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVerified Fitment (OFAS Standard)\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ 1.5\" DOM round tubing — .156\" wall thickness only\u003c\/li\u003e\n\u003cli\u003e✅ Any control arm or suspension link fabricated from 1.5\" .156 wall DOM round tube\u003c\/li\u003e\n\u003cli\u003e✅ 1\"x14 right-hand threaded rod ends and adjusters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDoes NOT Fit:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e❌ 1.5\"x1.5\" square tubing — different tube ID geometry; see COR-2300212 (RH) or COR-2300222 (LH) for square tube\u003c\/li\u003e\n\u003cli\u003e❌ 1.5\" DOM tubing with wall thickness other than .156\" — tube ID will differ and press fit will not be correct\u003c\/li\u003e\n\u003cli\u003e❌ 1\"x14 left-hand (LH) applications — LH is not available in this Standard DOM series\u003c\/li\u003e\n\u003cli\u003e❌ 2\" DOM or square tubing — different tube ID; see COR-2300213 for 2\" square tube RH insert\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; Fabrication Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfirm tube type and wall thickness before pressing — this insert is machined for 1.5\" .156 wall DOM \u003cstrong\u003eround\u003c\/strong\u003e tubing specifically. It will not fit square tubing of the same nominal size.\u003c\/li\u003e\n\u003cli\u003ePress insert into tube using a hydraulic ram or 5 lb sledge hammer — drive evenly to avoid cocking the insert during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify the insert is square to the tube axis before welding\u003c\/strong\u003e — use a square or straight edge to confirm alignment. A cocked insert will cause thread misalignment and binding at the rod end under load.\u003c\/li\u003e\n\u003cli\u003eFully weld the insert to the tube after confirming square — do not rely on press fit alone for structural use.\u003c\/li\u003e\n\u003cli\u003eAllow weld to cool fully before threading in rod end or adjuster — heat distortion can affect thread engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalifornia Prop 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. See P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWheel \u0026amp; Tire Fitment\u003c\/h3\u003e\u003cp\u003eNot applicable — this is a fabrication component. Fitment is determined by tube size, tube type, and thread spec, not vehicle wheel or tire selection.\u003c\/p\u003e\u003cblockquote\u003e\n\u003cstrong\u003eEngineering Question:\u003c\/strong\u003e Are you working with 1.5\" .156 wall DOM \u003cstrong\u003eround\u003c\/strong\u003e tubing, and do you need right-hand thread? Left-hand thread is not available in this Standard DOM series — if you need LH thread in 1\"x14, see the Premium square tube series (COR-2300222). Also confirm your wall thickness is .156\" — a different wall thickness will change the tube ID and the press fit will not be correct.\u003c\/blockquote\u003e","brand":"Clayton Off Road","offers":[{"title":"Default Title","offer_id":51651324051777,"sku":"COR-2300201","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/COR-2300201-COR.jpg?v=1776528193","url":"https:\/\/obsidianforgedautosupply.com\/products\/clayton-standard-tube-insert-1x14-rh-1-5-dom-tubing-cor-2300201","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}