{"product_id":"clayton-premium-tube-insert-1x14-rh-1-5-square-tubing-cor-2300212","title":"Clayton Off Road Premium CNC Tube Insert 1\"x14 RH for 1.5\"x1.5\" 1\/8\" Wall Square Tubing","description":"\u003ch3\u003eIs This for You?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're building or repairing a control arm or suspension link using 1.5\"x1.5\" 1\/8\" wall square tubing and need a 1\"x14 right-hand threaded insert for the fixed or chassis-side end of the arm.\u003c\/strong\u003e This insert is CNC machined for a press fit into that specific tube size — not a universal weld bung.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need right-hand thread specifically at this position.\u003c\/strong\u003e The RH insert (COR-2300212) is the companion to the LH insert (COR-2300222) — a complete adjustable arm in 1.5\" tube uses one of each. Confirm your thread hand before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're building to Clayton Off Road's control arm tube standards and need matching hardware for the 1.5\"x1.5\" 1\/8\" wall tube system.\u003c\/strong\u003e For the heavier 2\"x2\" 1\/4\" wall tube, see COR-2300213 (1.25\"x12 RH).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Result\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined for precise press fit\u003c\/strong\u003e — machined to the ID of 1.5\"x1.5\" 1\/8\" wall square tubing; no filing, grinding, or gap-filling required before pressing in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\"x14 right-hand thread\u003c\/strong\u003e — matches standard right-hand threaded rod ends used in adjustable control arm fabrication; right-hand thread is standard for the fixed or chassis-side end of an adjustable arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-fit installation, weld to finish\u003c\/strong\u003e — press in with a hydraulic ram or 5 lb sledge, verify square alignment, then fully weld the insert to the tube for a permanent, structural connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe COR-2300212 is Clayton Off Road's premium CNC-machined tube insert for 1.5\"x1.5\" 1\/8\" wall square tubing, threaded 1\"x14 right-hand. This is the right-hand companion to COR-2300222 (1\"x14 LH, same tube size) — a complete adjustable control arm in 1.5\" square tube uses one RH insert at the fixed\/chassis end and one LH insert at the adjuster end. The CNC machining ensures a precise press fit into the tube ID. Clayton presses these in with a hydraulic ram in production; a 5 lb sledge hammer is sufficient for field or shop installation. After pressing, verify the insert is square to the tube axis before welding — a cocked insert will cause thread misalignment and binding at the rod end. Fully weld the insert after confirming square.\u003c\/p\u003e\u003ch3\u003eAudit Table\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCOR-2300212\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Spec\u003c\/td\u003e\n\u003ctd\u003e1\"x14 Right-Hand (RH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Tubing\u003c\/td\u003e\n\u003ctd\u003e1.5\"x1.5\" square tubing, 1\/8\" wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit Type\u003c\/td\u003e\n\u003ctd\u003eCNC-machined press fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Method\u003c\/td\u003e\n\u003ctd\u003eHydraulic ram or 5 lb sledge hammer; fully weld after pressing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Hand\u003c\/td\u003e\n\u003ctd\u003eRight-Hand — for fixed\/chassis end of control arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLH Companion SKU\u003c\/td\u003e\n\u003ctd\u003eCOR-2300222 (1\"x14 LH, same 1.5\" tube)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeavy-Tube RH SKU\u003c\/td\u003e\n\u003ctd\u003eCOR-2300213 (1.25\"x12 RH, 2\" tube)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e4\" L x 4\" W x 4\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVerified Fitment (OFAS Standard)\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ 1.5\"x1.5\" square tubing — 1\/8\" wall thickness only\u003c\/li\u003e\n\u003cli\u003e✅ Any adjustable control arm or suspension link fabricated to this tube spec\u003c\/li\u003e\n\u003cli\u003e✅ 1\"x14 right-hand threaded rod ends and adjusters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDoes NOT Fit:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e❌ 2\"x2\" 1\/4\" wall square tubing — different tube ID; see COR-2300213 (1.25\"x12 RH, 2\" tube)\u003c\/li\u003e\n\u003cli\u003e❌ Round DOM tubing — this insert is machined for square tube ID geometry only\u003c\/li\u003e\n\u003cli\u003e❌ 1\"x14 left-hand (LH) applications — this is a right-hand thread insert; for LH see COR-2300222\u003c\/li\u003e\n\u003cli\u003e❌ 1.5\" square tubing with wall thickness other than 1\/8\" — tube ID will differ and press fit will not be correct\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; Fabrication Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfirm tube ID matches the insert OD before pressing — this insert is machined for 1.5\"x1.5\" 1\/8\" wall square tubing specifically.\u003c\/li\u003e\n\u003cli\u003ePress insert into tube using a hydraulic ram or 5 lb sledge hammer — drive evenly to avoid cocking the insert during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify the insert is square to the tube axis before welding\u003c\/strong\u003e — use a square or straight edge to confirm alignment. A cocked insert will cause thread misalignment and binding at the rod end under load.\u003c\/li\u003e\n\u003cli\u003eFully weld the insert to the tube after confirming square — do not rely on press fit alone for structural use.\u003c\/li\u003e\n\u003cli\u003eAllow weld to cool fully before threading in rod end or adjuster — heat distortion can affect thread engagement.\u003c\/li\u003e\n\u003cli\u003eFor a complete adjustable arm in 1.5\" tube: use COR-2300212 (RH) at the fixed\/chassis end and COR-2300222 (LH) at the adjuster end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalifornia Prop 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. See P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWheel \u0026amp; Tire Fitment\u003c\/h3\u003e\u003cp\u003eNot applicable — this is a fabrication component. Fitment is determined by tube size and thread spec, not vehicle wheel or tire selection.\u003c\/p\u003e\u003cblockquote\u003e\n\u003cstrong\u003eEngineering Question:\u003c\/strong\u003e Are you working with 1.5\"x1.5\" 1\/8\" wall square tubing, and do you need right-hand thread at this position? Confirm your tube wall thickness and thread hand before ordering. For a complete adjustable arm in 1.5\" tube, you need both COR-2300212 (RH, this SKU) and COR-2300222 (LH) — one at each end.\u003c\/blockquote\u003e","brand":"Clayton Off Road","offers":[{"title":"Default Title","offer_id":51651324084545,"sku":"COR-2300212","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/COR-2300212_0-COR.jpg?v=1776528199","url":"https:\/\/obsidianforgedautosupply.com\/products\/clayton-premium-tube-insert-1x14-rh-1-5-square-tubing-cor-2300212","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}