{"product_id":"clayton-lower-control-arm-giiro-bushing-housing-cor-2300107","title":"Clayton Off Road Steel Lower Control Arm GIIRO Bushing Housing 2.750 OD x 2.125 ID x 1.750 Wide","description":"\u003ch3\u003eIs This for You?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're building or repairing a Clayton Off Road lower control arm that uses a GIIRO bushing and need a replacement or additional steel housing to press the bushing into.\u003c\/strong\u003e This is the steel outer housing that the GIIRO bushing seats inside — not the bushing itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need the housing to match the GIIRO bushing OD of 2.125\" and fit into a control arm tube or bracket with a 2.750\" bore.\u003c\/strong\u003e Confirm your control arm housing bore and bushing OD before ordering — dimensional fit is the only compatibility check for this component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're fabricating a custom lower control arm to Clayton Off Road's GIIRO bushing system dimensions.\u003c\/strong\u003e This housing gives you the correct steel shell to build around the GIIRO dual-durometer bushing at the lower control arm position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Result\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel construction\u003c\/strong\u003e — machined steel outer housing provides the structural shell for the GIIRO bushing at the lower control arm mounting position; resists deformation under the lateral and longitudinal loads at this location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision dimensions: 2.750\" OD \/ 2.125\" ID \/ 1.750\" width\u003c\/strong\u003e — machined to accept the GIIRO bushing at the ID and press or weld into the control arm tube or bracket at the OD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for the GIIRO dual-durometer bushing system\u003c\/strong\u003e — the 2.125\" ID is sized to accept the GIIRO bushing used in Clayton Off Road's lower control arm lineup; self-lubricating, self-centering, maintenance-free bushing operation once assembled.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe COR-2300107 is Clayton Off Road's steel lower control arm housing for the GIIRO bushing system. The GIIRO bushing is a dual-durometer design — a harder outer ring for structural load transfer and a softer inner element for vibration isolation and articulation compliance. This steel housing is the outer shell that the GIIRO bushing presses into; the housing is then pressed or welded into the control arm tube or bracket at the lower control arm mounting position. Dimensional specs: 2.750\" OD (housing outer diameter, interfaces with control arm bore), 2.125\" ID (bushing seat, accepts GIIRO bushing OD), 1.750\" width (housing depth). These dimensions must match your control arm design — verify all three before ordering. This is a replacement and fabrication component; it is not a complete bushing assembly.\u003c\/p\u003e\u003ch3\u003eAudit Table\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCOR-2300107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eSteel lower control arm GIIRO bushing housing (housing only — not complete bushing assembly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOD (Housing Outer Diameter)\u003c\/td\u003e\n\u003ctd\u003e2.750\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eID (Bushing Seat)\u003c\/td\u003e\n\u003ctd\u003e2.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e1.750\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushing System\u003c\/td\u003e\n\u003ctd\u003eGIIRO dual-durometer — bushing sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eLower control arm position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e4\" L x 4\" W x 4\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVerified Fitment (OFAS Standard)\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ Clayton Off Road lower control arms using GIIRO bushing system with 2.750\" housing bore\u003c\/li\u003e\n\u003cli\u003e✅ Custom fabricated lower control arms designed to accept a 2.750\" OD housing and 2.125\" ID GIIRO bushing\u003c\/li\u003e\n\u003cli\u003e✅ Replacement housing for worn or damaged lower control arm GIIRO bushing housings matching these dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDoes NOT Fit:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e❌ Upper control arm GIIRO bushing positions — different housing dimensions; verify OD, ID, and width against your specific upper arm spec\u003c\/li\u003e\n\u003cli\u003e❌ Control arm bores other than 2.750\" — housing OD must match the bore it presses or welds into\u003c\/li\u003e\n\u003cli\u003e❌ Non-GIIRO bushing systems — the 2.125\" ID is sized for the GIIRO bushing OD specifically\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; Fabrication Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVerify all three dimensions (2.750\" OD, 2.125\" ID, 1.750\" width) match your control arm design before pressing or welding the housing in place.\u003c\/li\u003e\n\u003cli\u003ePress housing into control arm bore using a hydraulic press — ensure housing is square to the bore axis before pressing fully seated.\u003c\/li\u003e\n\u003cli\u003eIf welding the housing into a fabricated arm, verify square alignment before tacking, then fully weld after confirming position.\u003c\/li\u003e\n\u003cli\u003ePress GIIRO bushing into housing ID after housing is installed and any welds have cooled — heat distortion from welding can affect the 2.125\" ID dimension.\u003c\/li\u003e\n\u003cli\u003eDo not use a hammer directly on the housing face during installation — use a press plate or driver sized to the housing OD to avoid deforming the housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalifornia Prop 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. See P65Warnings.ca.gov.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWheel \u0026amp; Tire Fitment\u003c\/h3\u003e\u003cp\u003eNot applicable — this is a fabrication and replacement component. Fitment is determined by dimensional compatibility with your control arm design, not vehicle wheel or tire selection.\u003c\/p\u003e\u003cblockquote\u003e\n\u003cstrong\u003eEngineering Question:\u003c\/strong\u003e What are the housing bore dimensions on your lower control arm, and are you using the GIIRO bushing system? Confirm the control arm bore accepts a 2.750\" OD housing and that your GIIRO bushing OD is 2.125\" before ordering. This is the housing only — the GIIRO bushing is sold separately.\u003c\/blockquote\u003e","brand":"Clayton Off Road","offers":[{"title":"Default Title","offer_id":51651323953473,"sku":"COR-2300107","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/COR-2300107-COR.jpg?v=1776528176","url":"https:\/\/obsidianforgedautosupply.com\/products\/clayton-lower-control-arm-giiro-bushing-housing-cor-2300107","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}