{"product_id":"clayton-complete-drag-link-flip-kit-jk-cor-5208100","title":"Clayton Off Road Complete Drag Link Flip Kit for 2007-2018 Jeep Wrangler JK","description":"\u003ch3\u003eIs This for You?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're running 3.5\" or 4.5\" of lift on your JK and experiencing bump steer, death wobble, or steering wander caused by incorrect drag link and track bar geometry\u003c\/strong\u003e — this complete kit corrects both issues in one purchase: the drag link flip moves the drag link above the tie rod to restore parallel link geometry, and the 1\/4\" track bar bracket raises the track bar mount for differential cover clearance and improved track bar angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want everything in one box — drag link, knuckle insert, track bar bracket, and all hardware\u003c\/strong\u003e — this kit includes the OEM-style RHD drag link, CNC-machined passenger side upper knuckle insert, metric locknut, 1\/4\" track bar bracket, 9\/16\" Grade 8 bolt with spacer, and three 3\/8\"-16 Grade 8 bolts with lock washers and nuts. Nothing to source separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want to install in your driveway and drive to a welder for final weld-out\u003c\/strong\u003e — the track bar bracket bolts into the factory axle location with the supplied hardware, allowing temporary driving before welding. Drill and install at home, then drive to a certified welder for permanent installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Result\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete drag link flip system — OEM-style RHD drag link + CNC knuckle insert + 1\/4\" track bar bracket + all hardware. Corrects steering geometry at 3.5–4.5\" of lift in one kit.\u003c\/li\u003e\n\u003cli\u003eDrag link flip restores parallel link geometry — moves the drag link above the tie rod to eliminate bump steer and steering wander caused by mismatched link angles at lift height.\u003c\/li\u003e\n\u003cli\u003eRaised 1\/4\" track bar bracket — bolt-and-weld to factory axle location; raises track bar mount for differential cover clearance; incorporates relocated lower sway bar mount.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe COR-5208100 is Clayton Off Road's complete drag link flip kit for the 2007–2018 Jeep Wrangler JK, designed for use with Clayton's 3.5\" and 4.5\" lift kits. At these lift heights, the factory drag link and track bar run at angles that cause bump steer, steering wander, and in severe cases, death wobble — because the drag link and tie rod are no longer parallel and the track bar is too low relative to the differential cover. This kit addresses both issues in a single purchase. The drag link flip converts the JK from a left-hand drive drag link configuration to a right-hand drive configuration: the passenger side upper knuckle is drilled to 7\/8\" and the CNC-machined steel knuckle insert is pressed in, providing the correct seat for the OEM-style RHD drag link end. The 1\/4\" track bar bracket bolts into the factory axle bracket location using three 3\/8\"-16 Grade 8 bolts and one 9\/16\" Grade 8 bolt with spacer, allowing temporary driving before final weld-out. The bracket raises the track bar mount for differential cover clearance and incorporates a relocated lower sway bar mount. Welding, drilling, and cutting are required for permanent installation. Tools required: welder, grinder, 1\/2\" electric drill with 7\/8\" bit, standard hand tools. An adjustable front track bar is strongly recommended to re-center the axle after installation. Individual components are also available separately: COR-5208110 (track bar bracket only) and COR-5208210 (knuckle bushing only). Made in the USA.\u003c\/p\u003e\u003ch3\u003eAudit Table\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCOR-5208100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit Contents\u003c\/td\u003e\n\u003ctd\u003eOEM-Style RHD Drag Link, CNC Knuckle Insert, Metric Locknut, 1\/4\" Track Bar Bracket, 9\/16\" Grade 8 Bolt with Spacer, 3x 3\/8\"-16 Grade 8 Bolt\/Lock Washer\/Nut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesigned For\u003c\/td\u003e\n\u003ctd\u003eClayton Off Road 3.5\" and 4.5\" JK Lift Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Drill Size\u003c\/td\u003e\n\u003ctd\u003e7\/8\" — Passenger Side Upper Knuckle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrack Bar Bracket\u003c\/td\u003e\n\u003ctd\u003e1\/4\" Steel, Bolt-and-Weld to Factory Axle Location\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemporary Drive\u003c\/td\u003e\n\u003ctd\u003eYes — Bracket bolts in; weld-out required for permanent installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSway Bar Mount\u003c\/td\u003e\n\u003ctd\u003eRelocated Lower Sway Bar Mount — Integrated into track bar bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTools Required\u003c\/td\u003e\n\u003ctd\u003eWelder, Grinder, 1\/2\" Drill with 7\/8\" Bit, Standard Hand Tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustable Track Bar\u003c\/td\u003e\n\u003ctd\u003eStrongly Recommended (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndividual Components\u003c\/td\u003e\n\u003ctd\u003eCOR-5208110 (Track Bar Bracket Only), COR-5208210 (Knuckle Bushing Only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e10 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e36\" x 4\" x 4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVerified Fitment (OFAS Standard)\u003c\/h3\u003e\u003cp\u003e✅ Fits 2007–2018 Jeep Wrangler JK (2-Door and 4-Door) — All Trims — 3.5\" to 4.5\" Lift\u003cbr\u003e❌ Does NOT fit Jeep Wrangler JL (2018–2026) — different front axle and steering geometry\u003cbr\u003e❌ Does NOT fit Jeep Gladiator JT (2020–2026) — different front axle and steering geometry\u003cbr\u003e❌ Does NOT fit Jeep Wrangler TJ\/LJ (1997–2006) — different front axle architecture\u003cbr\u003e❌ Not recommended for lifts below 3.5\" or above 4.5\" without verifying geometry correction requirements\u003cbr\u003e❌ Drilling, cutting, and welding required — not a bolt-on kit\u003c\/p\u003e\u003ch3\u003eInstallation \u0026amp; Fabrication Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrilling, cutting, and welding required.\u003c\/strong\u003e This is not a bolt-on kit. Professional fabrication capability or access to a certified welder is required for permanent installation.\u003c\/li\u003e\n\u003cli\u003eDrill the passenger side upper knuckle to 7\/8\" using a 1\/2\" electric drill — use a drill press or guide for a straight, on-axis bore. Press the CNC knuckle insert into the drilled bore.\u003c\/li\u003e\n\u003cli\u003eInstall the 1\/4\" track bar bracket using three 3\/8\"-16 Grade 8 bolts and one 9\/16\" Grade 8 bolt with spacer into the factory axle bracket location — snug all bolts before driving to the welder.\u003c\/li\u003e\n\u003cli\u003eDrive to a certified welder and weld both sides of the track bar bracket to the front axle — full-penetration welds on all bracket-to-axle contact surfaces.\u003c\/li\u003e\n\u003cli\u003eInstall the OEM-style RHD drag link with the metric locknut — torque to specification.\u003c\/li\u003e\n\u003cli\u003eAfter welding, coat all bare metal with weld-through primer and chassis paint.\u003c\/li\u003e\n\u003cli\u003eInstall an adjustable front track bar to re-center the axle at the new track bar mount height.\u003c\/li\u003e\n\u003cli\u003eFront alignment (caster, toe) must be set after full installation.\u003c\/li\u003e\n\u003cli\u003eVerify sway bar end link length is appropriate for the relocated lower sway bar mount position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWheel \u0026amp; Tire Fitment\u003c\/h3\u003e\u003cp\u003eCompatible with standard JK wheel and tire combinations at 3.5–4.5\" of lift. Steering geometry correction directly affects tire wear and handling — verify front alignment after installation with your specific tire size.\u003c\/p\u003e\u003cblockquote\u003e\n\u003cstrong\u003eEngineering Question:\u003c\/strong\u003e Are you running exactly 3.5\" or 4.5\" of lift on your JK with a Clayton lift kit? This kit is engineered for those specific lift heights. If you're running a different lift height or a non-Clayton lift kit, verify that the drag link flip geometry correction is appropriate for your setup before ordering. Also confirm you have access to a 7\/8\" drill bit, a press or driver for the knuckle insert, and a certified welder for final bracket weld-out.\u003c\/blockquote\u003e","brand":"Clayton Off Road","offers":[{"title":"Default Title","offer_id":51651334275393,"sku":"COR-5208100","price":237.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/COR-5208100_1-COR.jpg?v=1776529131","url":"https:\/\/obsidianforgedautosupply.com\/products\/clayton-complete-drag-link-flip-kit-jk-cor-5208100","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}