{"product_id":"clayton-adjustable-front-track-bar-tj-lj-xj-zj-cor-4500200","title":"Clayton Off Road Adjustable Front Track Bar for 1984-2006 Jeep TJ\/LJ\/XJ\/ZJ","description":"\u003ch3\u003eIs This for You?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're running 4–5\" of lift on a TJ or LJ, or 3–6\" on an XJ or ZJ, and your front axle is walking left or right under acceleration or braking\u003c\/strong\u003e — the factory track bar is the wrong length for your lift height, and this adjustable bar lets you dial in axle centering precisely without shimming or bending the OEM bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a greaseable, rebuildable Johnny Joint at the frame end and a maintenance-free GIIRO bushing at the axle end\u003c\/strong\u003e — the frame end sees the highest lateral load and benefits from the Johnny Joint's rebuildability; the axle end uses a dual-durometer GIIRO bushing for NVH isolation and self-centering compliance without maintenance intervals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're upgrading from a factory track bar that's binding, worn, or undersized for your lift\u003c\/strong\u003e — the 1-3\/8\" x 5\/16\" wall DOM tube is significantly stiffer than the OEM stamped steel bar, and the bent design provides maximum clearance for lift kits and aftermarket components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Result\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable length — optimized for TJ\/LJ at 4–5\" of lift and XJ\/ZJ at 3–6\" of lift; dial in axle centering precisely at your specific ride height.\u003c\/li\u003e\n\u003cli\u003eJohnny Joint adjuster at the frame end — greaseable, rebuildable, high misalignment for the lateral load demands of the frame-side track bar mount.\u003c\/li\u003e\n\u003cli\u003eGIIRO dual-durometer bushing at the axle end — maintenance-free, self-centering, NVH-isolating compliance at the axle mount. 9\/16\" Grade 8 thru-bolt allows drilling out the factory axle bracket to accept the HD bushing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe COR-4500200 is Clayton Off Road's adjustable front track bar for the 1984–2006 Jeep TJ, LJ, XJ, and ZJ platforms. The bar is built from 1-3\/8\" x 5\/16\" wall DOM tubing — a significantly stiffer cross-section than the OEM stamped steel track bar — and is bent for maximum clearance with lift kits and aftermarket components. The frame-end joint is a Johnny Joint adjuster: greaseable, rebuildable, and rated for high misalignment under the lateral loads generated at the frame-side track bar mount. The axle-end joint is a GIIRO dual-durometer bushing — a softer outer layer for NVH isolation and a stiffer inner core for lateral load resistance, self-centering and maintenance-free for the life of the bar. The axle-end hardware uses a 9\/16\" Grade 8 thru-bolt, sized to allow the factory axle bracket hole to be drilled out to accept the larger HD bushing without replacing the bracket. Adjustable length is optimized for TJ\/LJ builds running 4–5\" of lift and XJ\/ZJ builds running 3–6\" of lift. Pairs with Clayton track bar brackets for a complete front track bar upgrade. Lifetime warranty. Made in the USA.\u003c\/p\u003e\u003ch3\u003eAudit Table\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCOR-4500200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eFront Track Bar, Adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003ctd\u003e1-3\/8\" x 5\/16\" Wall DOM, Bent for Clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame-End Joint\u003c\/td\u003e\n\u003ctd\u003eJohnny Joint Adjuster — Greaseable, Rebuildable, High Misalignment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle-End Joint\u003c\/td\u003e\n\u003ctd\u003eGIIRO Dual-Durometer Bushing — Maintenance-Free, Self-Centering, NVH-Isolating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle-End Hardware\u003c\/td\u003e\n\u003ctd\u003e9\/16\" Grade 8 Thru-Bolt — Drill out factory bracket to accept HD bushing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Range (TJ\/LJ)\u003c\/td\u003e\n\u003ctd\u003e4\" to 5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Range (XJ\/ZJ)\u003c\/td\u003e\n\u003ctd\u003e3\" to 6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e14 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e36\" x 4\" x 4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVerified Fitment (OFAS Standard)\u003c\/h3\u003e\u003cp\u003e✅ Fits 1997–2006 Jeep Wrangler TJ — Front Track Bar, 4–5\" Lift\u003cbr\u003e✅ Fits 2004–2006 Jeep Wrangler LJ Unlimited — Front Track Bar, 4–5\" Lift\u003cbr\u003e✅ Fits 1984–2001 Jeep Cherokee XJ — Front Track Bar, 3–6\" Lift\u003cbr\u003e✅ Fits 1993–1998 Jeep Grand Cherokee ZJ — Front Track Bar, 3–6\" Lift\u003cbr\u003e❌ Does NOT fit Jeep Wrangler JK (2007–2018) — different front track bar geometry and bracket spec\u003cbr\u003e❌ Does NOT fit Jeep Wrangler JL (2018–2026) — different front suspension architecture\u003cbr\u003e❌ Does NOT fit Jeep Grand Cherokee WJ (1999–2004) — different front track bar geometry\u003cbr\u003e❌ Does NOT fit rear track bar positions\u003cbr\u003e❌ Not recommended for lifts below 3\" or above 6\" — verify your lift height falls within the platform-specific range\u003c\/p\u003e\u003ch3\u003eInstallation \u0026amp; Fabrication Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDrill out the factory axle bracket hole to 9\/16\" to accept the HD GIIRO bushing and Grade 8 thru-bolt — do not attempt to install the axle-end bushing in an unmodified factory bracket hole.\u003c\/li\u003e\n\u003cli\u003eAdjust track bar length with the axle centered under the vehicle at ride height — do not set length at full droop or full compression.\u003c\/li\u003e\n\u003cli\u003eGrease the Johnny Joint frame-end adjuster at the zerk fitting before first use and at regular service intervals.\u003c\/li\u003e\n\u003cli\u003eGIIRO axle-end bushing is maintenance-free — no grease fitting, no service interval at the axle mount.\u003c\/li\u003e\n\u003cli\u003eTorque 9\/16\" Grade 8 axle-end thru-bolt to specification at ride height, not at full droop.\u003c\/li\u003e\n\u003cli\u003eAfter installation, verify axle centering by measuring equal distance from the tire to the fender on both sides at ride height — adjust bar length as needed.\u003c\/li\u003e\n\u003cli\u003ePairs with Clayton track bar brackets for a complete front track bar upgrade — verify bracket compatibility with your specific platform before ordering.\u003c\/li\u003e\n\u003cli\u003eFront alignment (toe, caster) should be verified after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWheel \u0026amp; Tire Fitment\u003c\/h3\u003e\u003cp\u003eCompatible with standard TJ\/LJ\/XJ\/ZJ wheel and tire combinations within the specified lift ranges. Axle centering directly affects tire clearance at full steering lock — verify clearance after installation with your specific tire size.\u003c\/p\u003e\u003cblockquote\u003e\n\u003cstrong\u003eEngineering Question:\u003c\/strong\u003e What is your current lift height and platform? TJ\/LJ builds should be running 4–5\" of lift for this bar to provide the correct adjustment range; XJ\/ZJ builds should be running 3–6\". If your lift height falls outside these ranges, this bar may not provide sufficient adjustment to center your axle — contact us before ordering to verify fitment for your specific build.\u003c\/blockquote\u003e","brand":"Clayton Off Road","offers":[{"title":"Default Title","offer_id":51651329360193,"sku":"COR-4500200","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/COR-4500200-COR.jpg?v=1776528640","url":"https:\/\/obsidianforgedautosupply.com\/products\/clayton-adjustable-front-track-bar-tj-lj-xj-zj-cor-4500200","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}