{"product_id":"clayton-adjustable-front-track-bar-jl-jt-cor-4509100","title":"Clayton Off Road Adjustable Front Track Bar for 2018-2026 Jeep Wrangler JL and Gladiator JT","description":"\u003ch3\u003eIs This for You?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're running 0–6\" of lift on your JL or JT and your front axle is walking left or right under acceleration or braking\u003c\/strong\u003e — this adjustable track bar covers the full JL\/JT lift range from stock height to 6\", letting you dial in axle centering precisely without shimming or bending the OEM bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a bolt-in upgrade with no cutting, no drilling, and no modified brackets\u003c\/strong\u003e — this bar reuses your OEM track bar bolts and installs directly into the factory frame and axle mounts, making it the cleanest possible upgrade path for JL and JT owners who don't want to modify their chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want forged GIIRO joints at both ends for maintenance-free, NVH-isolating performance\u003c\/strong\u003e — the dual-durometer GIIRO bushing design provides a softer outer layer for noise and vibration isolation and a stiffer inner core for lateral load resistance, with no grease intervals and no rebuild schedule.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThe Result\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-in installation — no cutting, no drilling, reuses OEM bolts. Direct replacement for the factory JL\/JT front track bar with adjustable length for 0–6\" of lift.\u003c\/li\u003e\n\u003cli\u003eForged GIIRO joints at both ends — maintenance-free, dual-durometer, NVH-isolating. Differential cover clearance bend for maximum compatibility with JL\/JT front axle geometry.\u003c\/li\u003e\n\u003cli\u003e1-3\/8\" x 5\/16\" wall DOM tube — significantly stiffer than the OEM stamped steel bar. Lifetime warranty. Made in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe COR-4509100 is Clayton Off Road's adjustable front track bar for the 2018–2026 Jeep Wrangler JL and Gladiator JT. Unlike the TJ\/LJ\/XJ\/ZJ bar (COR-4500200), which uses a Johnny Joint at the frame end, this bar uses forged GIIRO joints at both ends — a dual-durometer bushing design with a softer outer durometer for NVH isolation and a stiffer inner core for lateral load resistance. The GIIRO joint is maintenance-free with no grease fitting and no rebuild interval, making it the correct choice for the JL\/JT platform where the factory track bar uses a similar maintenance-free bushing design. The bar includes a differential cover clearance bend — a geometry-specific bend that provides clearance for the JL\/JT front differential cover through the full range of suspension travel and steering sweep. Installation is bolt-in: no cutting, no drilling, no bracket modification. The bar reuses the OEM track bar bolts at both the frame and axle mounts. Adjustable length covers 0–6\" of lift, making this bar appropriate for stock-height JL\/JT builds through aggressive lift setups. Built from 1-3\/8\" x 5\/16\" wall DOM tubing. Lifetime warranty. Made in the USA.\u003c\/p\u003e\u003ch3\u003eAudit Table\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCOR-4509100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eFront Track Bar, Adjustable, Bolt-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube\u003c\/td\u003e\n\u003ctd\u003e1-3\/8\" x 5\/16\" Wall DOM, Differential Cover Clearance Bend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame-End Joint\u003c\/td\u003e\n\u003ctd\u003eForged GIIRO — Dual-Durometer, Maintenance-Free, NVH-Isolating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle-End Joint\u003c\/td\u003e\n\u003ctd\u003eForged GIIRO — Dual-Durometer, Maintenance-Free, NVH-Isolating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-In — No Cutting, No Drilling, Reuses OEM Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift Range\u003c\/td\u003e\n\u003ctd\u003e0\" to 6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e12 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e36\" x 4\" x 4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVerified Fitment (OFAS Standard)\u003c\/h3\u003e\u003cp\u003e✅ Fits 2018–2026 Jeep Wrangler JL (2-Door) — All Trims, All Engines — Front Track Bar, 0–6\" Lift\u003cbr\u003e✅ Fits 2018–2026 Jeep Wrangler JL Unlimited (4-Door) — All Trims, All Engines — Front Track Bar, 0–6\" Lift\u003cbr\u003e✅ Fits 2020–2026 Jeep Gladiator JT — All Trims, All Engines — Front Track Bar, 0–6\" Lift\u003cbr\u003e❌ Does NOT fit Jeep Wrangler JK (2007–2018) — different front track bar geometry and mount spec\u003cbr\u003e❌ Does NOT fit Jeep Wrangler TJ\/LJ (1997–2006) — see COR-4500200 for TJ\/LJ\/XJ\/ZJ bar\u003cbr\u003e❌ Does NOT fit Jeep Cherokee XJ or Grand Cherokee ZJ — see COR-4500200\u003cbr\u003e❌ Does NOT fit rear track bar positions\u003cbr\u003e❌ Not recommended for lifts exceeding 6\" — verify adjustment range covers your specific lift height\u003c\/p\u003e\u003ch3\u003eInstallation \u0026amp; Fabrication Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-in installation — remove the factory front track bar and install this bar in its place using the OEM bolts at both the frame and axle mounts. No cutting, drilling, or bracket modification required.\u003c\/li\u003e\n\u003cli\u003eAdjust track bar length with the axle centered under the vehicle at ride height — do not set length at full droop or full compression.\u003c\/li\u003e\n\u003cli\u003eGIIRO joints at both ends are maintenance-free — no grease fittings, no service interval required at either mount.\u003c\/li\u003e\n\u003cli\u003eAfter installation, verify axle centering by measuring equal distance from the tire to the fender on both sides at ride height — adjust bar length as needed.\u003c\/li\u003e\n\u003cli\u003eTorque OEM track bar bolts to factory specification at ride height, not at full droop.\u003c\/li\u003e\n\u003cli\u003eFront alignment (toe, caster) should be verified after installation, especially if changing lift height at the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWheel \u0026amp; Tire Fitment\u003c\/h3\u003e\u003cp\u003eCompatible with standard JL\/JT wheel and tire combinations across the 0–6\" lift range. Axle centering directly affects tire clearance at full steering lock — verify clearance after installation with your specific tire size and lift height.\u003c\/p\u003e\u003cblockquote\u003e\n\u003cstrong\u003eEngineering Question:\u003c\/strong\u003e What is your current lift height? This bar is adjustable from 0–6\" of lift — if you're running more than 6\", verify the adjustment range will center your axle at your specific ride height before ordering. Also confirm your vehicle is a 2018–2026 JL or 2020–2026 JT — this bar does not fit JK or earlier platforms.\u003c\/blockquote\u003e","brand":"Clayton Off Road","offers":[{"title":"Default Title","offer_id":51651331227969,"sku":"COR-4509100","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/COR-4509100-COR.jpg?v=1776528753","url":"https:\/\/obsidianforgedautosupply.com\/products\/clayton-adjustable-front-track-bar-jl-jt-cor-4509100","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}