{"product_id":"bds-4-inch-radius-arm-lift-kit-bds1700fpe-ram-3500-2019-2024-gas-no-overload","title":"BDS 4-Inch Radius Arm Lift Kit — Ram 3500  SKU: BDS1700FPE | Ram 3500 2019–2024 | 4WD | Gas | 4\" Front \/ 3\" Rear | FOX 2.5 Performance Elite Series | Without Factory Rear Overload Leaf","description":"\u003cp dir=\"ltr\"\u003eA complete 4-inch radius arm suspension lift kit engineered for the 2019–2024 Ram 3500 gas 4WD — configured for trucks without the factory rear overload leaf spring, with FOX 2.5 Performance Elite Series shocks. Heavy-duty tubular replacement radius arms mount in the factory location with caster adjustment and OE-style rubber bushings. Gas-specific progressive rate Pro-Ride coil springs provide the 4-inch front lift. A precision transfer case indexing ring and high-clearance transmission crossmember address driveline geometry at this lift height. The rear uses a high-strength fabricated lift block with extended U-bolts for a 3-inch rear lift. FOX 2.5 Performance Elite Series shocks with DSC adjuster and external reservoir front and rear. Supports up to 37-inch tires.\u003c\/p\u003e\n\u003chr\u003e\n\u003cblockquote dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e Gas 4WD only. \u003cstrong\u003eFor 2024: only Limited Longhorn, Tradesman, Big Horn, Laramie, and Limited trims are verified.\u003c\/strong\u003e \u003cstrong\u003eExhaust modification is required to clear the front driveshaft\u003c\/strong\u003e — the vehicle can be driven without the front driveshaft to an exhaust shop. This is the \u003cstrong\u003eWithout Factory Rear Overload Leaf\u003c\/strong\u003e variant — if your Ram 3500 has the factory rear overload leaf, see SKU BDS1701FPE. Dually or Mega Cab models with an Aisin 8-bolt transmission require BDS122409, sold separately.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequired separately (conditional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eBDS122409 — DEF tank relocation bracket, required for Dually or Mega Cab with Aisin 8-bolt transmission\u003c\/li\u003e\n\u003cli\u003eBDS122422 — Manual transfer case shifter extension, if equipped with manual T-case\u003c\/li\u003e\n\u003cli\u003eBDS122406 — Carrier bearing drop, if equipped with 2-piece rear driveshaft (carrier bearing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch4 dir=\"ltr\"\u003eVerified Fitment\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eYear\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMake\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eModel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTrims\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDrive\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFuel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eLimited Longhorn, Tradesman, Big Horn, Laramie, Limited\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eComponent Specifications\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLift Configuration (this SKU):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBDS Suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBDS1700FPE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront lift height\u003c\/td\u003e\n\u003ctd\u003e4 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront lift method\u003c\/td\u003e\n\u003ctd\u003eCoil spring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear lift height\u003c\/td\u003e\n\u003ctd\u003e3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear lift method\u003c\/td\u003e\n\u003ctd\u003eBlock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear configuration\u003c\/td\u003e\n\u003ctd\u003eWithout factory rear overload leaf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock option (this build)\u003c\/td\u003e\n\u003ctd\u003eFOX 2.5 Performance Elite Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tire clearance\u003c\/td\u003e\n\u003ctd\u003eUp to 37 inches (trimming may be required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated install time\u003c\/td\u003e\n\u003ctd\u003e8–10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifficulty level\u003c\/td\u003e\n\u003ctd\u003eModerate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecialty tools required\u003c\/td\u003e\n\u003ctd\u003ePitman arm puller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHD Radius Arms:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-strength tubular steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFactory location\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaster adjustment\u003c\/td\u003e\n\u003ctd\u003eYes — adjustable across a range of lift heights\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame bushing\u003c\/td\u003e\n\u003ctd\u003eOE-style rubber — smooth, quiet, service-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePro-Ride Coil Springs — Front:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFull-length, progressive rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift provided\u003c\/td\u003e\n\u003ctd\u003e4 inches (front)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRear Lift Block:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHigh-strength fabricated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift height\u003c\/td\u003e\n\u003ctd\u003e3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eWithout factory rear overload leaf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFOX 2.5 Performance Elite Series Shocks (front and rear):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody diameter\u003c\/td\u003e\n\u003ctd\u003e2.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody material\u003c\/td\u003e\n\u003ctd\u003eImpact extruded aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eExternal reservoir monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft\u003c\/td\u003e\n\u003ctd\u003e7\/8-inch hard chrome plated heat-treated alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression adjuster\u003c\/td\u003e\n\u003ctd\u003eDSC — Dual Speed Compression Adjuster (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReservoir\u003c\/td\u003e\n\u003ctd\u003eExternal — separates shock oil from high-pressure nitrogen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eServiceability\u003c\/td\u003e\n\u003ctd\u003eFully serviceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock warranty\u003c\/td\u003e\n\u003ctd\u003e1-year manufacturer's warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRecommended Tire and Wheel Configurations (trimming may be required):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTire Size\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWheel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBackspace\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e35 x 12.50\u003c\/td\u003e\n\u003ctd\u003e17 x 9\u003c\/td\u003e\n\u003ctd\u003e4.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e37 x 12.50\u003c\/td\u003e\n\u003ctd\u003e17 x 9\u003c\/td\u003e\n\u003ctd\u003e5.625 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e37 x 12.50\u003c\/td\u003e\n\u003ctd\u003e20 x 9\u003c\/td\u003e\n\u003ctd\u003e5.625 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eWhat Is and Is NOT Included\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIncluded — Front:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGas-specific progressive rate Pro-Ride coil springs (pair)\u003c\/li\u003e\n\u003cli\u003eHD tubular radius arms (pair)\u003c\/li\u003e\n\u003cli\u003eForged drop pitman arm\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket\u003c\/li\u003e\n\u003cli\u003eSway bar relocation hardware\u003c\/li\u003e\n\u003cli\u003eBrake line brackets\u003c\/li\u003e\n\u003cli\u003eTransfer case indexing ring\u003c\/li\u003e\n\u003cli\u003eHigh-clearance transmission crossmember\u003c\/li\u003e\n\u003cli\u003eFOX 2.5 Performance Elite Series front shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIncluded — Rear:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHigh-strength fabricated 3-inch lift block (without overload leaf configuration)\u003c\/li\u003e\n\u003cli\u003eExtended U-bolts\u003c\/li\u003e\n\u003cli\u003eFOX 2.5 Performance Elite Series rear shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot included (conditional — may be required):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eBDS122409 — DEF tank relocation bracket (required for Dually or Mega Cab with Aisin 8-bolt transmission)\u003c\/li\u003e\n\u003cli\u003eBDS122422 — Manual transfer case shifter extension (required for manual T-case)\u003c\/li\u003e\n\u003cli\u003eBDS122406 — Carrier bearing drop (required for 2-piece rear driveshaft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eCritical Compatibility\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithout factory rear overload leaf:\u003c\/strong\u003e This kit is configured for Ram 3500 trucks that do not have the factory rear overload leaf spring. If your truck has the factory rear overload leaf, see SKU BDS1701FPE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas engine only:\u003c\/strong\u003e Gas-specific Pro-Ride coil springs are included. Diesel Ram 3500 is not supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2024 trim restriction:\u003c\/strong\u003e Only Limited Longhorn, Tradesman, Big Horn, Laramie, and Limited are verified for the 2024 Ram 3500.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust modification required:\u003c\/strong\u003e Exhaust modification is required to clear the front driveshaft. The vehicle can be driven without the front driveshaft to an exhaust shop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDually or Mega Cab with Aisin 8-bolt transmission:\u003c\/strong\u003e Requires BDS122409, sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual T-case:\u003c\/strong\u003e Requires BDS122422, sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-piece rear driveshaft:\u003c\/strong\u003e Requires BDS122406, sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOX 2.5 vs. FOX 2.0:\u003c\/strong\u003e The FOX 2.5 Performance Elite adds an external reservoir, 2.5-inch body, 7\/8-inch shaft, and DSC Dual Speed Compression Adjuster. For the FOX 2.0 version, see BDS1700FS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADAS recalibration:\u003c\/strong\u003e Required after installation. All recalibration costs are the owner's responsibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eProfessional installation is strongly recommended. This kit is rated Moderate with an estimated installation time of 8–10 hours. A pitman arm puller is the only specialty tool required.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExhaust modification:\u003c\/strong\u003e Required before front driveshaft reinstallation. The Ram 3500 can be driven without the front driveshaft to an exhaust shop.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVerify before beginning:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eRear spring configuration confirmed as without factory overload leaf (if overload leaf present, order BDS1701FPE)\u003c\/li\u003e\n\u003cli\u003eConfirm gas engine\u003c\/li\u003e\n\u003cli\u003eDually or Mega Cab with Aisin 8-bolt — BDS122409 required\u003c\/li\u003e\n\u003cli\u003eManual T-case — BDS122422 required\u003c\/li\u003e\n\u003cli\u003e2-piece rear driveshaft — BDS122406 required\u003c\/li\u003e\n\u003cli\u003eExhaust modification plan in place\u003c\/li\u003e\n\u003cli\u003e2024 trim confirmed in verified fitment list\u003c\/li\u003e\n\u003cli\u003eADAS recalibration appointment scheduled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eProfessional alignment is required after installation. Refer to the current BDS Suspension installation instructions for SKU BDS1700FPE for complete procedures, torque specifications, and component-specific instructions.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThe Obsidian Take\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe BDS1700FPE is the without-overload-leaf companion to BDS1701FPE — same 4-inch radius arm gas Ram 3500 platform, same FOX 2.5 Performance Elite shocks with DSC adjuster and external reservoir, same exhaust modification requirement, same Moderate difficulty and pitman arm puller only requirement. The rear block is dimensioned for trucks without the factory overload leaf spring. Rear spring pack is the single pre-order check: no overload leaf, this kit; overload leaf present, BDS1701FPE.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYou own a 2019–2024 Ram 3500 gas 4WD without the factory rear overload leaf spring.\u003c\/li\u003e\n\u003cli\u003eYour 2024 trim is Limited Longhorn, Tradesman, Big Horn, Laramie, or Limited.\u003c\/li\u003e\n\u003cli\u003eYou want 4 inches of front lift and 3 inches of rear lift with FOX 2.5 Performance Elite shocks and DSC adjuster.\u003c\/li\u003e\n\u003cli\u003eYou want up to 37-inch tire clearance.\u003c\/li\u003e\n\u003cli\u003eYou are prepared to complete the required exhaust modification.\u003c\/li\u003e\n\u003cli\u003eYou have confirmed your transfer case type and rear driveshaft configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is Not For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYour Ram 3500 has the factory rear overload leaf spring — see BDS1701FPE.\u003c\/li\u003e\n\u003cli\u003eYour Ram 3500 has a diesel engine.\u003c\/li\u003e\n\u003cli\u003eYour Ram 3500 is 2WD.\u003c\/li\u003e\n\u003cli\u003eYour 2024 trim is not in the verified list.\u003c\/li\u003e\n\u003cli\u003eYou are not prepared to complete the required exhaust modification.\u003c\/li\u003e\n\u003cli\u003eYou want more lift — see BDS1686FPE for 5.5-inch front \/ 5-inch rear on the same platform.\u003c\/li\u003e\n\u003cli\u003eYou want FOX 2.0 shocks — see BDS1700FS.\u003c\/li\u003e\n\u003cli\u003eYou want NX2 Nitro Series shocks — see the NX2 variant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eProduct Family Reference\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSKU\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFront Lift\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRear Lift\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRear Configuration\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eShock\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBDS1700FS\u003c\/td\u003e\n\u003ctd\u003e4 inches\u003c\/td\u003e\n\u003ctd\u003e3 inches\u003c\/td\u003e\n\u003ctd\u003eWithout overload leaf\u003c\/td\u003e\n\u003ctd\u003eFOX 2.0\u003c\/td\u003e\n\u003ctd\u003eGas Ram 3500 2019–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBDS1700FPE (this product)\u003c\/td\u003e\n\u003ctd\u003e4 inches\u003c\/td\u003e\n\u003ctd\u003e3 inches\u003c\/td\u003e\n\u003ctd\u003eWithout overload leaf\u003c\/td\u003e\n\u003ctd\u003eFOX 2.5 Elite\u003c\/td\u003e\n\u003ctd\u003eGas Ram 3500 2019–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBDS1701FS\u003c\/td\u003e\n\u003ctd\u003e4 inches\u003c\/td\u003e\n\u003ctd\u003e3 inches\u003c\/td\u003e\n\u003ctd\u003eWith overload leaf\u003c\/td\u003e\n\u003ctd\u003eFOX 2.0\u003c\/td\u003e\n\u003ctd\u003eGas Ram 3500 2019–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBDS1701FPE\u003c\/td\u003e\n\u003ctd\u003e4 inches\u003c\/td\u003e\n\u003ctd\u003e3 inches\u003c\/td\u003e\n\u003ctd\u003eWith overload leaf\u003c\/td\u003e\n\u003ctd\u003eFOX 2.5 Elite\u003c\/td\u003e\n\u003ctd\u003eGas Ram 3500 2019–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBDS1686FPE\u003c\/td\u003e\n\u003ctd\u003e5.5 inches\u003c\/td\u003e\n\u003ctd\u003e5 inches\u003c\/td\u003e\n\u003ctd\u003eWithout overload leaf\u003c\/td\u003e\n\u003ctd\u003eFOX 2.5 Elite\u003c\/td\u003e\n\u003ctd\u003eGas Ram 3500 2019–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eCommon Questions\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is the difference between BDS1700FPE and BDS1700FS?\u003c\/strong\u003e\u003cbr\u003eThe shock option only. BDS1700FPE includes FOX 2.5 Performance Elite Series shocks with external reservoir, 7\/8-inch shaft, and DSC adjuster. BDS1700FS includes FOX 2.0 Performance Series shocks. All other components, lift heights, fitment, and requirements are identical.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is the difference between BDS1700FPE and BDS1701FPE?\u003c\/strong\u003e\u003cbr\u003eRear spring configuration. BDS1700FPE is for Ram 3500 trucks without the factory rear overload leaf. BDS1701FPE is for trucks with it. Both use FOX 2.5 Performance Elite shocks.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIs exhaust modification required?\u003c\/strong\u003e\u003cbr\u003eYes. Exhaust modification is required to clear the front driveshaft. The vehicle can be driven without the front driveshaft to an exhaust shop.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMy truck is a Dually or Mega Cab with an Aisin transmission — what do I need?\u003c\/strong\u003e\u003cbr\u003eBDS122409 (DEF tank relocation bracket) is required. It is sold separately.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMy truck has a manual T-case — what do I need?\u003c\/strong\u003e\u003cbr\u003eBDS122422 is required. It is sold separately.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDo I need the carrier bearing drop?\u003c\/strong\u003e\u003cbr\u003eOnly if your Ram 3500 has a 2-piece rear driveshaft. If so, BDS122406 is required.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat specialty tools do I need?\u003c\/strong\u003e\u003cbr\u003eA pitman arm puller is the only specialty tool listed.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes ADAS need to be recalibrated after installation?\u003c\/strong\u003e\u003cbr\u003eYes. All ADAS sensors require professional recalibration after installation. All recalibration costs are the owner's responsibility.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eManufacturer Data Disclaimer\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eFitment, specification, included-component, and installation data for this kit are sourced from BDS Suspension manufacturer documentation and OFAS-verified product data current as of publication. Specifications are subject to change without notice; confirm current documentation for this SKU at the time of purchase.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eRequired Legal, Warning, Fitment, and Return Notices\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExhaust Modification Warning:\u003c\/strong\u003e Exhaust modification is required to clear the front driveshaft. The vehicle can be driven without the front driveshaft to an exhaust shop.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eADAS Recalibration Warning:\u003c\/strong\u003e This kit alters vehicle ride height and suspension geometry. All advanced driver assistance system (ADAS) sensors require professional recalibration after installation. Schedule recalibration at an authorized dealer or certified ADAS service center. All recalibration costs are the owner's responsibility.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eInstallation Warning:\u003c\/strong\u003e Professional installation is strongly recommended. A professional wheel alignment is required after installation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTire Fitment Notice:\u003c\/strong\u003e BDS references configurations up to 37 x 12.50-inch tires. Trimming may be required. Buyer is responsible for verifying tire and wheel clearance for their specific vehicle and build.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e All returns require prior authorization from Obsidian Forged Auto Supply — do not ship any product back without a Return Merchandise Authorization (RMA). To request an RMA, contact OFAS at \u003ca href=\"mailto:Support@obsidianforgedautosupply.com\"\u003eSupport@obsidianforgedautosupply.com\u003c\/a\u003e or 469-407-7538 (Monday–Friday 9am–5pm CST, Saturday 9am–3pm CST) with your order number, product SKU, return reason, and photos. Return requests must be submitted within 90 days of delivery. To qualify, the product must be new, unused, uninstalled, complete with all hardware and included components, and in original manufacturer packaging. Do not write on, tape to, or place shipping labels directly on the manufacturer's product box. Return shipping is the customer's responsibility in all cases. Non-defective returns may be subject to a 15% restocking fee. No restocking fee applies when OFAS shipped the wrong item or the return is due to a verified defect or approved damage claim. Some products — including special-order, electrical, and installed items — may be non-returnable. Return eligibility is also subject to applicable manufacturer and supplier return requirements. Approved refunds are issued to the original payment method within approximately 10 business days of the warehouse receiving and processing the returned product. For damaged, missing, or incorrect shipments, contact OFAS within 48 hours of delivery, retain all packaging, and do not install the product.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":51395820192065,"sku":"BDS1700FPE","price":5494.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/BDS1700FPE.webp?v=1771173595","url":"https:\/\/obsidianforgedautosupply.com\/products\/bds-4-inch-radius-arm-lift-kit-bds1700fpe-ram-3500-2019-2024-gas-no-overload","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}