{"product_id":"bds-4-inch-4-link-lift-kit-bds1676fs-ram-3500-2019-2024-gas","title":"BDS 4-Inch 4-Link Lift Conversion Kit — Ram 3500 SKU: BDS1676FS | Ram 3500 2019–2024 | 4WD | Gas | 4\" Front \/ 3\" Rear | FOX 2.0 Performance Series | Without Factory Rear Overload Leaf","description":"\u003cp dir=\"ltr\"\u003eA complete 4-inch 4-Link suspension lift kit engineered for the 2019–2024 Ram 3500 gas 4WD. The 4-Link conversion replaces the factory stamped steel radius arms with high-strength ¼-inch steel brackets and HD upper and lower control arms to correct axle positioning and limit caster change throughout wheel travel. Gas-specific Pro-Ride dual-rate coil springs provide the correct front lift height. A precision transfer case indexing ring and high-clearance transmission crossmember address driveline geometry. Three-inch rear lift via high-strength steel block. FOX 2.0 Performance Series shocks front and rear. Clears up to 35-inch tires. 100% bolt-on.\u003c\/p\u003e\n\u003chr\u003e\n\u003cblockquote dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e Fits 2019–2024 Ram 3500 gas 4WD. \u003cstrong\u003eFor 2024: only Big Horn, Laramie, Limited Longhorn, Tradesman, and Limited trims are verified.\u003c\/strong\u003e Gas engine only — diesel Ram 3500 is not supported by this kit. \u003cstrong\u003eExhaust modification is required to clear the front driveshaft — this must be completed before or during installation. The vehicle can be driven without the front driveshaft to an exhaust shop.\u003c\/strong\u003e Verify your rear spring configuration before ordering: select this listing (Without Factory Rear Overload Leaf) only if your Ram 3500 does not have the factory rear overload leaf spring. Vehicles with a manual transfer case require BDS122422 (sold separately). Vehicles with a 2-piece rear driveshaft (carrier bearing) require BDS122406 (sold separately).\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequired separately (conditional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eBDS122422 — Manual transfer case shifter extension, if equipped with manual T-case\u003c\/li\u003e\n\u003cli\u003eBDS122406 — Carrier bearing drop, if equipped with 2-piece rear driveshaft (carrier bearing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch4 dir=\"ltr\"\u003eVerified Fitment\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eYear\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMake\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eModel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTrims\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDrive\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eFuel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eBig Horn, Laramie, Limited Longhorn, Tradesman, Limited\u003c\/td\u003e\n\u003ctd\u003e4WD\u003c\/td\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003ctd\u003eSpecific trims only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGas engine only.\u003c\/strong\u003e Diesel Ram 3500 is not supported. Confirm your 2024 trim is in the verified list before ordering.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eComponent Specifications\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLift Configuration (this SKU):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBDS Suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBDS1676FS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront lift height\u003c\/td\u003e\n\u003ctd\u003e4 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront lift method\u003c\/td\u003e\n\u003ctd\u003e4-Link conversion with Pro-Ride coil springs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear lift height\u003c\/td\u003e\n\u003ctd\u003e3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear lift method\u003c\/td\u003e\n\u003ctd\u003eBlock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear configuration\u003c\/td\u003e\n\u003ctd\u003eWithout factory rear overload leaf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock option (this build)\u003c\/td\u003e\n\u003ctd\u003eFOX 2.0 Performance Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tire clearance\u003c\/td\u003e\n\u003ctd\u003eUp to 35 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation method\u003c\/td\u003e\n\u003ctd\u003e100% bolt-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePro-Ride Coil Springs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFull-length, dual-rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eGas-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e4-Link Control Arm Conversion:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket material\u003c\/td\u003e\n\u003ctd\u003eHigh-strength ¼-inch steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl arms\u003c\/td\u003e\n\u003ctd\u003eHD upper and lower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eCorrects axle positioning; limits caster change throughout wheel travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFOX 2.0 Performance Series Shocks (front and rear):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody diameter\u003c\/td\u003e\n\u003ctd\u003e2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody material\u003c\/td\u003e\n\u003ctd\u003eImpact extruded aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eInternal floating piston (IFP) monotube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting ends\u003c\/td\u003e\n\u003ctd\u003eCNC machined 6061-T6 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft\u003c\/td\u003e\n\u003ctd\u003e5\/8-inch hard chrome plated heat-treated alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston\u003c\/td\u003e\n\u003ctd\u003eRace-developed high-flow design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValving\u003c\/td\u003e\n\u003ctd\u003eApplication-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eClear anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRear Lift Block:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHigh-strength steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLift height\u003c\/td\u003e\n\u003ctd\u003e3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eWithout factory rear overload leaf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eWhat Is and Is NOT Included\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIncluded — Front:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGas-specific Pro-Ride dual-rate coil springs (pair)\u003c\/li\u003e\n\u003cli\u003e4-Link control arm conversion brackets (high-strength ¼-inch steel)\u003c\/li\u003e\n\u003cli\u003eHD upper and lower control arms\u003c\/li\u003e\n\u003cli\u003eForged drop pitman arm\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation bracket\u003c\/li\u003e\n\u003cli\u003eSway bar relocation hardware\u003c\/li\u003e\n\u003cli\u003eBrake line brackets\u003c\/li\u003e\n\u003cli\u003eTransfer case indexing ring\u003c\/li\u003e\n\u003cli\u003eHigh-clearance transmission crossmember\u003c\/li\u003e\n\u003cli\u003eFOX 2.0 Performance Series front shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIncluded — Rear:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHigh-strength steel 3-inch lift block (without overload leaf configuration)\u003c\/li\u003e\n\u003cli\u003eExtended U-bolts\u003c\/li\u003e\n\u003cli\u003eFOX 2.0 Performance Series rear shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot included (conditional — may be required):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eBDS122422 — Manual transfer case shifter extension (required for manual T-case)\u003c\/li\u003e\n\u003cli\u003eBDS122406 — Carrier bearing drop (required if equipped with 2-piece rear driveshaft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eCritical Compatibility\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eGas engine only:\u003c\/strong\u003e This kit uses gas-specific Pro-Ride coil springs. Diesel Ram 3500 is not supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4WD only:\u003c\/strong\u003e 2WD Ram 3500 is not supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2024 trim restriction:\u003c\/strong\u003e Only Big Horn, Laramie, Limited Longhorn, Tradesman, and Limited trims are verified for the 2024 Ram 3500. Confirm your 2024 trim before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear spring configuration:\u003c\/strong\u003e This listing is for Ram 3500 trucks WITHOUT the factory rear overload leaf spring. Select the overload leaf variant if your truck has the factory rear overload spring. Verify your rear spring pack before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust modification required:\u003c\/strong\u003e Exhaust modification is necessary to clear the front driveshaft. This must be completed as part of the installation process. The vehicle can be driven without the front driveshaft to an exhaust shop if needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual transfer case:\u003c\/strong\u003e Vehicles with a manual T-case require BDS122422 (manual transfer case shifter extension), sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-piece rear driveshaft:\u003c\/strong\u003e Vehicles with a carrier bearing rear driveshaft require BDS122406 (carrier bearing drop), sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADAS recalibration:\u003c\/strong\u003e Required after installation at a qualified dealer or ADAS service center. All recalibration costs are the owner's responsibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire fitment:\u003c\/strong\u003e Clears up to 35-inch tires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eProfessional installation is strongly recommended. All components are 100% bolt-on. Installation involves front 4-Link conversion, coil spring replacement, steering correction components, transfer case indexing, transmission crossmember installation, and rear block installation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExhaust modification:\u003c\/strong\u003e Exhaust modification is required to provide clearance for the front driveshaft. This modification must be performed before or during installation. The Ram 3500 can be driven without the front driveshaft installed to reach an exhaust shop if necessary.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVerify before beginning:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eRear spring configuration (with or without factory overload leaf)\u003c\/li\u003e\n\u003cli\u003eTransfer case type (manual T-case requires BDS122422)\u003c\/li\u003e\n\u003cli\u003eRear driveshaft type (2-piece carrier bearing requires BDS122406)\u003c\/li\u003e\n\u003cli\u003eExhaust modification plan\u003c\/li\u003e\n\u003cli\u003eADAS recalibration appointment scheduled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eProfessional alignment is required after installation. Refer to the current BDS Suspension installation instructions for SKU BDS1676FS for complete procedures, torque specifications, and component-specific instructions.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThe Obsidian Take\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe BDS1676FS is the purpose-built 4-Link lift solution for the gas Ram 3500 4WD — 4 inches of front lift via a proper 4-Link conversion and gas-specific Pro-Ride coil springs, 3 inches of rear lift via steel block, and FOX 2.0 Performance Series shocks all around for trail-capable damping at this height. The 4-Link conversion is the substantive upgrade here: it replaces the geometry limitations of the factory stamped radius arms with corrected axle positioning and caster control throughout wheel travel. Two pre-installation items need plans before this kit ships: the exhaust modification for front driveshaft clearance and rear overload leaf verification. Get the exhaust shop scheduled and confirm your rear spring pack. Both are simple to address in advance and expensive to ignore after installation has started.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYou own a 2019–2024 Ram 3500 gas 4WD in a verified trim configuration.\u003c\/li\u003e\n\u003cli\u003eYour Ram 3500 does not have the factory rear overload leaf spring.\u003c\/li\u003e\n\u003cli\u003eYou want a 4-inch 4-Link lift with corrected steering and suspension geometry.\u003c\/li\u003e\n\u003cli\u003eYou want FOX 2.0 Performance Series shocks with application-specific valving.\u003c\/li\u003e\n\u003cli\u003eYou want up to 35-inch tire clearance with a 100% bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eYou are prepared to complete the required exhaust modification for front driveshaft clearance.\u003c\/li\u003e\n\u003cli\u003eYou have confirmed your transfer case type and rear driveshaft configuration before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is Not For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYour Ram 3500 has a diesel engine.\u003c\/li\u003e\n\u003cli\u003eYour Ram 3500 is 2WD.\u003c\/li\u003e\n\u003cli\u003eYour 2024 Ram 3500 trim is not Big Horn, Laramie, Limited Longhorn, Tradesman, or Limited.\u003c\/li\u003e\n\u003cli\u003eYour Ram 3500 has the factory rear overload leaf spring — see the overload leaf variant of this kit.\u003c\/li\u003e\n\u003cli\u003eYou are not prepared to complete the required exhaust modification.\u003c\/li\u003e\n\u003cli\u003eYou want NX2 Nitro Series shocks — see the NX2 variant of this kit.\u003c\/li\u003e\n\u003cli\u003eYou want FOX 2.5 Performance Elite Series shocks — see the FOX 2.5 variant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eProduct Family Reference\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eConfiguration\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eShock Option\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRear Configuration\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBDS1676FS (this product)\u003c\/td\u003e\n\u003ctd\u003eFOX 2.0 Performance Series\u003c\/td\u003e\n\u003ctd\u003e3-inch block, without overload leaf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNX2 Nitro variant\u003c\/td\u003e\n\u003ctd\u003eNX2 Nitro Series\u003c\/td\u003e\n\u003ctd\u003e3-inch block, without overload leaf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFOX 2.5 variant\u003c\/td\u003e\n\u003ctd\u003eFOX 2.5 Performance Elite\u003c\/td\u003e\n\u003ctd\u003e3-inch block, without overload leaf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith overload leaf variants\u003c\/td\u003e\n\u003ctd\u003eVarious\u003c\/td\u003e\n\u003ctd\u003e3-inch block, with factory overload leaf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eCommon Questions\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this kit fit the diesel Ram 3500?\u003c\/strong\u003e\u003cbr\u003eNo. This kit uses gas-specific Pro-Ride coil springs and is designed for gas engine Ram 3500 models only.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhich 2024 Ram 3500 trims does this fit?\u003c\/strong\u003e\u003cbr\u003eBig Horn, Laramie, Limited Longhorn, Tradesman, and Limited. Not all 2024 trims are verified — confirm yours before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow do I know if my Ram has the factory rear overload leaf?\u003c\/strong\u003e\u003cbr\u003eThe factory rear overload leaf spring is an option on some Ram 3500 trucks. Inspect your rear spring pack — if it has three or more leaves, or if your truck was configured with a heavy-duty towing package, you may have the overload leaf. When in doubt, confirm with a shop or your build sheet before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhy is an exhaust modification required?\u003c\/strong\u003e\u003cbr\u003eAt 4 inches of lift, the front driveshaft angle requires exhaust clearance that the factory exhaust does not provide. This modification is required before the front driveshaft can be reinstalled. The truck can be driven without the front driveshaft to reach an exhaust shop.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDo I need the carrier bearing drop?\u003c\/strong\u003e\u003cbr\u003eOnly if your Ram 3500 has a 2-piece rear driveshaft with a carrier bearing. Confirm your driveshaft configuration — if 2-piece, BDS122406 is required.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDo I need BDS122422?\u003c\/strong\u003e\u003cbr\u003eOnly if your Ram 3500 has a manual transfer case. If equipped with a manual T-case, this shifter extension is required.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes ADAS need to be recalibrated after installation?\u003c\/strong\u003e\u003cbr\u003eYes. This kit changes vehicle ride height and suspension geometry. All ADAS sensors require professional recalibration after installation. All recalibration costs are the owner's responsibility.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eManufacturer Data Disclaimer\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eFitment, specification, included-component, and installation data for this kit are sourced from BDS Suspension manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eRequired Legal, Warning, Fitment, and Return Notices\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eADAS Recalibration Warning:\u003c\/strong\u003e This kit alters vehicle ride height and suspension geometry. All advanced driver assistance system (ADAS) sensors require professional recalibration after installation. Schedule recalibration at an authorized dealer or certified ADAS service center. All recalibration costs are the owner's responsibility.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eInstallation Warning:\u003c\/strong\u003e Professional installation is strongly recommended. Exhaust modification is required to clear the front driveshaft — this must be completed as part of the installation process. A professional wheel alignment is required after installation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTire Fitment Notice:\u003c\/strong\u003e Up to 35-inch tires are supported. Buyer is responsible for verifying tire and wheel clearance for their specific vehicle and build.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e All returns require prior authorization from Obsidian Forged Auto Supply — do not ship any product back without a Return Merchandise Authorization (RMA). To request an RMA, contact OFAS at \u003ca href=\"mailto:Support@obsidianforgedautosupply.com\"\u003eSupport@obsidianforgedautosupply.com\u003c\/a\u003e or 469-407-7538 (Monday–Friday 9am–5pm CST, Saturday 9am–3pm CST) with your order number, product SKU, return reason, and photos. Return requests must be submitted within 90 days of delivery. To qualify, the product must be new, unused, uninstalled, complete with all hardware and included components, and in original manufacturer packaging. Do not write on, tape to, or place shipping labels directly on the manufacturer's product box. Return shipping is the customer's responsibility in all cases. Non-defective returns may be subject to a 15% restocking fee. No restocking fee applies when OFAS shipped the wrong item or the return is due to a verified defect or approved damage claim. Some products — including special-order, electrical, and installed items — may be non-returnable. Return eligibility is also subject to applicable manufacturer and supplier return requirements. Approved refunds are issued to the original payment method within approximately 10 business days of the warehouse receiving and processing the returned product. For damaged, missing, or incorrect shipments, contact OFAS within 48 hours of delivery, retain all packaging, and do not install the product.\u003c\/p\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":51395821568321,"sku":"BDS1676FS","price":2912.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/BDS1676FS.jpg?v=1771163360","url":"https:\/\/obsidianforgedautosupply.com\/products\/bds-4-inch-4-link-lift-kit-bds1676fs-ram-3500-2019-2024-gas","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}