{"product_id":"baja-designs-lp6-pro-bumper-light-kit-447671-jeep-jl-jt","title":"Baja Designs LP6 Pro Bumper Light Kit — Jeep Wrangler JL \/ Gladiator JT SKU: 447671 | Jeep Wrangler JL 2018–2026 \/ Gladiator JT 2020–2026 | OEM Steel Bumper | Driving\/Combo | Clear | Toggle","description":"\u003cp dir=\"ltr\"\u003eA complete bumper light kit tested specifically on the Jeep JL and JT with the Rubicon steel bumper. Built around the LP6 Pro pod (SKU 270003) — a 6-inch, 11,225-lumen Driving\/Combo unit with Integrated Peripheral Technology (IPT) delivering 1,972 lumens of dedicated peripheral lighting, Direct Ducted Cooling, and three lighting modes including amber daytime running light backlighting. Toggle harness wiring is designed to run in conjunction with factory upfitter systems or sPOD and Switch Pros power distribution units.\u003c\/p\u003e\n\u003chr\u003e\n\u003cblockquote dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e This kit is designed for the Jeep Wrangler JL and Gladiator JT with the OEM steel bumper — specifically tested on the Rubicon steel bumper. It will not fit aftermarket bumpers. Confirm your bumper configuration before ordering.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequired separately:\u003c\/strong\u003e A factory upfitter system, sPOD unit, or Switch Pros unit is not required but is compatible — the kit toggle harness is specifically designed to integrate with these systems. The LP6 Pro pods use a DT06-4S Deutsch terminal connector — confirm connector compatibility if integrating with existing wiring.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch4 dir=\"ltr\"\u003eVerified Fitment\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eMake\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eModel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eYears\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eConfiguration\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler JL\u003c\/td\u003e\n\u003ctd\u003e2018–2026\u003c\/td\u003e\n\u003ctd\u003eOEM steel bumper — Rubicon steel bumper tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGladiator JT\u003c\/td\u003e\n\u003ctd\u003e2020–2026\u003c\/td\u003e\n\u003ctd\u003eOEM steel bumper — Rubicon steel bumper tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOEM steel bumper required.\u003c\/strong\u003e This kit has been tested with the Rubicon steel bumper. Aftermarket bumpers are not supported.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eComponent Specifications\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLP6 Pro LED Light Pod (SKU 270003 — included in kit):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent SKU\u003c\/td\u003e\n\u003ctd\u003e270003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eLP6 Pro LED Light Pod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain beam pattern\u003c\/td\u003e\n\u003ctd\u003eDriving\/Combo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain beam lumens\u003c\/td\u003e\n\u003ctd\u003e11,225\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain beam wattage\u003c\/td\u003e\n\u003ctd\u003e103.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain beam amperage\u003c\/td\u003e\n\u003ctd\u003e7.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecondary lighting\u003c\/td\u003e\n\u003ctd\u003eIntegrated Peripheral Technology (IPT) — 4 LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecondary (IPT) lumens\u003c\/td\u003e\n\u003ctd\u003e1,972\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecondary (IPT) wattage\u003c\/td\u003e\n\u003ctd\u003e15W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecondary (IPT) amperage\u003c\/td\u003e\n\u003ctd\u003e1.0A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting modes\u003c\/td\u003e\n\u003ctd\u003eHigh Beam \/ Low Beam \/ Amber Daytime Running Light Backlighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBacklight wattage\u003c\/td\u003e\n\u003ctd\u003e4.14W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBacklight amperage\u003c\/td\u003e\n\u003ctd\u003e0.3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED quantity — main\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED quantity — IPT\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens color\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens material\u003c\/td\u003e\n\u003ctd\u003eHardcoated polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing material\u003c\/td\u003e\n\u003ctd\u003ePowder coat cast aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing color\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBezel material\u003c\/td\u003e\n\u003ctd\u003ePowder coat cast aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling technology\u003c\/td\u003e\n\u003ctd\u003eDirect Ducted Cooling (DDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal connector\u003c\/td\u003e\n\u003ctd\u003eDT06-4S Deutsch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvervoltage protection\u003c\/td\u003e\n\u003ctd\u003eBuilt-in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAverage rated life\u003c\/td\u003e\n\u003ctd\u003e49,930 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater resistance\u003c\/td\u003e\n\u003ctd\u003eIP69K — waterproof to 9 feet, pressure washable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact resistance\u003c\/td\u003e\n\u003ctd\u003eIK10 compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDurability standard\u003c\/td\u003e\n\u003ctd\u003eExceeds MIL-STD-810G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6.50 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6.50 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e3.20 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.20 lbs per unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime Warranty + 30-Day Satisfaction Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eWhat Is and Is NOT Included\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eLP6 Pro LED Light Pods (SKU 270003) — vehicle-specific kit quantity for JL\/JT bumper application\u003c\/li\u003e\n\u003cli\u003eToggle switch wiring harness — designed for use with factory upfitter systems or sPOD\/Switch Pros units\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware (stainless steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eFactory upfitter system, sPOD unit, or Switch Pros unit (compatible but not required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eCritical Compatibility\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM steel bumper only:\u003c\/strong\u003e This kit is specifically designed and tested for the Jeep JL\/JT OEM steel bumper, including the Rubicon steel bumper. Aftermarket bumpers are not supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToggle harness integration:\u003c\/strong\u003e The included toggle harness is specifically designed to work in conjunction with factory upfitter systems, sPOD units, or Switch Pros power distribution units. A separate upfitter harness is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDT06-4S Deutsch connector:\u003c\/strong\u003e The LP6 Pro pods use DT06-4S Deutsch terminal connectors. Confirm connector compatibility if integrating with existing wiring systems before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting modes:\u003c\/strong\u003e The LP6 Pro offers three modes — High Beam, Low Beam, and Amber Daytime Running Light backlighting. All three are controlled through the kit harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPT peripheral lighting:\u003c\/strong\u003e The Integrated Peripheral Technology provides 1,972 lumens of dedicated peripheral illumination through 4 dedicated LEDs, separate from the 6 main forward-projecting LEDs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-road use:\u003c\/strong\u003e Some lighting outputs may not be legal for use on public roads. Buyer is responsible for compliance with all applicable laws and regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eProfessional installation is strongly recommended. This kit has been tested and designed specifically for the Jeep JL and JT OEM steel bumper — the wiring routes and mounting positions are specific to this application. The toggle harness integrates with the factory upfitter system or sPOD\/Switch Pros unit if present. All necessary hardware is included.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRefer to the current Baja Designs installation instructions for SKU 447671 for complete procedures, torque specifications, and wiring diagrams.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThe Obsidian Take\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe 447671 is Baja Designs' complete LP6 Pro solution for the Wrangler JL and Gladiator JT on the OEM steel bumper — tested specifically on the Rubicon steel bumper to eliminate installation guesswork. The LP6 Pro brings three lighting modes (high, low, and amber DRL backlighting), Direct Ducted Cooling for sustained thermal performance, and IPT peripheral lighting that fills the 200-degree spread beyond what the main 6-LED forward beam covers. The toggle harness is pre-designed to work with factory upfitter systems and sPOD or Switch Pros units, which makes this a natural companion to the sPOD kits in this catalog. The DT06-4S Deutsch connector is the one detail to confirm against existing wiring before the kit arrives.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYou own a 2018–2026 Jeep Wrangler JL or 2020–2026 Gladiator JT with the OEM steel bumper.\u003c\/li\u003e\n\u003cli\u003eYou want LP6 Pro pods with High\/Low beam, amber DRL backlighting, and IPT peripheral lighting in one kit.\u003c\/li\u003e\n\u003cli\u003eYou are running a factory upfitter system, sPOD unit, or Switch Pros unit and want a wiring setup designed to integrate with those systems.\u003c\/li\u003e\n\u003cli\u003eYou want a tested, bumper-specific kit with all necessary hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eThis Product Is Not For You If\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eYour Jeep has an aftermarket bumper — OEM steel bumper only.\u003c\/li\u003e\n\u003cli\u003eYour vehicle is not a 2018–2026 Wrangler JL or 2020–2026 Gladiator JT.\u003c\/li\u003e\n\u003cli\u003eYou need an upfitter-specific harness variant rather than toggle — confirm harness requirements with Baja Designs before ordering.\u003c\/li\u003e\n\u003cli\u003eYour existing wiring uses a connector other than DT06-4S Deutsch and you have not confirmed adapter compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eProduct Family Reference\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSKU\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eLights\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApplication\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHarness\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e447671 (this product)\u003c\/td\u003e\n\u003ctd\u003eLP6 Pro\u003c\/td\u003e\n\u003ctd\u003eJL\/JT OEM Steel Bumper\u003c\/td\u003e\n\u003ctd\u003eToggle\u003c\/td\u003e\n\u003ctd\u003eTested on Rubicon steel bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eThe LP6 Pro pod is also available individually as SKU 270003 for custom installations.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eCommon Questions\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDoes this fit aftermarket bumpers?\u003c\/strong\u003e\u003cbr\u003eNo. This kit is designed and tested for the OEM steel bumper on the Wrangler JL and Gladiator JT. Aftermarket bumper fitment is not supported.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDo I need an sPOD or Switch Pros unit to use this kit?\u003c\/strong\u003e\u003cbr\u003eNo. The toggle harness operates independently. However, the wiring is specifically designed to integrate with factory upfitter systems, sPOD units, and Switch Pros units if present in your build.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat are the three lighting modes?\u003c\/strong\u003e\u003cbr\u003eHigh Beam, Low Beam, and Amber Daytime Running Light backlighting. All three modes are controlled through the included kit harness.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is Integrated Peripheral Technology (IPT)?\u003c\/strong\u003e\u003cbr\u003eIPT uses 4 dedicated LEDs to project 1,972 lumens of peripheral lighting around the main forward beam, extending the usable light spread to 200 degrees.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is Direct Ducted Cooling (DDC)?\u003c\/strong\u003e\u003cbr\u003eDDC allows air to travel through the front of the LP6 Pro housing and over the rear heat sinks, improving cooling capacity and sustained performance under high-output use.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat connector does the LP6 Pro use?\u003c\/strong\u003e\u003cbr\u003eThe LP6 Pro uses a DT06-4S Deutsch terminal connector. Confirm connector compatibility if integrating with existing wiring before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eBaja Designs provides a Limited Lifetime Warranty and a 30-Day Money Back Satisfaction Guarantee.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eManufacturer Data Disclaimer\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eFitment, specification, included-component, and installation data for this kit are sourced from Baja Designs manufacturer documentation and OFAS-verified product data current as of publication. Manufacturer specifications and included components are subject to change without notice; confirm current documentation for this SKU at the time of purchase.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eRequired Legal, Warning, Fitment, and Return Notices\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOff-Road Use Notice:\u003c\/strong\u003e Some lighting configurations and outputs may not be legal for use on public roads. Buyer is responsible for compliance with all applicable laws, regulations, and vehicle safety guidelines regarding auxiliary lighting use.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Cancer and Reproductive Harm. See \u003ca href=\"http:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWarranty Summary:\u003c\/strong\u003e Baja Designs provides a Limited Lifetime Warranty against defects in materials and workmanship, along with a 30-Day Money Back Satisfaction Guarantee. Full warranty terms are available at BajaDesigns.com.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eReturn Policy:\u003c\/strong\u003e Baja Designs provides a 30-day satisfaction guarantee from the invoice date. To initiate any return or exchange, a Return Authorization (RMA) number must be obtained before shipping — returns received without an RMA number will not be processed. Return shipping is the buyer's responsibility. Baja Designs is not responsible for items lost or damaged in transit. A 15% restocking fee applies to items returned after 30 days from the invoice date, items with installation or mounting damage, items not in original packaging or not in 100% sellable condition, and items damaged by poor packaging. Exchanges for unused items are accepted within 90 days of the invoice date for one-to-one replacements of the same product only — a different color of the same product is acceptable; different products, upgrades, or substitutions are not eligible. Refunds are applied to the original payment method within 7–10 business days of Baja Designs receiving the returned goods.\u003c\/p\u003e","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":51426348499265,"sku":"447671","price":1093.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/447671UP_c8080071-866d-4317-969c-7000a33cff3e.jpg?v=1772240768","url":"https:\/\/obsidianforgedautosupply.com\/products\/baja-designs-lp6-pro-bumper-light-kit-447671-jeep-jl-jt","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}