{"product_id":"amp-research-bedstep-toyota-tundra-xk70-75329-01a","title":"AMP Research BedStep for 2022-2026 Toyota Tundra 3rd Gen XK70","description":"\u003cp\u003e✅ \u003cstrong\u003eOFAS VERIFIED FITMENT:\u003c\/strong\u003e 2022–2026 Toyota Tundra 3rd Generation (XK70 Platform) | All Bed Lengths | 2WD \u0026amp; 4WD | Frame-Mounted | Foot-Activated | 300 lb Load Rated\u003cbr\u003e📍 \u003cstrong\u003eRegional Best-Sellers:\u003c\/strong\u003e Engineered for High-Mercury and Bayou environments.\u003c\/p\u003e\u003ch2\u003eWhy Obsidian Recommended This for Your Region\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOptimized for High-Mercury Conditions:\u003c\/strong\u003e High-Mercury Tundra owners — running job sites in the Southwest, the Gulf Coast, and the Deep South — deal with sustained ambient temps that push cheap step hardware past its rated threshold fast. We carry the BedStep because its high-strength aluminum construction and corrosion-resistant finish are engineered to stay dimensionally stable in High-Mercury conditions where the cab thermometer reads 115°F and the rear frame is radiating another 30 on top of that. Your 300 lb load rating stays intact. Your foot-activated mechanism deploys clean. Every time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for Bayou Duty:\u003c\/strong\u003e Bayou Tundra owners — running South Louisiana, the Mississippi Delta, and the Gulf Coast wetlands — deal with year-round humidity, standing water, and salt air that destroy cheap step hardware within a single season. We’ve vetted the corrosion-resistant hardware and reinforced hinge system on this unit specifically because Bayou conditions demand a step that resists moisture infiltration at the pivot, stays grippy on a wet step pad, and deploys clean after sitting in a humid garage all week.\u003c\/p\u003e\u003ch2\u003eIs This for You? (Before You Buy)\u003c\/h2\u003e\u003cp\u003eConfirm these 3 “Truths” to ensure a 100% fit:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e[ ] \u003cstrong\u003eGeneration:\u003c\/strong\u003e Do you have a \u003cem\u003e2022–2026\u003c\/em\u003e Toyota Tundra (3rd generation \/ XK70 platform)? (2021 and earlier Tundra is the 2nd generation XK50 with different frame mounting points — it requires a separate BedStep unit).\u003c\/li\u003e\n\u003cli\u003e[ ] \u003cstrong\u003eRear Bumper:\u003c\/strong\u003e Are you running a stock rear bumper? TRD Pro rear bumper buyers must confirm step clearance before ordering. Aftermarket rear bumpers, rear armor, and tow sensor brackets also require clearance verification — measure twice.\u003c\/li\u003e\n\u003cli\u003e[ ] \u003cstrong\u003eBed Length:\u003c\/strong\u003e Confirm your bed length and 2WD\/4WD configuration — all configurations are confirmed fitments for 75329-01A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe Driver Experience (The Obsidian Take)\u003c\/h2\u003e\u003cp\u003eMost Tundra bed access solutions are a tire step that shifts every time you use it or a tailgate you have to climb over with a load in your hands on a truck that starts at $50,000. We chose the 75329-01A because AMP Research’s frame-mounted BedStep deploys with a single foot tap, holds 300 lbs without flex, and stows flush to maintain ground clearance when not in use. The reinforced hinge system and all-weather non-slip traction pad mean zero maintenance — no grease schedule, no seized pivot after a Bayou summer, no step that stops working when you need it most at the boat ramp or the job site. Expect a 3rd gen Tundra that works as hard as the owner running it.\u003c\/p\u003e\u003ch2\u003eObsidian DIY Notes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Measure twice before drilling — aftermarket liners, bed-extenders, tow package brackets, and trailer hitch receivers can interfere with the frame mount on this unit. TRD Pro rear bumper buyers: confirm step clearance before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat Else You’ll Need:\u003c\/strong\u003e Confirm your Tundra is the 2022–2026 3rd generation XK70 — not the 2021 or earlier XK50 — before ordering. If you’re running an aftermarket rear bumper or rear armor, contact our team to verify mounting clearance before we ship.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ch3\u003e2022–2026 Toyota Tundra XK70 BedStep Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 75329-01A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e Toyota Tundra 3rd Gen XK70 (2022–2026) — not compatible with 2nd gen XK50 (2021 and earlier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Rating:\u003c\/strong\u003e 300 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type:\u003c\/strong\u003e Frame-mounted — driver or passenger side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActivation:\u003c\/strong\u003e Foot-activated deploy \/ retract — no hands required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e High-strength aluminum with reinforced hinge system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStep Surface:\u003c\/strong\u003e Non-slip all-weather textured step pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All bed lengths | 2WD \u0026amp; 4WD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Stows flush — maintains ground clearance when not in use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Corrosion-resistant hardware and finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping:\u003c\/strong\u003e Ships via Ground (Standard Parcel) depending on regional warehouse availability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTundra XK70 BedStep Installation \u0026amp; Technical Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Moderate DIY \/ Professional Recommended for optimal bracket alignment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneration Note:\u003c\/strong\u003e XK70 (2022–2026) only — XK50 (2021 and earlier) requires a separate BedStep unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRD Pro Note:\u003c\/strong\u003e TRD Pro rear bumper buyers must confirm step clearance before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Note:\u003c\/strong\u003e Aftermarket rear bumpers, rear armor, tow sensor brackets, and trailer hitch receivers require clearance verification before installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-Install:\u003c\/strong\u003e No alignment or suspension recalibration required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolicy Note:\u003c\/strong\u003e Once installed, the unit is non-returnable per AMP Research policy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVerified Fitment (OFAS Standard)\u003c\/h2\u003e\u003cp\u003e✅ \u003cstrong\u003eCONFIRMED FITMENT:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2022–2026 Toyota Tundra — 3rd Generation XK70 | All Bed Lengths | 2WD \u0026amp; 4WD\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e❌ \u003cstrong\u003eFITMENT REQUIREMENTS:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2021 and Earlier Toyota Tundra (2nd Gen XK50):\u003c\/strong\u003e Different frame mounting points — requires a XK50-specific BedStep unit. Contact our team for the correct part number.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRD Pro Rear Bumper:\u003c\/strong\u003e Step clearance verification required before ordering. Contact our team to confirm compatibility with your specific TRD Pro configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFinal Fitment Check\u003c\/h2\u003e\u003cp\u003eDon’t guess on your bed access setup. Text your VIN to \u003cstrong\u003e(469) 407-7538\u003c\/strong\u003e for a 100% Yes\/No confirmation from an Obsidian Tech before we ship.\u003c\/p\u003e","brand":"AMP Research","offers":[{"title":"Default Title","offer_id":51447960404289,"sku":"75329-01A","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0974\/1284\/1793\/files\/75329-01A.png?v=1772814756","url":"https:\/\/obsidianforgedautosupply.com\/products\/amp-research-bedstep-toyota-tundra-xk70-75329-01a","provider":"Obsidian Forged Auto Supply","version":"1.0","type":"link"}