Clayton Off Road Rear Long Arm Frame Brackets for 2018-2026 Jeep Wrangler JL

Is This for You?

• You're building a long arm suspension system on your 2018–2026 Jeep Wrangler JL and need the rear frame brackets that relocate the lower control arm mounting points rearward on the frame. These brackets are the foundation of the rear long arm conversion — without them, long arm lower control arms cannot be properly mounted.
• You want CNC laser-cut 1/4" steel brackets that are part of Clayton Off Road's complete long arm kit system, not a generic universal bracket. These are precision-cut for the JL frame geometry — exact fitment, no trimming or modification required.
• You're building a serious off-road JL that needs the geometry correction and increased arm length that only a long arm system provides. Long arm geometry reduces pinion angle change through suspension travel, improves caster correction, and increases articulation over short arm systems.

The Result

• CNC laser-cut from 1/4" steel — precision-cut for exact fitment to the 2018–2026 JL frame; 1/4" wall thickness provides the structural rigidity required at the rear lower control arm mounting position under long arm loads.
• Rear frame bracket set for long arm conversion — relocates the rear lower control arm mounting points to the correct long arm geometry position on the JL frame; designed as part of Clayton Off Road's complete JL long arm suspension system.
• Made in the USA — manufactured by Clayton Off Road to the same standards as their complete suspension kits.

The COR-2209200 is Clayton Off Road's rear long arm frame bracket set for the 2018–2026 Jeep Wrangler JL. These brackets are a component of Clayton's complete JL long arm suspension system — they relocate the rear lower control arm mounting points rearward on the frame to accommodate the longer arm geometry of a long arm system. Long arm geometry reduces the pinion angle change through suspension travel compared to short arm systems, which reduces driveline vibration and improves caster correction at lift height. The brackets are CNC laser-cut from 1/4" steel for precision fitment to the JL frame — no trimming, grinding, or modification required for installation on a stock JL frame. At 29 lbs, plan for appropriate lifting equipment during installation. Made in the USA.

Audit Table

Verified Fitment (OFAS Standard)

Fits:

• ✅ 2018–2026 Jeep Wrangler Sport (JL)
• ✅ 2018–2026 Jeep Wrangler Sport S (JL)
• ✅ 2018–2026 Jeep Wrangler Rubicon (JL)
• ✅ 2018–2026 Jeep Wrangler Unlimited Sport (JL)
• ✅ 2018–2026 Jeep Wrangler Unlimited Sport S (JL)
• ✅ 2018–2026 Jeep Wrangler Unlimited Sahara (JL)
• ✅ 2018–2026 Jeep Wrangler Unlimited Rubicon (JL)
• ✅ 2018–2019 Jeep Wrangler Unlimited Moab (JL)
• ✅ 2021 Jeep Wrangler 80th Anniversary (JL)
• ✅ 2021 Jeep Wrangler Freedom (JL)
• ✅ 2021 Jeep Wrangler Islander (JL)
• ✅ 2021 Jeep Wrangler Unlimited 80th Anniversary (JL)

Does NOT Fit:

• ❌ 2007–2018 Jeep Wrangler JK — different frame geometry; see JK-specific long arm brackets
• ❌ Jeep Gladiator JT — different frame and wheelbase geometry
• ❌ Short arm suspension systems — these brackets are designed for long arm geometry only

Installation & Fabrication Notes

• These brackets are designed for use as part of Clayton Off Road's complete JL long arm suspension system — verify compatibility with your specific long arm kit before ordering as standalone brackets.
• Installation requires removal of the factory rear lower control arm mounting points and welding or bolting the new brackets to the JL frame — follow Clayton Off Road's installation instructions for your specific long arm kit.
• Full 4-wheel alignment required after installation — long arm geometry changes caster and pinion angle; use a shop familiar with long arm JL geometry.
• Driveshaft angle and length should be verified after installation — long arm systems change the pinion angle and may require driveshaft modification depending on lift height.
• California Prop 65 Warning: This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. See P65Warnings.ca.gov.

Wheel & Tire Fitment

No direct wheel or tire fitment restriction for these frame brackets. Tire clearance is determined by the complete long arm system lift height and your specific wheel offset and backspacing — verify with your complete Clayton Off Road JL long arm kit documentation.

Engineering Question: Are you installing these brackets as part of a complete Clayton Off Road JL long arm kit, or sourcing them as standalone replacement brackets? Confirm your specific long arm kit model to ensure these rear frame brackets are the correct component for your system. Also confirm your JL model year is 2018–2026 — these brackets are JL-specific and will not fit the JK platform.